Archeage

The AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 5050 combination delivers a playable but heavily resolution-dependent experience in Archeage. The data shows a clear trend: the RTX 5050 becomes the limiting factor as resolution increases, while the CPU’s strong multi-threaded performance ensures high frame rates at lower resolutions. This pairing ranks in the 61st percentile of tested combos, indicating a mid-tier performance profile that prioritizes high refresh rates at 1080p over 4K capability.

Resolution Scaling

The measured frames per second (FPS) data reveals a stark and predictable performance cliff as resolution scales from 1920x1080 to 3840x2160. At 1080p with High settings, the combo achieves an average of 82 FPS. Moving to 2560x1440 drops the average to 55 FPS, a reduction of 27 FPS or roughly 33%. The most severe drop occurs when stepping up to 4K, where the average falls to 32 FPS, a further 23 FPS decline from the 1440p result and a total reduction of 50 FPS from 1080p.

This scaling pattern strongly indicates that the NVIDIA GeForce RTX 5050 is the primary bottleneck at higher resolutions. The GPU’s 8 GB of GDDR6 memory on a 128-bit bus, with a bandwidth of 320.0 GB/s, appears insufficient for the demands of 4K rendering in this MMORPG. The pixel rate of 82.30 GPixel/s and texture rate of 205.8 GTexel/s are simply overwhelmed when the render target quadruples from 1080p to 4K.

The data also shows that the scaling is not linear across all settings. At Low settings, the drop from 1080p (136 FPS) to 1440p (91 FPS) is 45 FPS, while the drop from 1440p to 4K (52 FPS) is 39 FPS. This suggests that even at the lowest graphical preset, the GPU is still the limiting factor at 4K. At Medium settings, the pattern is similar: 121 FPS at 1080p, 81 FPS at 1440p, and 47 FPS at 4K.

The most telling evidence of GPU limitation is the performance at Ultra settings. At 4K Ultra, the average FPS collapses to 22, a figure that is barely playable. Even at 1440p Ultra, the average of 38 FPS is below the 60 FPS threshold many gamers consider smooth. The 1080p Ultra result of 56 FPS is acceptable, but the massive drop-off at higher resolutions confirms that the RTX 5050 is not designed for high-fidelity 4K gaming in Archeage.

FAQ

Q: What is the best resolution to play Archeage with this CPU/GPU combo?

A: The data clearly shows 1920x1080 as the optimal resolution. At this setting, even the Ultra preset achieves an average of 56 FPS, while High and Medium presets hit 82 FPS and 121 FPS respectively. The 2560x1440 resolution is playable but requires dropping to High settings for a 55 FPS average, and 4K is not recommended for smooth gameplay.

Q: Is the AMD Ryzen 7 9850X3D holding back the RTX 5050?

A: No, the benchmark results indicate the opposite. The CPU’s passmark_multithread score of 41318 and passmark_single_thread score of 4704 are strong, and the Cinebench R23 multi-core score of 22807 shows robust performance. The FPS drops at higher resolutions are attributed to GPU limitations, not CPU bottlenecks.

Q: How does the RTX 5050 compare to its nearest rivals in terms of raw GPU score?

A: The RTX 5050 has an average benchmark score of 21035. Its nearest rival, the AMD Radeon RX Vega M GL, scores 21153, which is 0.6% higher. The AMD Radeon HD 8970M scores 21237, 1% higher. The AMD Radeon RX 5600 XT scores 20713, which is 1.6% lower. The NVIDIA RTX A4000 Mobile scores 21379, which is 1.6% higher.

Q: What is the expected frame rate at 1440p with Medium settings?

A: The measured data shows an average of 81 FPS at 2560x1440 with Medium settings. The minimum recorded FPS was 69, and the maximum was 93, indicating a reasonably stable experience with some fluctuation.

Q: Is this combo capable of 4K gaming in Archeage?

A: Technically yes, but the experience is poor. The best 4K result is 52 FPS at Low settings. At High settings, the average drops to 32 FPS, and at Ultra it falls to 22 FPS. These numbers are below the threshold for smooth, competitive gameplay.

Q: Does the CPU’s 3D V-Cache provide a measurable benefit in this game?

A: The CPU’s L3 cache is listed as 96 MB shared, which is a significant amount. However, the provided data does not include a direct comparison against a non-X3D CPU. The measured FPS results are the only evidence available, and they show the GPU is the limiting factor at resolutions above 1080p.

CPU Role

The AMD Ryzen 7 9850X3D is a high-end desktop processor with 8 cores and 16 threads, based on the Zen 5 architecture. Its base clock is 4.70 GHz and it boosts to 5.60 GHz, which contributes to a strong single-threaded performance. The passmark_single_thread score of 4704 and Cinebench R23 single-core score of 2228 are indicative of a processor that can handle the primary game logic thread in Archeage without becoming a bottleneck.

In multi-threaded workloads, the CPU excels. The Cinebench R23 multi-core score of 22807 and passmark_multithread score of 41318 demonstrate substantial parallel processing capability. This is relevant for an MMORPG like Archeage, which often has numerous background tasks, such as network handling, asset streaming, and NPC AI calculations, that can utilize multiple cores.

The CPU’s large 96 MB shared L3 cache is a defining feature of the X3D series. In gaming scenarios, a larger cache can improve performance by reducing memory latency and increasing the hit rate for frequently accessed data. However, the measured FPS data in this specific configuration suggests that the GPU is the primary constraint at higher resolutions, meaning the CPU’s cache advantage is likely more visible at 1080p where the frame rates are higher.

The CPU’s memory bandwidth is listed at 89.6 GB/s with dual-channel DDR5 support. This is adequate for feeding the CPU’s cores, but it is significantly lower than the GPU’s 320.0 GB/s bandwidth, which further highlights the GPU as the bottleneck in graphics-intensive scenarios. The CPU sits in the 92nd percentile of all CPUs, indicating it is a top-tier performer, but its potential is not fully utilized by the RTX 5050 at 4K.

How This Combo Ranks

The combination of the AMD Ryzen 7 9850X3D and the NVIDIA GeForce RTX 5050 ranks 1691 out of 2761 tested combinations in Archeage. This places it in the 61st percentile of all combos, meaning it outperforms roughly 61% of the systems tested for this game. This is a mid-pack result, suggesting that while the hardware is capable, it is not among the top-tier configurations for this specific title.

The CPU itself is a high performer, ranking in the 92nd percentile against all CPUs. Its nearest rival, the Intel Core i9-14900, has an average score of 58115, which is 0.5% lower. This indicates the 9850X3D is a top-8% CPU. However, the GPU is a more modest performer, ranking in the 66th percentile of all GPUs. Its nearest rival, the AMD Radeon RX Vega M GL, scores 0.6% higher, while the AMD Radeon RX 5600 XT scores 1.6% lower.

The mismatch between the CPU’s high percentile and the GPU’s mid-tier percentile explains the overall combo rank. The system is balanced for 1080p gaming, where the CPU can push high frame rates and the GPU can keep up. At higher resolutions, the GPU’s lower relative performance drags the combo down the rankings, as evidenced by the significant FPS drops. The rank of 1691 out of 2761 is a direct consequence of this imbalance.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across three resolutions and four quality presets. At 1920x1080, the combo performs admirably. The Low preset yields an average of 136 FPS, the Medium preset achieves 121 FPS with a minimum of 103 and maximum of 139, the High preset delivers 82 FPS, and the Ultra preset manages 56 FPS. These numbers indicate a smooth experience across all settings, with only the Ultra preset approaching the 60 FPS threshold.

At 2560x1440, performance drops noticeably. The Low preset maintains a solid 91 FPS average. The Medium preset achieves 81 FPS, with a minimum of 69 and maximum of 93, which is still playable. The High preset drops to 55 FPS, which is borderline for smooth gameplay. The Ultra preset falls to 38 FPS, which is not recommended for a consistent experience. The gap between Low and Ultra at this resolution is 53 FPS, highlighting the GPU’s struggle with higher graphical fidelity.

At 3840x2160, the RTX 5050 is clearly overmatched. The Low preset averages 52 FPS, which is playable but not ideal. The Medium preset averages 47 FPS, with a minimum of 40 and maximum of 53. The High preset drops to 32 FPS, and the Ultra preset crashes to 22 FPS. The scaling from Low to Ultra at 4K is severe, with a 30 FPS difference, confirming that the GPU’s memory bandwidth and compute resources are insufficient for high-end 4K rendering.

The data shows a consistent pattern: the Medium preset offers the best balance of visual quality and performance at all resolutions. It is the only preset at 4K that maintains an average above 45 FPS, and at 1080p it provides a high refresh rate experience. The High preset is a viable option at 1080p and 1440p, but it struggles at 4K. The Ultra preset is only playable at 1080p.

Settings Recommendations

Based on the measured FPS data, the Medium preset is the optimal choice for the AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 5050 combination in Archeage. At 1920x1080, this preset delivers an average of 121 FPS, which is well above the 60 FPS threshold for smooth gameplay and provides headroom for high refresh rate monitors. The minimum FPS of 103 ensures that dips are rare and minor.

At 2560x1440, the Medium preset remains the best option, yielding an average of 81 FPS. This is a playable experience, though the minimum of 69 FPS indicates some occasional frame drops. For users with a 1440p monitor, this is the recommended preset to balance visual fidelity with performance. The High preset at 55 FPS is acceptable for slower-paced gameplay, but the Medium preset offers a safer margin.

For 4K displays, the Medium preset is the only viable option that provides a somewhat playable experience, with an average of 47 FPS. However, users should consider the Low preset, which achieves 52 FPS, if they prioritize frame rate stability over visual quality. The High and Ultra presets at 4K are not recommended due to average FPS figures of 32 and 22, respectively, which fall below the minimum acceptable threshold for most gamers.

The Low preset is the best choice for competitive play or for users with high refresh rate 1080p monitors. At 136 FPS, it is the only preset that can fully utilize a 144Hz display. The Ultra preset is only recommended for 1080p users who prioritize maximum visual fidelity and can tolerate an average of 56 FPS. In summary, the Medium preset is the best overall recommendation, offering a smooth experience at all three resolutions, while the Low preset is best for maximum frame rates and the High preset is a viable middle ground at 1080p and 1440p.