Archeage

The AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 4080 SUPER pairing delivers a compelling Archeage experience across all tested resolutions, though the data reveals a clear ceiling at 4K Ultra. This combination ranks in the 92nd percentile of all tested combos for this game, with measured frame rates ranging from a demanding 43 FPS at 4K Ultra to a fluid 235 FPS at 1080p Low. The RTX 4080 SUPER’s 16 GB of GDDR6X memory and 736.3 GB/s bandwidth prove more than sufficient for Archeage’s 2014-era engine, while the Ryzen 7 5800XT’s 8-core, 16-thread Zen 3 architecture keeps pace at lower resolutions where CPU overhead becomes more relevant.

FAQ

Q: What is the best resolution to play Archeage with this hardware combo?

A: Based on measured data, 2560x1440 provides the best balance, with 109 FPS at High settings and 180 FPS at Low. At 1080p, High settings achieve 162 FPS, while 4K High drops to 62 FPS, making 1440p the sweet spot for visual quality and performance.

Q: How does the RTX 4080 SUPER compare to its nearest GPU rival in synthetic benchmarks?

A: The RTX 4080 SUPER scores 54,209 in average benchmark score, which is 0.1% lower than the RTX 4080 (54,247), 1.1% higher than the Radeon Pro W5700X (54,828), and 2.7% higher than the Radeon RX 6750 GRE 12 GB (55,698). The deltaPct values show it trails the RX 6750 GRE by 2.7% in this specific aggregate metric.

Q: Which settings preset yields the highest average FPS at 1080p?

A: Low settings produce the highest average at 235 FPS, followed closely by Medium at 226 FPS. Ultra settings drop to 111 FPS, while High sits at 162 FPS. The data shows diminishing returns when moving from Low to Medium, with only a 9 FPS difference.

Q: Does the CPU bottleneck the GPU at 1080p?

A: The Ryzen 7 5800XT’s single-thread score of 959 in 3DMark and 3,359 in Cinebench R23 suggests adequate headroom, but the FPS delta between 1080p Low (235 FPS) and 1440p Low (180 FPS) indicates some CPU limitation at the lowest resolution. The 23% performance drop from 1080p to 1440p at Low settings points to CPU-bound behavior at 1080p.

Q: What is the combo’s ranking among all tested CPU-GPU pairs in Archeage?

A: This combo ranks 297th out of 3,708 tested combinations, placing it in the top 8% of all configurations. This percentile ranking reflects strong overall performance, though not elite-tier for this specific game.

Q: How much FPS is lost when moving from 1080p to 4K at High settings?

A: High settings at 1080p produce 162 FPS, while 4K High drops to 62 FPS—a 62% reduction. This substantial drop indicates the GPU becomes the primary limiting factor at 4K, as the RTX 4080 SUPER’s 52.22 TFLOPS FP32 compute is taxed heavily by the pixel count increase.

GPU Role

The RTX 4080 SUPER’s role in Archeage is defined by its 16 GB of GDDR6X memory on a 256-bit bus, delivering 736.3 GB/s of bandwidth. This memory configuration directly supports the game’s texture streaming and large-scale world rendering, which is characteristic of MMORPGs with expansive zones and numerous player models. The GPU’s 80 RT cores and 320 tensor cores are less relevant for Archeage’s older DirectX 11-era rendering pipeline, but the 10,240 shading units handle the game’s geometry and pixel shading workloads efficiently. Clock speeds of 2,295 MHz base and 2,550 MHz boost provide the raw throughput needed to maintain high frame rates, with the 816.0 GTexel/s texture rate and 285.6 GPixel/s pixel rate explaining the strong performance at 1440p and 1080p.

The measured FPS data shows the GPU’s scaling behavior across settings. At 4K, the jump from Low (103 FPS) to Medium (92 FPS) is modest, but the leap to High (62 FPS) represents a 33% drop, and Ultra (43 FPS) halves the Low setting’s performance. This pattern indicates that Archeage’s Ultra preset introduces effects that heavily tax the GPU’s compute and memory subsystems. The RTX 4080 SUPER’s 52.22 TFLOPS FP32 performance is sufficient for 4K High (62 FPS) but insufficient for 4K Ultra (43 FPS), which likely incorporates additional post-processing and shadow quality that saturate the GPU’s resources.

In terms of synthetic benchmarks, the RTX 4080 SUPER achieves a Passmark G3D score of 34,245 and a Geekbench Vulkan score of 260,075, placing it in the 86th percentile of all GPUs. Its nearest rival, the RTX 4080, scores nearly identically (54,247 vs 54,209 average), confirming that the SUPER variant offers minimal synthetic performance gain in aggregate terms. However, in Archeage specifically, the measured data provides the definitive performance picture—one that shows the GPU dominating performance at 4K while the CPU becomes more relevant at lower resolutions.

Settings Recommendations

Based on the measured FPS rows, the optimal settings preset depends on the target resolution and desired frame rate. At 1080p, Medium settings (226 FPS average) provide a 64 FPS improvement over High (162 FPS) while only sacrificing a small visual fidelity step. The Low preset (235 FPS) offers marginal gains over Medium, suggesting Medium is the better choice for 1080p gaming—it maintains high frame rates while preserving more visual detail. Ultra at 1080p (111 FPS) is playable but represents a significant 49% drop from High, making it difficult to recommend unless visual fidelity is the absolute priority.

For 1440p, High settings (109 FPS) deliver smooth gameplay on high-refresh monitors, while Medium (161 FPS) exceeds the refresh rate of most 1440p displays (typically 144-165 Hz). The Low preset (180 FPS) provides the highest headroom, but the 71 FPS difference between Low and High at 1440p suggests High is the sweet spot for balanced experience. Ultra at 1440p (74 FPS) remains playable but falls below the 100 FPS threshold that many gamers consider smooth, making it a secondary option.

At 4K, the choices are more constrained. Low settings (103 FPS) achieve smooth performance, while Medium (92 FPS) stays above 90 FPS. High (62 FPS) is playable for slower-paced content but may feel less responsive in combat scenarios. Ultra (43 FPS) is borderline unplayable for an MMORPG where quick reactions matter. The data suggests 4K Medium is the best compromise—it maintains 92 FPS average with a 78 FPS minimum, keeping both the average and minimum above playable thresholds. The minimum FPS of 78 at 4K Medium indicates that even in demanding scenes, the hardware avoids severe drops, whereas the Ultra preset’s 43 FPS average leaves no safety margin for frame time spikes.

How This Combo Ranks

The comboRankInGame field places this CPU-GPU pairing at rank 297 out of 3,708 tested combinations in Archeage. This position, in the top 8% of all configurations, reflects the synergy between the Ryzen 7 5800XT and RTX 4080 SUPER. The CPU’s percentileVsAllCpus of 81 indicates it outperforms 81% of all CPUs in the database, while the GPU’s percentileVsAllGpus of 86 shows it beats 86% of all GPUs. When combined, these components produce a system that handles Archeage well but not exceptionally—there are 296 combinations that achieve better performance, likely featuring higher-end CPUs like the Ryzen 7 7840H (which scores 29,868 average vs the 5800XT’s 29,879) or GPUs beyond the RTX 4080 SUPER’s tier.

The ranking is particularly informative when considering the CPU’s position relative to its nearest rivals. The Ryzen 7 5800XT’s average benchmark score of 29,879 places it within 0.3% of the Ryzen 7 8845HS (29,955) and Ryzen 7 7840HS (29,955), while being 0.6% ahead of the Ryzen 5 9600X (29,713). This tight clustering suggests that CPU choice within this performance band has minimal impact on Archeage’s frame rates, especially at higher resolutions where the GPU dominates. The 297th ranking among 3,708 combos means that the limiting factor for this setup is likely not the CPU, but rather the GPU’s performance ceiling at Ultra settings and 4K resolution.

In practical terms, this rank translates to a system that can handle Archeage’s most demanding scenarios—large-scale PvP battles, crowded cities, and raid encounters—without dropping below playable frame rates at 1440p High. The gap between this combo and the top-ranked configurations likely stems from the GPU tier; the RTX 4080 SUPER, while powerful, sits in the 86th percentile of GPUs, meaning 14% of GPUs perform better in aggregate benchmarks. For a 2014 MMORPG, this hardware is more than adequate, as evidenced by the 162 FPS at 1080p High, but the rank shows that enthusiast-grade setups with higher-tier GPUs can push even higher.

Resolution Scaling

The measured FPS data reveals a clear pattern of GPU-bound scaling as resolution increases. At High settings, the progression from 1080p (162 FPS) to 1440p (109 FPS) to 4K (62 FPS) shows a consistent 33% drop for each resolution step. This geometric progression—1080p to 1440p is a 1.78x pixel increase, and 1440p to 4K is a 2.25x pixel increase—indicates that the RTX 4080 SUPER’s rendering throughput scales predictably with pixel count. The 62% total reduction from 1080p to 4K at High settings is consistent with the GPU’s 52.22 TFLOPS FP32 capacity being the limiting factor, as the CPU’s contribution remains constant across resolutions.

For Low settings, the scaling is more linear: 235 FPS at 1080p, 180 FPS at 1440p, and 103 FPS at 4K. The smaller percentage drops (23% and 43% respectively) suggest that at Low settings, the CPU begins to play a more significant role at 1080p. The Ryzen 7 5800XT’s 16 threads and 3.80 GHz base clock (4.80 GHz boost) are sufficient to feed the GPU at 1080p Low, but the 235 FPS figure approaches the CPU’s practical limit for Archeage’s single-threaded engine. The 180 FPS at 1440p Low still exceeds the 165 Hz refresh rate of many gaming monitors, so this resolution is not problematic.

The Medium settings data provides the most complete picture, with min and max FPS recorded. At 1080p Medium, the 226 FPS average with a 192 FPS minimum and 259 FPS maximum shows consistent frame pacing. At 1440p Medium, the 161 FPS average with 136 FPS minimum and 185 FPS maximum maintains smoothness above 130 FPS. At 4K Medium, the 92 FPS average with 78 FPS minimum and 106 FPS maximum demonstrates that even at 4K, the hardware avoids severe frame drops—the 78 FPS minimum is only 15% below the average. This consistency across resolutions indicates that the RTX 4080 SUPER’s 16 GB VRAM and 736.3 GB/s bandwidth prevent texture streaming bottlenecks, which often cause stuttering in open-world games.

Ultra settings show the steepest resolution scaling: 111 FPS at 1080p, 74 FPS at 1440p, and 43 FPS at 4K. The 61% drop from 1080p to 4K Ultra is more severe than the 62% drop at High settings, suggesting that Ultra’s additional effects (likely higher shadow resolution, ambient occlusion, and draw distance) amplify the GPU’s workload disproportionately at higher pixel counts. The 43 FPS at 4K Ultra is the only measured result below 60 FPS, confirming that this preset is too demanding for this GPU at 4K.

Measured FPS Breakdown

At 1080p, the full settings spectrum is playable. Low settings produce an average of 235 FPS, making this the highest measured frame rate for this combo. Medium settings deliver 226 FPS average with a 192 FPS minimum and 259 FPS maximum, showing excellent frame consistency. High settings achieve 162 FPS, which remains well above the 144 Hz refresh rate common on 1080p gaming monitors. Ultra settings drop to 111 FPS, still smooth but representing a 53% reduction from Low. The 235 FPS at Low and 226 FPS at Medium indicate that the CPU is nearing its limit—the 9 FPS difference between these presets is minimal, suggesting the Ryzen 7 5800XT’s single-thread performance (959 in 3DMark single-thread) is the bottleneck rather than the GPU.

At 1440p, the performance remains strong across all presets. Low settings average 180 FPS, providing ample headroom for high-refresh 1440p displays. Medium settings produce 161 FPS average with a 136 FPS minimum and 185 FPS maximum—the minimum stays above 130 FPS, ensuring no noticeable dips during intensive combat. High settings average 109 FPS, which is suitable for 100 Hz monitors but may not fully saturate 144 Hz displays. Ultra settings drop to 74 FPS, which is playable but noticeably less smooth than the lower presets. The 71 FPS difference between Low (180) and High (109) at 1440p highlights the GPU’s sensitivity to Archeage’s High preset features, while the 35 FPS gap between High (109) and Ultra (74) shows that Ultra’s additional effects are particularly taxing.

At 4K, the data reveals the hardware’s limits. Low settings average 103 FPS, which is excellent for 4K gaming and suggests that even demanding scenes will stay above 80 FPS. Medium settings average 92 FPS with a 78 FPS minimum and 106 FPS maximum—the minimum is just below the 80 FPS threshold that many consider the floor for smooth 4K gameplay, but the average remains high. High settings drop to 62 FPS, which is playable for exploration and questing but may feel less responsive in PvP encounters. Ultra settings average 43 FPS, which falls below the 60 FPS standard and would likely cause noticeable stuttering in crowded areas. The progression from 103 FPS (Low) to 92 FPS (Medium) to 62 FPS (High) to 43 FPS (Ultra) at 4K shows that each settings tier imposes a significant GPU cost, with the High preset representing a 33% reduction from Medium and Ultra adding another 31% reduction from High.

The complete dataset shows that the RTX 4080 SUPER is best utilized at 1440p High (109 FPS) or 4K Medium (92 FPS), depending on whether resolution or visual fidelity takes priority. The 4K Medium result, with its 78 FPS minimum, provides the most consistent experience at 4K, while 1440p High offers higher average frame rates with the same visual preset tier. For players prioritizing competitive performance, 1080p Medium (226 FPS) or 1440p Low (180 FPS) deliver the highest frame rates, but the 16 GB VRAM and 736.3 GB/s bandwidth of the RTX 4080 SUPER are underutilized at these settings—the GPU’s headroom suggests that visual quality should be increased before resolution is reduced.