Archeage

Archeage is a 2014 MMORPG that remains surprisingly demanding at higher settings, and the combination of the AMD Ryzen 7 5800X with the NVIDIA GeForce RTX 4080 SUPER produces a wide spread of performance depending on how you configure it. The measured data shows this pairing is capable of high refresh rates at 1080p and 1440p, but 4K Ultra pushes it to the edge of playability. This analysis breaks down exactly what those numbers mean for your experience, based strictly on the measured FPS rows.

Resolution Scaling

The FPS drop from 1080p to 4K is significant across all settings, but the shape of that drop tells you where the bottleneck lies. At Low settings, the average FPS falls from 229 at 1920x1080 to 180 at 2560x1440, then to 103 at 3840x2160. That is a 55% reduction from 1080p to 4K, which is a steep curve that suggests the GPU is becoming the limiting factor as pixel count rises. The RTX 4080 SUPER’s 16 GB of GDDR6X memory and 736.3 GB/s bandwidth are being pushed harder at 4K, and the data reflects that.

At Medium settings, the scaling is similar but slightly less dramatic: 220 FPS at 1080p, 161 FPS at 1440p, and 92 FPS at 4K. The gap between 1080p and 1440p is 59 FPS, while the gap between 1440p and 4K is 69 FPS. This indicates that the GPU load is increasing roughly in line with pixel count, and the CPU has enough headroom to keep up even as the resolution climbs. The Ryzen 7 5800X, with its 8 cores and 16 threads, is not showing signs of holding the system back at these settings.

High settings show a more pronounced drop: 162 FPS at 1080p, 109 FPS at 1440p, and 62 FPS at 4K. The 4K figure is less than half of the 1080p number, which points to the GPU being the primary constraint. The RTX 4080 SUPER’s boost clock of 2550 MHz is working hard, but the increased shading and texture work at High settings on a 2014 engine is clearly taxing the card.

Ultra settings produce the steepest curve of all: 111 FPS at 1080p, 74 FPS at 1440p, and just 43 FPS at 4K. That 4K Ultra result is barely above the 30 FPS minimum for playability, and it is a 61% drop from the 1080p figure. This is a case where the GPU is definitively the limiting component; the CPU’s single-thread score of 1574.5 in Cinebench R23 is not the issue here, as the frame rate collapses primarily due to pixel and effect load.

The limiting component shifts based on resolution. At 1080p, the high average FPS across all settings suggests the CPU is still keeping pace, but the GPU is already near its ceiling at Ultra. At 4K, the GPU is clearly the bottleneck, especially at Ultra where the 43 FPS average indicates the RTX 4080 SUPER cannot maintain fluid motion. The data shows that this combo is best suited for 1440p gaming, where even High settings deliver 109 FPS and Medium hits 161 FPS.

Settings Recommendations

The measured rows make it clear that Medium is the sweet spot for this game and this hardware combo. At 1920x1080, Medium delivers 220 FPS average with a minimum of 187 FPS, which is well above any refresh rate you would likely target. At 2560x1440, Medium provides 161 FPS average with a 136 FPS minimum, which is ideal for high-refresh monitors. Even at 3840x2160, Medium manages 92 FPS average with a 78 FPS minimum, making it the only setting that keeps 4K above the 60 FPS threshold.

High settings are a viable alternative for 1440p users. The 109 FPS average at 2560x1440 is still smooth, and the visual quality improvement over Medium may justify the 52 FPS drop. However, at 4K, High falls to 62 FPS, which is playable but not ideal for fast-paced combat. Low settings offer the highest frame rates—229 FPS at 1080p and 180 FPS at 1440p—but the visual compromise is likely too severe for a game that relies on world immersion.

Ultra is the outlier. At 1080p, it still hits 111 FPS, which is respectable, but at 1440p it drops to 74 FPS, and at 4K it collapses to 43 FPS. The jump from High to Ultra costs 51 FPS at 1080p, 35 FPS at 1440p, and 19 FPS at 4K. The data does not include min FPS for Ultra, so the stability is unknown, but the average figures suggest that Ultra is only worth using at 1080p.

For the best balance of visual fidelity and performance, Medium is the recommended preset. It provides the highest minimum FPS at each resolution, which is critical for an MMORPG where frame pacing during large group fights matters. If you have a 1440p monitor, Medium is the clear choice. If you are on 1080p, both Medium and High are excellent, with Medium offering a 58 FPS advantage over High. At 4K, Medium is the only sensible option, as it is the sole preset that stays above 60 FPS.

GPU Role

The RTX 4080 SUPER is the dominant component in this pairing, and its specifications directly explain the measured results. The GPU has 16 GB of GDDR6X memory on a 256-bit bus, yielding 736.3 GB/s of bandwidth. This memory capacity is more than enough for Archeage, even at 4K Ultra, but the bandwidth is what allows the card to maintain higher frame rates at lower settings. The base clock of 2295 MHz and boost clock of 2550 MHz provide the raw compute that drives the 52.22 TFLOPS FP32 performance.

The GPU’s role becomes more critical as resolution increases. At 1080p, the card is not fully utilized at Low or Medium settings, which is why the CPU can keep up with 229 FPS and 220 FPS averages. But at 4K Ultra, the GPU’s 10240 shading units are working at full capacity, and the 43 FPS average shows that even this high-end card struggles with the engine’s inefficiencies at maximum settings. The 112 ROPs and 320 TMUs are likely the limiting factors at 4K, as the pixel fill rate of 285.6 GPixel/s is being saturated.

The VRAM is not a concern here. The 16 GB capacity is far above what Archeage would need, even at 4K with high-resolution textures. The measured FPS drops from High to Ultra at 4K—62 to 43—are more likely due to the increased shading and effect loads than memory pressure. The card’s 320 tensor cores and 80 RT cores are not relevant for this game, as Archeage does not use ray tracing or DLSS, so their presence does not impact the measured results.

The GPU’s benchmark scores corroborate its gaming performance. The Passmark G3D score of 34245 places it in the 86th percentile of all GPUs, and its nearest rival, the RTX 4080, is only 0.1% behind with a score of 54247 versus 54209. This indicates that the 4080 SUPER is a top-tier card, but Archeage’s aging engine does not fully leverage its capabilities. The 4K Ultra result of 43 FPS is a reminder that raw GPU power does not always translate to playable frame rates in older MMOs.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings produce 229 FPS average, Medium produces 220 FPS with a 187 FPS minimum and 253 FPS maximum, High produces 162 FPS, and Ultra produces 111 FPS. The gap between Medium and High is 58 FPS, while the gap between High and Ultra is 51 FPS, showing that each step up in settings comes with a substantial cost.

At 2560x1440, the numbers are still strong but lower. Low settings hit 180 FPS, Medium hits 161 FPS with a 136 FPS minimum and 185 FPS maximum, High hits 109 FPS, and Ultra hits 74 FPS. The drop from 1080p to 1440p is consistent: Low loses 49 FPS, Medium loses 59 FPS, High loses 53 FPS, and Ultra loses 37 FPS. This roughly proportional scaling confirms that the GPU is handling the extra pixels efficiently.

At 3840x2160, the performance becomes more varied. Low settings still manage 103 FPS, which is surprisingly playable, but Medium drops to 92 FPS with a 78 FPS minimum and 106 FPS maximum. High falls to 62 FPS, and Ultra drops to 43 FPS. The gap between Low and Medium at 4K is only 11 FPS, but the gap between Medium and High is 30 FPS, and between High and Ultra is 19 FPS. This suggests that the engine becomes more GPU-bound at 4K, with each settings tier having a disproportionate effect.

The min FPS data is only available for Medium settings at each resolution. At 1080p, the min is 187 FPS; at 1440p, it is 136 FPS; and at 4K, it is 78 FPS. These figures are all well above playable thresholds, indicating that Medium settings provide consistent frame pacing. The lack of min FPS data for other settings means we cannot verify their stability, but the averages suggest that Low and High are likely stable enough, while Ultra’s lower averages might introduce dips.

How This Combo Ranks

In the database of tested combinations, this pairing of the Ryzen 7 5800X and RTX 4080 SUPER ranks 322nd out of 3708 combos for Archeage. That places it in the top 8.7% of all tested systems, which is a strong result. The rank reflects the combo’s ability to handle the game across multiple resolutions and settings, with the 1440p Medium result of 161 FPS being a standout performance.

The CPU’s own ranking helps contextualize this. The Ryzen 7 5800X sits in the 81st percentile of all CPUs, with an average benchmark score of 29123. Its nearest rival, the Intel Core Ultra 5 135H, scores 29093, which is only 0.1% behind. The Intel Core i5-13500HX is 0.5% behind at 29270, while the AMD Ryzen 5 5600XT is 0.6% ahead at 28940. This shows the 5800X is a solid mid-range performer, but not a top-tier chip by 2024 standards.

The GPU’s ranking is more impressive. The RTX 4080 SUPER is in the 86th percentile of all GPUs, with an average benchmark score of 54209. Its nearest rival, the RTX 4080, scores 54247, which is only 0.1% behind. The AMD Radeon Pro W5700X is 1.1% behind at 54828, and the AMD Radeon RX 6750 GRE 12 GB is 2.7% behind at 55698. This places the 4080 SUPER near the top of the GPU hierarchy, which is why the combo ranks well even in a demanding game.

The 322nd rank out of 3708 is a reflection of the GPU’s strength more than the CPU’s. In a game like Archeage, which is not heavily multithreaded, the CPU’s 8 cores and 16 threads are sufficient, but the GPU’s raw power drives the higher frame rates. The fact that this combo outranks 3386 other combinations indicates that it is a well-balanced pairing for this specific title, even if the CPU is not the fastest available.

FAQ

Q: Is the AMD Ryzen 7 5800X sufficient for Archeage at 1440p?

A: Yes. The measured data shows 109 FPS at High settings and 161 FPS at Medium settings for 2560x1440. The CPU’s 8 cores and 16 threads, combined with a single-thread score of 1574.5 in Cinebench R23, are more than enough to keep up with the GPU at this resolution.

Q: Can the RTX 4080 SUPER run Archeage at 4K smoothly?

A: It depends on settings. At Medium, the average FPS is 92 with a 78 FPS minimum, which is smooth. At High, it drops to 62 FPS, which is playable but less fluid. At Ultra, it falls to 43 FPS, which is below the 60 FPS target for most players.

Q: What is the best setting preset for this combo?

A: Medium is the best choice. It delivers 220 FPS at 1080p, 161 FPS at 1440p, and 92 FPS at 4K, with the highest minimum FPS at each resolution. High is a good alternative for 1440p, but Medium offers the best balance of visual quality and performance.

Q: How does this combo compare to other tested systems?

A: It ranks 322nd out of 3708 tested combinations, placing it in the top 8.7%. The RTX 4080 SUPER is in the 86th percentile of all GPUs, and the Ryzen 7 5800X is in the 81st percentile of all CPUs, making this a strong pairing for Archeage.

Q: Is the 16 GB VRAM on the RTX 4080 SUPER necessary for Archeage?

A: No. The game is from 2014 and does not require that much memory. The 16 GB capacity is more than sufficient, and the measured FPS drops at 4K Ultra are not due to VRAM limits but rather the GPU’s shading and fill rate capabilities.

Q: Does the CPU bottleneck the GPU in this game?

A: No, not at higher resolutions. At 4K, the GPU is clearly the limiting factor, as shown by the 43 FPS Ultra result. At 1080p, the CPU keeps up well, with Low settings hitting 229 FPS. The bottleneck shifts to the GPU as resolution increases.