Archeage
This combination provides smooth gameplay with an average of 114 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 43 | 59 | 89 | 101 |
| 1440p QHD | 71 | 104 | 149 | 154 |
| 1080p Full HD | 108 | 144 | 171 | 178 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 7 3700X + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis
The benchmark data for Archeage with the AMD Ryzen 7 3700X and NVIDIA GeForce RTX 5070 Ti shows a clear pattern of performance scaling across resolutions and settings. This analysis walks through the measured frame rates, the role of each component, and how this specific combination stacks up against other tested configurations.
Resolution Scaling
The frame rate drop from 1080p to 4K is substantial and follows a predictable path. At High settings, the average FPS moves from 143.9 at 1920x1080 down to 104.3 at 2560x1440, and finally to 59.2 at 3840x2160. That represents a 27.5% reduction from 1080p to 1440p, and a further 43.2% reduction from 1440p to 4K. The total drop from 1080p to 4K is 58.9%, indicating that the GPU is becoming the primary limiting factor as pixel count rises.
The scaling pattern at Low settings tells a different story. At 1920x1080, the combo achieves 178.2 FPS, which drops to 154.2 at 2560x1440 and then to 100.8 at 3840x2160. The 1080p to 1440p reduction is only 13.5%, suggesting that at lower settings the CPU still has headroom to feed the GPU. However, the 1440p to 4K drop of 34.6% shows the RTX 5070 Ti beginning to hit its limits even at Low preset.
Ultra settings produce the most pronounced scaling. The measured average FPS is 108.3 at 1080p, 71.2 at 1440p, and 43.2 at 4K. The 1080p to 1440p drop is 34.3%, and the 1440p to 4K drop is 39.3%. This indicates that at Ultra, the combination of high resolution and maximum graphical features creates a compounding load that neither component can fully offset. The data shows that 4K Ultra is only playable at 43.2 FPS, which is below the 60 FPS threshold many users target.
GPU Role
The RTX 5070 Ti brings 16 GB of GDDR7 memory on a 256-bit bus, providing 896.0 GB/s of bandwidth. This memory configuration is directly relevant to Archeage’s scaling behavior, as the game’s asset streaming at higher resolutions benefits from both capacity and bandwidth. The GPU’s boost clock of 2452 MHz and base clock of 2295 MHz support its compute capacity, which includes 8960 shading units and 280 texture mapping units.
In the benchmark results, the GPU’s role becomes more evident at 4K. The difference between Low (100.8 FPS) and High (59.2 FPS) at 3840x2160 is 41.2 FPS, indicating that the GPU is heavily taxed by the increased settings. At 1080p, the same Low-to-High gap is only 34.3 FPS (178.2 vs 143.9), meaning the CPU is better able to keep the GPU fed at lower resolutions. The RTX 5070 Ti’s 96 ROPs and pixel rate of 235.4 GPixel/s contribute to its ability to push high frame rates at 1080p, but the 4K Ultra result of 43.2 FPS shows the limits of this configuration in a demanding MMORPG environment.
How This Combo Ranks
This specific combination of the Ryzen 7 3700X and RTX 5070 Ti ranks 306 out of 1727 tested combos in Archeage. That places it in the top 17.7% of all configurations, which is a strong showing for a mid-generation CPU paired with a current-generation GPU. The rank reflects the balanced nature of the pairing, though the data suggests the CPU is the weaker link in the chain.
The CPU’s average benchmark score of 28631 puts it nearly identical to its nearest rivals. The Intel Core i5-12600 scores 28654, a delta of -0.1%, while the AMD Ryzen 5 5600XT scores 28591, a delta of 0.1%. This clustering means the Ryzen 7 3700X is not a performance outlier in synthetic tests, and its 85th percentile ranking among all CPUs confirms it sits comfortably above average. However, the GPU’s percentile ranking of 87th among all GPUs, with an average score of 52086, shows that the graphics card is the stronger component in this pairing.
FAQ
Q: What is the best resolution for this combo in Archeage?
A: The data shows 2560x1440 at Medium settings provides 148.8 FPS, which is high enough for smooth gameplay while still offering improved image quality over 1080p. At 4K, only Low settings exceed 100 FPS, so 1440p represents the sweet spot for balance.
Q: How much faster is the 1080p Low preset compared to 4K Ultra?
A: The 1920x1080 Low preset averages 178.2 FPS, while 3840x2160 Ultra averages 43.2 FPS. This represents a 4.1x difference in frame rate, showing that resolution and settings have a massive impact on performance in this game.
Q: Is the RTX 5070 Ti the limiting factor at 4K?
A: The evidence points to yes. At 4K, the frame rate drops from 100.8 at Low to 43.2 at Ultra, a 57.1% reduction. This large drop with settings changes indicates the GPU is the primary bottleneck at this resolution.
Q: How does this combo compare to the RTX 4080 in synthetic benchmarks?
A: The RTX 5070 Ti has an average benchmark score of 52086, which is essentially identical to the RTX 4080’s 52085, a delta of 0%. This means the two GPUs are performance equivalents in general compute tasks.
Q: What settings provide 60+ FPS at 4K?
A: Both Low (100.8 FPS) and Medium (89.4 FPS) settings exceed 60 FPS at 3840x2160. High settings just miss the mark at 59.2 FPS, while Ultra falls well below at 43.2 FPS.
Settings Recommendations
For users targeting 60 FPS at 3840x2160, the Medium preset is the optimal choice. It delivers 89.4 FPS, which provides a comfortable margin above the 60 FPS threshold while maintaining more visual fidelity than Low. The High preset at 59.2 FPS is technically below 60, so Medium is the safer recommendation for consistent frame pacing.
At 2560x1440, the High preset at 104.3 FPS offers the best experience for users with high refresh rate monitors. It sits well above 60 FPS and provides significantly better visual quality than Medium (148.8 FPS) or Low (154.2 FPS). The Ultra preset at 71.2 FPS is also viable for those prioritizing image quality over raw frame rate.
At 1920x1080, the Ultra preset at 108.3 FPS is the clear recommendation. It exceeds 100 FPS while providing the maximum visual quality, which is particularly relevant for an MMORPG where long viewing distances and many on-screen characters benefit from higher settings. The High preset at 143.9 FPS is unnecessary at this resolution, as the frame rate gain from dropping to High is not worth the visual trade-off.
CPU Role
The Ryzen 7 3700X features 8 cores and 16 threads, with a base clock of 3.60 GHz and a boost clock of 4.40 GHz. Its 32 MB of L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth are adequate for feeding the RTX 5070 Ti in most scenarios. The CPU’s 65 W TDP and 7 nm process node from TSMC are notable for efficiency, but the data suggests its processing power is the limiting factor in this pairing.
In synthetic benchmarks, the Ryzen 7 3700X scores 19087 in Cinebench R23 multi-core and 2694 in single-core. These scores, combined with its 85th percentile ranking, show it is a capable processor. However, the near-identical scores to its nearest rivals (all within 0.2% deltaPct) indicate that it is not a performance leader in its class. The 16 threads help with multi-tasking, but Archeage’s performance at lower resolutions shows the CPU’s influence, particularly at 1080p Low where the 178.2 FPS result suggests the GPU is not the bottleneck.
The CPU’s role is most apparent when comparing 1080p and 1440p results. At Low settings, the 1080p to 1440p drop is only 13.5%, which shows the CPU can handle the increased pixel load without significant frame loss. However, at Ultra settings, the same resolution change produces a 34.3% drop, indicating that the CPU’s limited single-thread performance becomes more relevant when the game is doing more work per frame. The data shows that while the Ryzen 7 3700X is sufficient for this game at most settings, it does cap the system’s maximum achievable frame rates in CPU-bound scenarios.
Hardware Specifications
AMD Ryzen 7 3700X
NVIDIA GeForce RTX 5070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 3700X + NVIDIA GeForce RTX 5070 Ti in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 100.8 |
| 3840x2160 | Medium | 89.4 |
| 3840x2160 | High | 59.2 |
| 3840x2160 | Ultra | 43.2 |
| 2560x1440 | Low | 154.2 |
| 2560x1440 | Medium | 148.8 |
| 2560x1440 | High | 104.3 |
| 2560x1440 | Ultra | 71.2 |
| 1920x1080 | Low | 178.2 |
| 1920x1080 | Medium | 171.3 |
| 1920x1080 | High | 143.9 |
| 1920x1080 | Ultra | 108.3 |
Archeage with Ryzen 7 3700X + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RTX 5070 Ti + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 7 3700X + RTX 5070 Ti
Explore FPS benchmarks for other games using this same hardware combination.