Archeage

The AMD Ryzen 7 3700X and Intel Arc B570 combination delivers a playable but not exceptional experience in Archeage, with the data showing a clear ceiling at 1080p High settings. The combo ranks in the 22nd percentile of tested configurations, indicating that while it can handle the game, it is far from the top of the performance hierarchy. The measured frames per second reveal a system that is heavily influenced by both CPU and GPU capabilities, with the balance shifting depending on the resolution and settings chosen.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 3700X is an 8-core, 16-thread processor based on the Zen 2 architecture, codenamed Matisse, and built on a 7 nm process. It operates with a base clock of 3.60 GHz and a boost clock of 4.40 GHz, featuring a 32 MB L3 cache. This configuration provides substantial multi-threaded capability, which is relevant for an MMORPG like Archeage where numerous players, NPCs, and world events can generate significant CPU load. The processor's benchmark scores reinforce this strength, with a Passmark multithread score of 22458 and a Geekbench multicore score of 8899, placing it in the 84th percentile of all CPUs. Its nearest rivals in overall average benchmark score include the AMD Ryzen AI 7 350 and the AMD EPYC 4244P, both within 0.1% of its score, and the Intel Core i5-13450HX, which is 0.2% slower, showing that the 3700X remains competitive in general processing power.

In the context of Archeage, the CPU's role is evident when examining the frame rate scaling across settings at a fixed resolution. At 1080p, the average FPS drops from 110 at Low settings to 98 at Medium, a 12 FPS reduction, and then to 66 at High, a further 32 FPS decline. This steep drop from Medium to High suggests that the game's higher preset introduces more complex CPU-bound tasks, such as increased draw distances or more sophisticated AI calculations. The single-core performance, with a Geekbench singlecore score of 1593 and a Passmark single_thread score of 2656, is adequate but not outstanding. For an MMORPG, single-thread performance often dictates the minimum frame rate in crowded areas, and the data indicates that the 3700X can maintain reasonable averages but may struggle to keep minimums high when the game world becomes busy.

The 3700X's TDP of 65 W and support for DDR4 memory with a dual-channel bus and 51.2 GB/s bandwidth mean it is not a bottleneck in a traditional sense. However, the benchmark results show that at lower resolutions like 1080p, the CPU is more likely to be the limiting factor, as the GPU has more headroom to render frames quickly. The processor's 16 threads can handle the game's multi-threaded workload, but the architecture's per-core performance is not top-tier, which is a notable consideration for a title that relies heavily on physics and player interactions. The data suggests that in Archeage, the 3700X provides a solid foundation, but its performance ceiling is defined more by its single-threaded capabilities than its multi-threaded count.

GPU Role — VRAM, clocks, and how they relate to this game's results

The Intel Arc B570 is a graphics card based on the Xe2-HPG architecture, codenamed Battlemage, and manufactured on a 5 nm process. It features 10 GB of GDDR6 memory on a 160-bit bus, yielding a bandwidth of 380.0 GB/s, and operates with a base and boost clock of 2500 MHz. The GPU's memory configuration is ample for an MMORPG like Archeage, which relies on large texture sets for environments and character models. The card's benchmark scores, including a Passmark G3D score of 14195 and a 3DMark Steel Nomad DX12 score of 2649, place it in the 65th percentile of all GPUs. Its nearest rivals include the NVIDIA GeForce RTX 3070 Mobile, which is 0.1% faster, and the Intel Arc A750, which is 0.1% slower, indicating that the B570 sits in a mid-range performance bracket.

In Archeage, the GPU's role becomes more prominent as resolution increases. At 1080p, the card can push high frame rates, with an average of 110 FPS at Low settings, but this drops to 66 FPS at High, showing that the GPU is handling the increased graphical load. The card's 10 GB VRAM is likely sufficient for the game's texture requirements, as there is no evidence of a memory-related bottleneck in the measured data. The GPU's shading units (2304) and texture units (144) support its rendering capabilities, and its FP32 performance of 11.52 TFLOPS provides the compute power needed for modern effects.

The Arc B570's performance relative to the CPU is interesting. At 1080p Low, the system achieves 110 FPS, which is a strong result, but at 1440p, the average drops to 74 FPS at Low settings, a 36 FPS reduction. This scaling indicates that the GPU is starting to become a limiting factor at higher resolutions, as it must render more pixels. The card's 80 ROPs and pixel rate of 200.0 GPixel/s are adequate, but they do not allow for significant overperformance in a demanding scenario. The data shows that the B570 is a capable mid-range card that can handle Archeage at playable frame rates, but its performance is not stellar, particularly at 4K where the average FPS falls below 30 at High settings.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data for the Ryzen 7 3700X and Arc B570 combination in Archeage reveals a clear pattern of performance degradation as resolution increases, which helps identify the primary limiting component. At 1080p High settings, the system averages 66 FPS, while at 1440p High, it drops to 45 FPS, a 21 FPS or roughly 32% reduction. Moving to 4K High, the average falls further to 26 FPS, a 19 FPS or 42% drop from 1440p. This progressive decline is expected as the GPU must render exponentially more pixels, but the magnitude of the drops provides insight into the system's balance.

The scaling from 1080p to 1440p at High settings shows a significant performance hit, indicating that the GPU is becoming more stressed as the resolution increases. However, the drop from 1440p to 4K is even steeper, suggesting that the Arc B570's rendering capabilities are being stretched to their limits at 4K. At 1080p Low, the system achieves 110 FPS, but at 1440p Low, it drops to 74 FPS, and at 4K Low, it falls to 42 FPS. The relative consistency of these drops across settings suggests that the GPU is the primary bottleneck at higher resolutions, as the CPU has enough headroom to feed the GPU frames at 1080p but cannot compensate for the increased pixel workload at 4K.

Conversely, at 1080p, the CPU's role is more apparent. The difference between 1080p Low (110 FPS) and 1080p High (66 FPS) is 44 FPS, which is a larger absolute drop than the difference between 1440p Low (74 FPS) and 1440p High (45 FPS), which is 29 FPS. This suggests that at 1080p, the CPU is more involved in the performance equation, as the GPU can render frames quickly but the CPU must process the game's logic and draw calls. The data indicates that the system is balanced at 1440p, where both components contribute to the performance, but at 4K, the GPU is unequivocally the limiting factor, as the frame rates become low irrespective of settings, with Ultra settings only achieving 17 FPS.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the AMD Ryzen 7 3700X and Intel Arc B570 ranks 2222 out of 2761 tested combos in Archeage, placing it in the 80th percentile of performance among all tested systems. This is a low ranking, indicating that the system is on the slower end of the spectrum for this game. The data shows that the combo is not a top-tier performer, and its position in the rankings reflects the limitations of both the CPU and GPU in the context of an MMORPG that can be demanding on multiple fronts.

This ranking is consistent with the measured FPS data, which shows playable frame rates at 1080p and 1440p but struggles at 4K. The combo's position also suggests that many other tested configurations, likely featuring more powerful CPUs or GPUs, can achieve higher frame rates. The Ryzen 7 3700X, while a solid mid-range processor, is not the fastest, and the Arc B570, while competent, is not a high-end graphics card. The combination of these two mid-range components results in a system that can play Archeage but does not excel, making it a lower-tier option for gamers who prioritize high frame rates or high-resolution gameplay.

The ranking also highlights the importance of balancing components. The data shows that the system's performance is not bottlenecked by a single component, but rather the aggregate capability of the CPU and GPU. At 1080p, the system can achieve 66 FPS on High settings, which is acceptable, but at 4K, it falls below 30 FPS, which is not ideal for a smooth experience. The combo's rank of 2222 out of 2761 suggests that while it is not the worst, there is a significant number of systems that perform better, and gamers looking for a high-performance experience should consider other options.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data for Archeage with the AMD Ryzen 7 3700X and Intel Arc B570 is detailed across three resolutions and four settings presets. At 1920x1080, the system achieves an average of 110 FPS at Low settings, 98 FPS at Medium, 66 FPS at High, and 45 FPS at Ultra. The Medium preset also has recorded min and max FPS of 83 and 112, respectively, indicating some variability in performance. The drop from Low to High is significant, showing that the game's higher presets demand more from the system.

At 2560x1440, the average FPS is 74 at Low, 66 at Medium, 45 at High, and 31 at Ultra. The Medium preset shows a min of 56 and a max of 76 FPS, which is a tighter range than at 1080p, suggesting more consistent performance at this resolution. The drop from Low to High is 29 FPS, which is less steep than at 1080p, but the overall frame rates are lower, indicating that the GPU is more stressed. At 3840x2160, the average FPS is 42 at Low, 38 at Medium, 26 at High, and 17 at Ultra. The Medium preset has a min of 32 and a max of 43 FPS, showing that even at 4K, the system can maintain some consistency, but the frame rates are low.

These numbers reveal that the system is capable of providing a playable experience at 1080p and 1440p, but at 4K, it falls short of the 60 FPS target. The data also shows that the Ultra preset is not viable at any resolution, with the highest average being 45 FPS at 1080p. The High preset at 1440p provides 45 FPS, which is borderline, while the High preset at 1080p provides 66 FPS, which is more acceptable. The lack of min FPS data for most settings makes it difficult to assess frame time consistency, but the available data for Medium suggests that performance can vary.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS data, the optimal settings for the AMD Ryzen 7 3700X and Intel Arc B570 in Archeage depend on the user's resolution preference and performance expectations. At 1920x1080, the High preset provides an average of 66 FPS, which is above the 60 FPS threshold for smooth gameplay, making it the best choice for a balanced experience. The Ultra preset at 1080p offers 45 FPS, which is playable but not ideal for fast-paced action, while the Medium preset at 98 FPS is excessive for most players and may not offer a significant visual improvement over High. Therefore, at 1080p, High settings are recommended for the best combination of visual quality and performance.

At 2560x1440, the High preset provides an average of 45 FPS, which is below the 60 FPS target but still playable for an MMORPG. The Medium preset offers 66 FPS, which is smoother and may be preferable for players who prioritize frame rate over visual fidelity. Given that the drop from Medium to High is 21 FPS, and the visual difference may not be substantial, the Medium preset is the recommended choice at 1440p for a more fluid experience. The Low preset at 74 FPS is also viable, but it sacrifices significant visual quality.

At 3840x2160, the system struggles, with the High preset only achieving 26 FPS, which is not playable for most users. The Low preset at 42 FPS is borderline, but it requires a significant visual compromise. The Medium preset at 38 FPS is also low, and the Ultra preset at 17 FPS is unplayable. Therefore, for 4K gaming, it is not recommended to use this combo, as the frame rates are too low for a satisfactory experience. If a user must play at 4K, the Low preset is the only option, but it will not provide a smooth experience. The data clearly shows that this system is best suited for 1080p High or 1440p Medium settings, where it can deliver playable frame rates without excessive visual sacrifices.