Archeage

How This Combo Ranks

The AMD Ryzen 7 3700X paired with the NVIDIA GeForce RTX 3080 lands at rank 589 out of 1727 tested combos for Archeage. This places the combo in the upper third of all tested configurations, a strong result for a 2014 MMORPG that is now a decade old. The ranking reflects a system that is far more capable than the game's minimum requirements, but the data shows that the RTX 3080 is not being fully utilized in several scenarios.

The combo's position in the overall ranking is driven by the GPU's raw compute strength. The RTX 3080 sits at the 80th percentile among all GPUs in the database, with an average benchmark score of 35787. The CPU, while not in the same tier, holds the 85th percentile among all CPUs with an average benchmark score of 28631. When the two are combined in Archeage, the system delivers playable framerates across most settings, but the bottlenecks become apparent at higher resolutions and quality presets.

GPU Role

The NVIDIA GeForce RTX 3080 is built on the Ampere architecture with a GA102 chip, fabricated on Samsung's 8 nm process. It carries 28,300 million transistors on a 628 mm² die. The card features 10 GB of GDDR6X memory on a 320-bit bus, delivering 760.3 GB/s of memory bandwidth. This is a crucial specification for Archeage, an MMORPG that can have large open-world areas with many players, though the game's 2014 release date means it was designed around far less powerful hardware.

The GPU's base clock is 1440 MHz, with a boost clock of 1710 MHz, and memory running at 1188 MHz (19 Gbps effective). The card has 8704 shading units, 272 TMUs, and 96 ROPs, along with 68 RT cores and 272 tensor cores. Its pixel rate is 164.2 GPixel/s and texture rate is 465.1 GTexel/s, with FP32 performance at 29.77 TFLOPS.

In Archeage, the GPU's role is dominant at 1080p and 1440p, where the CPU can keep up with the card's output. However, at 4K with Ultra settings, the measured average FPS of 30.8 suggests the GPU is being pushed to its limits. The 10 GB frame buffer is adequate for this game at all tested resolutions, as the data shows playable framerates at High settings even at 4K.

Resolution Scaling

The measured FPS data reveals a clear pattern of scaling across the three tested resolutions. At 1080p, the combo achieves 176.6 FPS on Low settings, which drops to 138.1 FPS at 1440p and then 77.9 FPS at 4K. This represents a 56% drop from 1080p to 4K on Low settings. The scaling is even more pronounced on Ultra settings: 80.5 FPS at 1080p, 55.6 FPS at 1440p, and 30.8 FPS at 4K — a 62% reduction from 1080p to 4K.

The resolution scaling indicates that the RTX 3080 becomes the limiting component as resolution increases. At 1080p, the CPU's 8 cores and 16 threads can feed the GPU adequately, but the GPU's workload grows disproportionately at higher resolutions. The 4K Ultra result of 30.8 FPS is below the 60 FPS threshold typically considered smooth, and the data suggests that this combo is best suited for 1080p or 1440p gaming in Archeage.

Measured FPS Breakdown

1080p: The combo delivers its strongest results at this resolution. Low settings produce 176.6 FPS, Medium yields 170.8 FPS, and High reaches 122 FPS. Ultra drops to 80.5 FPS. The gap between Low and Medium is small (5.8 FPS), suggesting the GPU is not the primary constraint at these lower presets. The jump from High to Ultra (41.5 FPS difference) indicates a significant load increase from the Ultra preset.

1440p: At 1440p, Low settings produce 138.1 FPS, Medium reaches 121.6 FPS, and High hits 80.3 FPS. Ultra falls to 55.6 FPS. The scaling from 1080p to 1440p is consistent across presets, with about a 22-27% reduction in framerate. The 1440p Ultra result of 55.6 FPS is just below the 60 FPS mark, making it borderline for smooth gameplay.

4K: The 4K results show the GPU's limits. Low settings achieve 77.9 FPS, Medium drops to 70.1 FPS, and High falls to 47.8 FPS. Ultra is nearly unplayable at 30.8 FPS. The 4K High result of 47.8 FPS is below the 60 FPS threshold, and even Medium at 70.1 FPS is the only preset that clears 60 FPS comfortably at this resolution.

Settings Recommendations

The measured data points to 1440p High as the best balance of visual quality and performance. At 1440p High, the combo delivers 80.3 FPS, which is well above the 60 FPS threshold and only 10 FPS lower than the 1080p High result of 122 FPS. This preset provides a significant visual upgrade over 1080p while maintaining smooth framerates.

For players prioritizing maximum smoothness, 1080p Medium at 170.8 FPS offers nearly double the framerate of 1440p High while still providing decent visual fidelity. The 1080p Low result of 176.6 FPS is only marginally higher than Medium, so the Medium preset is the better choice at 1080p.

At 4K, the data suggests Medium settings (70.1 FPS) as the only viable option for consistent 60+ FPS gameplay. The 4K High result of 47.8 FPS is below the smooth threshold, and 4K Ultra at 30.8 FPS is not recommended. The 4K Medium preset offers a 38% improvement over 4K High while maintaining acceptable visual quality.

FAQ

Q: Can this combo run Archeage at 4K with playable framerates?

A: Yes, but only at Medium settings, which produce 70.1 FPS. High settings drop to 47.8 FPS, and Ultra falls to 30.8 FPS at 4K.

Q: What is the best resolution for this combo in Archeage?

A: The data shows 1440p High at 80.3 FPS as the best balance of quality and performance. 1080p Medium at 170.8 FPS is the smoothest option.

Q: How does the CPU affect gameplay in Archeage with this GPU?

A: The Ryzen 7 3700X has 8 cores and 16 threads with a boost clock of 4.40 GHz. The data shows it can keep up with the RTX 3080 at 1080p, but the GPU becomes the bottleneck at 4K.

Q: What is the GPU's VRAM capacity and how does it relate to Archeage?

A: The RTX 3080 has 10 GB of GDDR6X memory on a 320-bit bus. This is sufficient for all tested settings in Archeage, as the game does not appear to be VRAM-limited.

Q: How does the combo rank among all tested configurations?

A: The combo ranks 589 out of 1727 tested combos, placing it in the upper third of all configurations tested for Archeage.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: Low settings produce 138.1 FPS, while Ultra drops to 55.6 FPS. This represents a 60% reduction in framerate when moving from the lowest to the highest preset.

CPU Role

The AMD Ryzen 7 3700X is a Zen 2 architecture processor codenamed Matisse, manufactured on TSMC's 7 nm process. It has 8 cores and 16 threads with a base clock of 3.60 GHz and a boost clock of 4.40 GHz. The CPU's L3 cache is 32 MB, with 512 KB of L2 cache per core and 64 KB of L1 cache per core. Its 65 W TDP is relatively modest for an 8-core part, and it supports DDR4 memory in a dual-channel configuration with 51.2 GB/s of bandwidth.

In Archeage, the CPU's role is most evident at 1080p, where the GPU is not fully utilized. The 1080p Low result of 176.6 FPS and Medium result of 170.8 FPS show that the CPU can handle the game's logic at high framerates. The CPU's benchmark scores support this: its Cinebench R23 multicore score of 19087 and single-core score of 2694 indicate strong multithreaded and single-threaded performance.

However, the data also shows the CPU's limitations. At 4K, the GPU becomes the bottleneck, and the CPU's performance is less relevant. The CPU sits at the 85th percentile among all CPUs, slightly ahead of the Intel Core i5-12600 (deltaPct -0.1) and behind the AMD EPYC 7203P (deltaPct 0.2). This places it in a competitive position for a 2019 processor, though newer parts like the Intel Core i5-12600H match its average benchmark score almost exactly.

The combo's overall ranking of 589 out of 1727 is respectable, but the data suggests that the CPU is not the limiting factor in most scenarios. The RTX 3080's 80th percentile ranking among GPUs and the CPU's 85th percentile ranking indicate a well-balanced pairing for this game, with the GPU taking on more responsibility as resolution and settings increase.