Archeage

The AMD Ryzen 5 7500F and AMD Radeon RX 6700 XT combination delivers a playable but resolution-sensitive experience in Archeage. The measured data shows a clear progression: at 1080p, the system is capable of high refresh rates, but 4K Ultra becomes a slideshow. This pairing is best suited for 1080p and 1440p gaming, where it can leverage both the CPU's strong single-thread performance and the GPU's ample memory bandwidth.

Resolution Scaling

The frame rate drop from 1080p to 4K is dramatic and reveals the GPU as the primary bottleneck at higher resolutions. At High settings, the average FPS falls from 95.4 at 1920x1080 to 64.4 at 2560x1440, a reduction of 31.0 FPS. Pushing further to 3840x2160, the average drops to 37.7 FPS, which is less than half of the 1080p result. This steep decline indicates that the RX 6700 XT is being overwhelmed by the pixel count at 4K.

The scaling pattern is consistent across all settings. At Low settings, the system achieves 153.4 FPS at 1080p, 106.3 FPS at 1440p, and 57.3 FPS at 4K. The 4K result is 37.4% of the 1080p score. For Medium settings, the progression is 137.2 FPS to 93.8 FPS to 53.9 FPS. The relative drop from 1080p to 4K is similar across these presets, confirming that resolution, not the specific preset, is the dominant factor limiting performance.

The most extreme case is Ultra settings, where 4K performance collapses to 26.2 FPS. This is unplayable by any standard. The data suggests that the RX 6700 XT's 12 GB of VRAM and 384.0 GB/s bandwidth are sufficient for 1080p and 1440p, but the sheer pixel throughput required at 4K exceeds what the GPU can handle in this title. The CPU, with its 6 cores and 12 threads on the Zen 4 architecture, does not appear to be the limiting factor at higher resolutions, as the FPS drops correlate directly with the increased GPU load.

GPU Role

The AMD Radeon RX 6700 XT is the defining component in this system's gaming performance. Its specifications include 12 GB of GDDR6 memory on a 192-bit bus, providing 384.0 GB/s of bandwidth. The GPU has a base clock of 2321 MHz and a boost clock of 2581 MHz, with a game clock of 2424 MHz. These clocks are relatively high, but the architecture's 2560 shading units and 64 ROPs are tasked with rendering the frame.

In Archeage, the GPU's role is clear from the benchmark data. At 1080p Low, the system hits 153.4 FPS, showing the GPU can handle light loads with ease. However, at 4K Ultra, the average FPS plummets to 26.2, indicating the GPU is completely saturated. The performance delta between Low and Ultra at the same resolution is significant: at 1080p, the difference is 92.1 FPS (153.4 vs 61.3), while at 4K, it is 31.1 FPS (57.3 vs 26.2). This suggests that the GPU's compute resources are exhausted by the higher fidelity settings, particularly at higher resolutions.

The GPU's benchmark percentile of 77 places it above most graphics cards, but its nearest rivals show it is not a top-tier performer. It sits 0.7% behind the AMD Radeon RX 6800 and 1.3% ahead of the NVIDIA RTX A5000. This positions the RX 6700 XT as a solid mid-range option. For Archeage, the data implies that the 12 GB VRAM is not the constraint at 1080p or 1440p, but the raw compute power is insufficient for smooth 4K gameplay. The memory clock of 2000 MHz (16 Gbps effective) helps maintain bandwidth, but it cannot compensate for the rendering load at 4K Ultra.

Settings Recommendations

The measured rows point to Medium as the optimal preset for this system. At 1080p, Medium delivers 137.2 FPS, which is only 16.2 FPS less than Low but significantly smoother than High's 95.4 FPS. The jump from Medium to High costs 41.8 FPS at 1080p, a steep price for visual fidelity. At 1440p, Medium produces 93.8 FPS, which is comfortably playable, while High drops to 64.4 FPS. This makes Medium the best balance of image quality and performance.

For 4K, no setting is truly ideal. Medium yields 53.9 FPS, which is borderline playable, but High drops to 37.7 FPS and Ultra falls to 26.2 FPS. If 4K is a priority, the data suggests using Medium and accepting a lower frame rate. However, the system is clearly not designed for 4K gaming in this title, as even the best 4K result (Low at 57.3 FPS) is below the 60 FPS threshold.

The data shows that Ultra settings are not worth the performance cost. At 1440p, Ultra achieves 44.8 FPS, which is less than half of Medium's 93.8 FPS. At 1080p, Ultra manages 61.3 FPS, but this is 75.9 FPS slower than Medium. For a game like Archeage, where fast-paced combat benefits from higher frame rates, the visual upgrade from Ultra does not justify the massive FPS hit. Medium is the recommended preset for players who prioritize smooth gameplay, while High can be used at 1080p if a 95 FPS average is acceptable.

FAQ

Q: What is the best resolution for this CPU/GPU combo in Archeage?

A: The data shows 1920x1080 is the best resolution, with an average of 153.4 FPS on Low settings and 137.2 FPS on Medium. At 2560x1440, the best result is 106.3 FPS on Low, which is still playable, but 4K performance is poor across all settings.

Q: How much performance is lost when moving from 1080p to 1440p?

A: On High settings, the average FPS drops from 95.4 at 1080p to 64.4 at 1440p, a loss of 31.0 FPS. On Medium settings, the drop is from 137.2 to 93.8, a loss of 43.4 FPS.

Q: Is the RX 6700 XT's 12 GB of VRAM sufficient for Archeage?

A: The benchmark results do not indicate a VRAM limitation. The GPU's 12 GB memory and 384.0 GB/s bandwidth are adequate for the tested settings, as the performance drops are consistent with compute load rather than memory capacity issues.

Q: Can this system handle 4K gaming?

A: Not effectively. The highest 4K average is 57.3 FPS on Low settings. On Medium, it drops to 53.9 FPS, and on High it falls to 37.7 FPS. Ultra is unplayable at 26.2 FPS.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The Ryzen 5 7500F has an average benchmark score of 24993, which is 0.1% higher than the Intel Core i7-11850H and 0.4% higher than the AMD Ryzen 9 6900HX. It is 0.3% lower than both the AMD Ryzen 7 2700X and the AMD Ryzen 5 8400F.

Q: What is the FPS difference between Low and Ultra settings at 1080p?

A: The difference is 92.1 FPS. Low settings average 153.4 FPS, while Ultra averages 61.3 FPS. This shows the significant performance cost of the highest preset.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, running on the AMD Socket AM5. It has a base clock of 3.70 GHz and a boost clock of 5.00 GHz, with a 65 W TDP. The CPU's cache configuration includes 64 KB of L1 per core, 1 MB of L2 per core, and a shared 32 MB of L3. The data shows this is a capable processor, with a passmark single-thread score of 3841 and a Cinebench R23 single-core score of 3218.

In Archeage, the CPU's role is less prominent than the GPU's, but still important. At 1080p Low, the system achieves 153.4 FPS, which suggests the CPU can feed the GPU adequately. However, the CPU's multi-threaded performance, as shown by a Cinebench R23 multicore score of 22799, is not the limiting factor in this game. The FPS differences between resolutions and settings are more closely tied to GPU load.

The CPU's percentile of 82 places it above the vast majority of CPUs. Its nearest rival, the Intel Core i7-11850H, scores 24974, only 0.1% lower. This indicates the 7500F is a strong performer for gaming. With 12 threads, it can handle the background tasks and game logic of an MMORPG like Archeage, but the benchmark data shows that the GPU is what determines the final frame rate, especially at higher resolutions. The CPU's 5.00 GHz boost clock helps maintain high FPS in less demanding scenes, but the overall performance is capped by the GPU's rendering capabilities.

Measured FPS Breakdown

The complete set of measured FPS data for Archeage is as follows:

1920x1080:

• Low: 153.4 FPS average
• Medium: 137.2 FPS average
• High: 95.4 FPS average
• Ultra: 61.3 FPS average

2560x1440:

• Low: 106.3 FPS average
• Medium: 93.8 FPS average
• High: 64.4 FPS average
• Ultra: 44.8 FPS average

3840x2160:

• Low: 57.3 FPS average
• Medium: 53.9 FPS average
• High: 37.7 FPS average
• Ultra: 26.2 FPS average

At 1080p, the system is capable of high refresh rates on Low and Medium, with Low delivering 153.4 FPS and Medium at 137.2 FPS. High is still playable at 95.4 FPS, but Ultra drops to 61.3 FPS. The transition to 1440p shows a clear step down: Low is 106.3 FPS, Medium is 93.8 FPS, High is 64.4 FPS, and Ultra is 44.8 FPS. At 4K, all settings fall below 60 FPS, with Low being the only option above 50 FPS at 57.3 FPS. Ultra at 4K is the worst-case scenario at 26.2 FPS, making it unsuitable for gameplay. This breakdown confirms that the system is optimized for 1080p and acceptable for 1440p, but it lacks the GPU horsepower for 4K.