Archeage
This combination offers playable performance with an average of 59 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 18 | 25 | 41 | 47 |
| 1440p QHD | 32 | 47 | 74 | 77 |
| 1080p Full HD | 50 | 71 | 106 | 121 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 5 5600X + AMD Radeon RX 6600, In-Depth Analysis
The AMD Ryzen 5 5600X and AMD Radeon RX 6600 combination delivers a playable but not flawless experience in Archeage, with performance heavily dependent on resolution and the game’s demanding Ultra preset. The data shows a clear hierarchy where the GPU becomes the primary limiting factor at higher resolutions, while the CPU’s strong single-threaded capabilities shine at 1080p. This analysis breaks down the measured FPS across all settings and resolutions, contextualizes the results against other tested combos, and provides guidance on the best settings for this specific pairing.
Resolution Scaling
The measured FPS data reveals a steep performance cliff as resolution increases, particularly when moving from 1920x1080 to 3840x2160. At 1080p with Low settings, the combo achieves 120.8 FPS, but this drops to 77.2 FPS at 1440p and further to 47.4 FPS at 4K. This represents a 61% reduction in performance from 1080p to 4K at Low settings, indicating that the RX 6600’s 8 GB memory bus and 128-bit interface are heavily taxed by the pixel count at 4K.
The scaling pattern becomes more pronounced at higher settings. With High settings, the FPS drops from 70.9 at 1080p to 46.5 at 1440p (a 34% decline) and then to 25.2 at 4K (a further 46% decline). The Ultra preset is the most demanding scenario, where the frame rate collapses from 49.7 at 1080p to 32.2 at 1440p and finally to 17.8 at 4K. This suggests that at 4K Ultra, the GPU is completely overwhelmed, rendering the game nearly unplayable.
The data clearly indicates that the Radeon RX 6600 is the dominant bottleneck at 1440p and 4K. The transition from 1080p to 1440p at Medium settings sees a drop from 106.4 to 74 FPS, which is a 30% reduction, while the jump from 1440p to 4K at the same settings halves the frame rate to 41.3. This non-linear scaling is characteristic of a GPU hitting its memory bandwidth limit, as the 224.0 GB/s bandwidth cannot sustain the data throughput required at higher resolutions. At 1080p, the scaling between Low and Medium is more moderate (from 120.8 to 106.4 FPS), suggesting the CPU still has headroom to feed the GPU, but by 1440p the GPU saturates earlier.
GPU Role
The AMD Radeon RX 6600’s specifications directly correlate with its performance in Archeage. The GPU features 8 GB of GDDR6 memory on a 128-bit bus, yielding a bandwidth of 224.0 GB/s. This is a modest configuration for a modern game, and the measured FPS reflects this limitation. The boost clock of 2491 MHz and game clock of 2044 MHz are respectable, but the fundamental constraint is the memory subsystem.
At 1080p, the GPU’s raw compute power, rated at 8.928 TFLOPS FP32, is sufficient to maintain high frame rates. The Low preset at 1080p achieves 120.8 FPS, which is near the practical ceiling for many displays. However, the Ultra preset at 1080p drops to 49.7 FPS, a 59% reduction from Low, showing that the game’s Ultra settings introduce significant shading and texture complexity that taxes the 1792 shading units and 112 texture mapping units.
The GPU’s performance percentile of 69 relative to all GPUs places it in the upper-midrange, and its benchmark scores corroborate this positioning. The Passmark G3D score of 15096 and 3DMark Steel Nomad DX12 score of 1492 indicate a card that can handle esports and older titles well but struggles with more demanding modern games at high resolutions. In Archeage, the 4K results are particularly telling: even at Low settings, the average FPS is only 47.4, which is marginal for a smooth experience. The GPU’s 64 ROPs and 28 ray tracing cores are underutilized in this title, but the memory bandwidth remains the bottleneck, as evidenced by the steep FPS drops at 4K.
How This Combo Ranks
The Ryzen 5 5600X and RX 6600 combination ranks 1388 out of 1727 tested combos in Archeage, placing it in the lower-midrange of the database. This ranking is below what the individual component percentiles might suggest, indicating that this game is particularly demanding on the GPU configuration. The CPU’s percentile of 78 and the GPU’s percentile of 69 do not translate to a high combo rank because Archeage’s performance is heavily GPU-bound at settings above Low.
The nearest rival comparisons for the CPU show that the Ryzen 5 5600X is closely matched with other midrange processors. It trails the AMD Ryzen 5 5600GT by 0.3%, the Intel Core i7-10700 by 0.3%, and the Intel Core i5-12490F by 0.5%, while leading the Intel Xeon 6325P by 0.7%. These small deltas mean the CPU is not a differentiator in this combo’s ranking—the GPU is. For the GPU, the RX 6600 is virtually tied with the AMD Radeon 890M (0% delta), trails the AMD Radeon RX 580 2048SP by 0.2%, and leads the AMD Radeon RX 6700M by 0.2% and the NVIDIA GeForce RTX 3060 Ti by 0.5%. This tight clustering reinforces that the RX 6600 is a solid midrange card but not exceptional, and its 8 GB memory capacity is a limiting factor in a game like Archeage at higher resolutions.
The rank of 1388 out of 1727 means that roughly 80% of tested combos perform better in this game. This is a sobering statistic for a pairing that is otherwise well-matched for many titles. The data suggests that if the goal is high FPS in Archeage, particularly at 4K, this combo falls short of the mark, and users with higher refresh rate monitors may need to stick to 1080p or accept lower settings at 1440p.
Measured FPS Breakdown
The measured FPS data provides a complete picture across three resolutions and four settings presets. At 1920x1080, the results are as follows: Low averages 120.8 FPS, Medium averages 106.4 FPS, High averages 70.9 FPS, and Ultra averages 49.7 FPS. The gap between Medium and High is substantial (33% drop), while the jump from High to Ultra is a further 30% decline. This indicates that the High preset introduces a significant load increase, possibly through more detailed shadows and post-processing effects.
At 2560x1440, the FPS drops across the board: Low averages 77.2 FPS, Medium averages 74 FPS, High averages 46.5 FPS, and Ultra averages 32.2 FPS. The difference between Low and Medium at this resolution is minimal (only 4%), suggesting that the GPU is already becoming the bottleneck even at Low settings. The High preset takes a 37% hit compared to Medium, and Ultra drops another 31%. The 1440p results are playable at Low and Medium, but High and Ultra fall below the 60 FPS threshold for smooth gameplay.
At 3840x2160, the performance is severely constrained: Low averages 47.4 FPS, Medium averages 41.3 FPS, High averages 25.2 FPS, and Ultra averages 17.8 FPS. Even the Low preset at 4K struggles to maintain a consistent 60 FPS, and the Ultra preset is essentially a slideshow. The scaling from 1080p to 4K at each setting shows a consistent pattern: Low drops from 120.8 to 47.4 (61% reduction), Medium from 106.4 to 41.3 (61% reduction), High from 70.9 to 25.2 (64% reduction), and Ultra from 49.7 to 17.8 (64% reduction). This uniformity suggests that the RX 6600’s memory bandwidth is the hard limit, and no amount of setting tweaking can overcome the pixel count at 4K.
Settings Recommendations
Based on the measured rows, the optimal experience for this combo depends on the target resolution. At 1920x1080, the Low preset delivers 120.8 FPS, which is excellent for competitive play or high refresh rate displays. However, the Medium preset at 106.4 FPS offers a better visual quality-to-performance ratio, providing a 12% drop in FPS but likely a significant visual improvement. The High preset at 70.9 FPS is still playable and offers the best visual fidelity for a smooth experience, while Ultra at 49.7 FPS is borderline and may cause noticeable stuttering in crowded areas typical of an MMORPG.
For 2560x1440, the Medium preset at 74 FPS is the sweet spot. It maintains a frame rate above the 60 FPS threshold while providing decent visual quality. The Low preset at 77.2 FPS is only marginally faster and may look noticeably worse, so Medium is the recommended choice. The High preset at 46.5 FPS is playable but not ideal for a genre where quick reactions matter, and Ultra at 32.2 FPS should be avoided.
At 3840x2160, the data shows that no preset delivers a truly smooth experience. The Low preset at 47.4 FPS is the only option that approaches playability, but it still falls short of 60 FPS. For 4K gaming, this combo is not recommended, and users should consider lowering the resolution to 1440p to achieve a better balance. The Ultra preset at 17.8 FPS is unusable, and even High at 25.2 FPS is too choppy for practical play. The recommendation is to stick to 1080p Medium or 1440p Medium for the best experience, as these settings provide the highest FPS while maintaining acceptable visual quality.
CPU Role
The AMD Ryzen 5 5600X is a 6-core, 12-thread processor based on the Zen 3 architecture, running at a base clock of 3.70 GHz and a boost clock of 4.60 GHz. Its single-threaded performance is exceptional, as evidenced by a Geekbench single-core score of 2111 and a Cinebench R23 single-core score of 2622. This strong single-thread capability is critical for MMORPGs like Archeage, which often rely on a few fast threads for game logic and physics.
In this combo, the CPU’s role becomes more apparent at lower resolutions. At 1080p Low, the 120.8 FPS result suggests that the Ryzen 5 5600X can feed the GPU efficiently, and the CPU is not a bottleneck. However, the 3DMark single-thread score of 917 and 2-thread score of 1793 show that the processor excels at the kind of lightly-threaded workloads that MMORPGs present. The CPU’s 32 MB L3 cache is also beneficial for game data that is frequently accessed.
The CPU’s benchmark performance places it in the 78th percentile of all CPUs, with an average score of 20680. It is closely matched with rival processors, trailing the Ryzen 5 5600GT and Core i7-10700 by 0.3% each, and the Core i5-12490F by 0.5%, while leading the Xeon 6325P by 0.7%. These small differences mean that swapping the CPU for a rival would have minimal impact on Archeage’s frame rates, as the GPU is the dominant factor in this game’s performance. The multi-threaded scores, such as Cinebench R20 multicore of 7802 and Passmark multithread of 21858, are solid but not the primary driver of FPS in this title. The data confirms that the Ryzen 5 5600X is a capable gaming CPU, but in Archeage, its performance is sufficient to avoid limiting the RX 6600 at 1080p, while at higher resolutions, the GPU’s limitations take precedence.
Hardware Specifications
AMD Ryzen 5 5600X
AMD Radeon RX 6600
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600X + AMD Radeon RX 6600 in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 47.4 |
| 3840x2160 | Medium | 41.3 |
| 3840x2160 | High | 25.2 |
| 3840x2160 | Ultra | 17.8 |
| 2560x1440 | Low | 77.2 |
| 2560x1440 | Medium | 74.0 |
| 2560x1440 | High | 46.5 |
| 2560x1440 | Ultra | 32.2 |
| 1920x1080 | Low | 120.8 |
| 1920x1080 | Medium | 106.4 |
| 1920x1080 | High | 70.9 |
| 1920x1080 | Ultra | 49.7 |
Archeage with Ryzen 5 5600X + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RX 6600 + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 5 5600X + RX 6600
Explore FPS benchmarks for other games using this same hardware combination.