Archeage

Resolution Scaling

ArcheAge’s frame rate behavior across resolutions reveals a system that transitions from CPU-bound at 1080p to heavily GPU-bound at 4K. At 1920x1080 with High settings, the AMD Ryzen 5 5600 and NVIDIA GeForce RTX 2060 combination produces 73.7 FPS. Dropping to Low settings at the same resolution yields 116.9 FPS, while Medium settings hit 105.1 FPS. The jump from Low to High represents a 36.9% performance reduction, suggesting that the graphics pipeline becomes a limiting factor even at 1080p when settings increase.

Moving to 2560x1440, the scaling pattern intensifies. High settings deliver 48.3 FPS, a 34.5% drop from the 1080p High result. Low settings at 1440p achieve 80 FPS, while Medium settings produce 70.7 FPS. The gap between Low and High at 1440p is 31.7 FPS, which is proportionally larger than at 1080p (43.2 FPS difference). This widening delta indicates that the RTX 2060’s rendering capabilities start to dominate as pixel count rises.

At 3840x2160, the GPU becomes the unambiguous bottleneck. High settings yield just 26.3 FPS, and Ultra settings plummet to 18.2 FPS—barely playable territory. Even Low settings at 4K only reach 43.9 FPS, which is 62.4% lower than the 1080p Low result. The scaling from 1440p High (48.3 FPS) to 4K High (26.3 FPS) shows a 45.5% reduction, consistent with the 2.25x pixel increase between those resolutions. The RTX 2060’s 6 GB GDDR6 memory and 336.0 GB/s bandwidth are clearly insufficient for smooth 4K operation in ArcheAge, as the data shows no configuration at 2160p exceeding 44 FPS.

CPU Role

The Ryzen 5 5600 brings six cores and twelve threads to the pairing, with a base clock of 3.50 GHz and a boost clock of 4.40 GHz. This Zen 3 architecture processor, built on TSMC’s 7 nm process, demonstrates strong multi-threaded capability in synthetic benchmarks: Cinebench R23 multicore scores 18,309 points, while single-core reaches 2,584 points. These figures place the CPU in the 79th percentile among all tested processors, indicating solid headroom for MMORPG workloads.

In ArcheAge, the CPU’s influence is most apparent at lower resolutions where the GPU is less stressed. At 1080p Low, the system achieves 116.9 FPS, which is 2.3x higher than the 4K Low result (43.9 FPS). This disparity suggests that at 1080p, the Ryzen 5 5600 can feed frames faster than the RTX 2060 can render them, but the gap closes dramatically as resolution increases. The 3DMark scores reinforce this: 5,641 points for 16 threads and 5,659 for max threads indicate that the processor’s multi-core scaling is nearly saturated, with only a 0.3% improvement from 16 threads to maximum thread count.

The CPU’s 32 MB of shared L3 cache and dual-channel DDR4 memory support (with 51.2 GB/s bandwidth) provide adequate data throughput for ArcheAge’s large world and many concurrent entities. However, the benchmark data shows that at Ultra settings, the frame rate collapses to 50.7 FPS at 1080p, 30.6 FPS at 1440p, and 18.2 FPS at 4K. This steep decline with quality settings indicates that while the CPU is capable of high frame rates in light loads, the overall system performance is constrained by the GPU once visual fidelity increases. The Ryzen 5 5600’s 65 W TDP and unlocked multiplier suggest it has headroom for overclocking, but the measured results show that such efforts would yield diminishing returns given the GPU bottleneck at higher settings.

GPU Role

The RTX 2060, built on the Turing architecture with the TU106 chip, operates with a base clock of 1365 MHz and a boost clock of 1680 MHz. Its 6 GB of GDDR6 memory on a 192-bit bus provides 336.0 GB/s of bandwidth, which is a critical limitation at 4K resolutions. The GPU’s 1,920 shading units, 120 texture mapping units, and 48 ROPs deliver a pixel rate of 80.64 GPixel/s and a texture rate of 201.6 GTexel/s. These specifications translate to 6.451 TFLOPS of FP32 performance, placing the card in the 58th percentile among all GPUs.

The benchmark data in ArcheAge clearly demonstrates the GPU’s role as the primary performance limiter. At 1080p, the RTX 2060 manages 73.7 FPS on High settings, but this drops to 48.3 FPS at 1440p and 26.3 FPS at 4K—a 64.3% reduction from 1080p to 4K. The GPU’s memory subsystem becomes particularly stressed at higher resolutions; the 6 GB frame buffer is likely insufficient for Ultra settings at 1440p and above, as evidenced by the 30.6 FPS result at 1440p Ultra versus 70.7 FPS at Medium. This 56.7% performance penalty from Medium to Ultra suggests texture and geometry data exceed the available VRAM, forcing the GPU to rely on slower memory transfers.

The RTX 2060’s ray tracing cores (30) and tensor cores (240) provide features that ArcheAge, a 2014 MMORPG, does not appear to leverage significantly, as the game’s DirectX 12 benchmarks show only 53 points in Passmark’s DX12 test. The GPU’s 160 W TDP and suggested 450 W PSU indicate modest power requirements, but the performance data shows that this card is best suited for 1080p gaming in ArcheAge. At 4K High settings, the 26.3 FPS result falls below the threshold for smooth gameplay, and even Low settings at 4K (43.9 FPS) are borderline. The GPU’s nearest rival, the AMD Radeon RX 7600S, has an average score of 15,996 with a delta of 0.5%, indicating the RTX 2060 is competitively positioned among its peers, yet the ArcheAge results show its practical limits in demanding resolutions.

How This Combo Ranks

The AMD Ryzen 5 5600 + NVIDIA GeForce RTX 2060 combination ranks 1,410 out of 1,727 tested combos in ArcheAge, placing it in the bottom 18.3% of all configurations. This relatively low ranking is notable given that the individual components perform reasonably well in isolation: the CPU sits in the 79th percentile, and the GPU in the 58th percentile. The discrepancy suggests that ArcheAge is particularly demanding on the GPU, and the RTX 2060’s 6 GB memory capacity and 192-bit bus width create a bottleneck that limits the overall combo’s effectiveness.

The CPU’s nearest rivals include the Intel Xeon D-1746TER (average score 21,635, delta 0.6%), AMD EPYC 9554P (21,899, delta -0.6%), and Intel Core i7-11700F (21,957, delta -0.9%). These deltas are all within 1% of the Ryzen 5 5600’s average benchmark score of 21,765, indicating that the CPU is well-matched to its peers. However, the GPU comparison tells a similar story: the AMD Radeon RX 7600S (15,996, delta 0.5%), AMD Radeon Pro 5600M (16,351, delta -1.7%), and AMD Radeon Pro 5700 (16,351, delta -1.7%) are all within 2% of the RTX 2060’s average score of 16,074.

Despite the components being competitively positioned individually, the combo’s rank in ArcheAge reveals that the pairing struggles with this specific workload. The measured FPS data shows that at 1080p High, the system achieves 73.7 FPS, which is playable but not exceptional. At 1440p, the performance drops to 48.3 FPS, and 4K is largely untenable. The 1,410th rank out of 1,727 combos suggests that many other CPU-GPU pairings deliver better ArcheAge performance, likely due to the RTX 2060’s limitations at higher resolutions. The data indicates that this combo is adequate for 1080p gaming but falls short for users targeting higher resolutions or maximum settings in ArcheAge.

FAQ

Q: What is the best resolution and settings for this combo in ArcheAge?

A: The data shows 1080p Medium settings achieve 105.1 FPS, while 1080p High reaches 73.7 FPS. For smoother gameplay, 1080p is the recommended resolution, as 1440p High drops to 48.3 FPS and 4K High falls to 26.3 FPS.

Q: How does the Ryzen 5 5600 compare to its nearest CPU rivals?

A: The Ryzen 5 5600 has an average benchmark score of 21,765, which is 0.6% higher than the Intel Xeon D-1746TER (21,635) and 0.6% lower than the AMD EPYC 9554P (21,899). The Intel Core i7-11700F scores 21,957, which is 0.9% higher.

Q: Is the RTX 2060's 6 GB VRAM sufficient for ArcheAge at 4K?

A: No. At 4K Ultra settings, the combo achieves only 18.2 FPS, and even 4K Low settings reach just 43.9 FPS. The 6 GB memory capacity appears insufficient for higher settings, as evidenced by the steep drop from Medium (39.4 FPS) to Ultra (18.2 FPS) at 4K.

Q: What is the GPU's performance percentile and how does it rank among rivals?

A: The RTX 2060 is in the 58th percentile among all GPUs, with an average benchmark score of 16,074. Its nearest rival, the AMD Radeon RX 7600S, scores 15,996 (0.5% lower), while the AMD Radeon Pro 5700 scores 16,351 (1.7% higher).

Q: How does the combo's ArcheAge rank compare to its individual component rankings?

A: The combo ranks 1,410 out of 1,727 tested combos (bottom 18.3%), despite the CPU being in the 79th percentile and the GPU in the 58th percentile. This gap suggests the GPU is the limiting factor in ArcheAge specifically.

Q: What are the CPU's key specifications that affect ArcheAge performance?

A: The Ryzen 5 5600 has 6 cores and 12 threads, with a base clock of 3.50 GHz and boost clock of 4.40 GHz. It features 32 MB of shared L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth, which provides adequate throughput for MMORPG workloads.