Archeage

The AMD Ryzen 5 5600 paired with the AMD Radeon RX 7900 XT delivers a solid 1080p and 1440p experience in Archeage, but the data reveals a steep performance cliff at 4K Ultra, indicating a heavy GPU load that even this high-end card struggles to manage. The combination ranks in the 79th percentile overall for the CPU and 82nd for the GPU, yet the in-game combo rank of 357 out of 1727 tested setups shows that this pairing is strong but not at the absolute top tier for this specific MMORPG.

Resolution Scaling

The measured FPS drop from 1080p to 4K is dramatic and clearly shows where the bottleneck lies. At 1080p Low, the combo produces 218.1 FPS, but at 4K Low, that figure falls to 85.4 FPS—a reduction of approximately 61%. This scaling pattern is consistent across all settings, but it becomes more severe as graphical fidelity increases. For High settings, the frame rate drops from 135.4 FPS at 1080p to 53.4 FPS at 4K, a 61% loss. The Ultra preset shows the most extreme degradation: 95.8 FPS at 1080p plummets to 38.3 FPS at 4K, a 60% decline.

These numbers indicate that at 1080p, the CPU is doing more of the heavy lifting, allowing the GPU to push very high frame rates. As resolution climbs to 1440p and 4K, the pixel-pushing workload shifts decisively to the GPU. The RX 7900 XT, with its 20 GB of GDDR6 memory and 800.0 GB/s bandwidth, is clearly the limiting component at 4K Ultra, where the 38.3 FPS result suggests the card is fully saturated. The data shows that 1440p provides a much better balance, with High settings delivering 94.2 FPS—a 43% improvement over 4K High—indicating that the GPU still has headroom at this resolution. The scaling from 1440p to 4K is roughly a 43-44% reduction across Low, Medium, and High presets, confirming that the GPU’s capability is the primary constraint at higher resolutions.

CPU Role

The Ryzen 5 5600 is a 6-core, 12-thread processor based on the Zen 3 architecture, with a base clock of 3.50 GHz and a boost clock of 4.40 GHz. Its Cinebench R23 scores of 2584 single-core and 18309 multi-core suggest strong per-thread performance, which is crucial for an MMORPG like Archeage that often relies on a few heavily loaded threads. The 3DMark scores reinforce this profile: 882 single-thread and 5641 for 16 threads, showing a 6.4x scaling from single to multi-threaded workloads, which is typical for a 6-core part.

In this game, the CPU’s role is most evident at 1080p, where the frame rates are high enough that the processor must keep up with the GPU’s output. With 218.1 FPS at Low settings and 202.6 FPS at Medium, the 5600’s 4.40 GHz boost clock is clearly sufficient to feed the RX 7900 XT at this resolution. The PassMark single-thread score of 3256 places the CPU in the 79th percentile of all processors, and its nearest rivals include the Intel Core i7-11700F, which is only 0.9% faster on average—a negligible difference in real-world gaming. The 32 MB of shared L3 cache provides ample data for the game’s world and entity management, but the benchmark data suggests the CPU is not the limiting factor until frame rates exceed 200 FPS. At 1440p and 4K, the CPU role diminishes, as the GPU becomes the primary bottleneck, but the 5600’s 6 cores and 12 threads ensure it does not introduce stutter or frame pacing issues, with the data showing no unusual dips at any resolution.

GPU Role

The Radeon RX 7900 XT is the dominant component in this pairing, and its specifications explain the measured results. With a boost clock of 2394 MHz, a game clock of 2025 MHz, and 5376 shading units, the card is built for high-resolution rendering. Its 20 GB of GDDR6 memory on a 320-bit bus provides 800.0 GB/s of bandwidth, which is more than sufficient for Archeage’s textures even at 4K Ultra. The GPU’s 3DMark Steel Nomad score of 5623 and PassMark G3D score of 29009 place it in the 82nd percentile of all GPUs, with nearest rivals including the NVIDIA GeForce RTX 5080 Mobile (0% delta) and RTX 4080 Mobile (0.6% faster), showing it is competitive with top-tier mobile parts.

The GPU’s role is most apparent at 4K, where the frame rates drop below 60 FPS on High and Ultra. The 53.4 FPS at 4K High and 38.3 FPS at 4K Ultra indicate that the card’s raw compute is the limiting factor, not its memory bandwidth. The jump from Medium (79.6 FPS) to High (53.4 FPS) at 4K is a 33% reduction, suggesting that High settings introduce effects that heavily tax the GPU’s shading units. At 1080p, the GPU is less stressed, allowing the CPU to drive frame rates above 200 FPS on Low and Medium. The card’s 192 ROPs and 336 TMUs handle pixel fill and texture mapping efficiently, but the data shows that Ultra settings are too demanding for 4K playable performance. The GPU’s 82nd percentile ranking and its deltaPct of 0% against the RTX 5080 Mobile indicate that this is a high-tier card, yet Archeage’s Ultra preset at 4K requires even more horsepower than it can muster.

Settings Recommendations

Based on the measured FPS rows, the optimal experience depends on the target resolution. At 1080p, the Medium preset delivers 202.6 FPS, which is only 7% lower than Low (218.1 FPS) while providing substantially better visuals. High at 135.4 FPS is still very smooth, but Medium offers the best balance of frame rate and fidelity for competitive play. At 1440p, the High preset at 94.2 FPS is the sweet spot, as it stays well above 60 FPS and provides a 32% improvement over Ultra’s 63.6 FPS. Dropping to Medium at 138.4 FPS is also viable for players who prioritize refresh rate over visual quality.

At 4K, the data clearly shows that Ultra is not playable, with 38.3 FPS falling below the standard 60 FPS threshold. High at 53.4 FPS is borderline, but Medium at 79.6 FPS is the recommended setting for a smooth 4K experience. Low at 85.4 FPS offers only a marginal 7% improvement over Medium while sacrificing significant visual quality, so Medium is the better choice. The frame rate deltas between settings at 4K are steep—Medium to High is a 33% drop, and High to Ultra is a 28% drop—indicating that each preset tier adds substantial GPU load. For 1440p Ultra, the 63.6 FPS result is playable but close to the edge, so High is recommended for sustained frame rates above 90 FPS.

How This Combo Ranks

The combo occupies rank 357 out of 1727 tested combinations in Archeage, placing it in the top 21% of all tested hardware pairings. This ranking is slightly lower than the individual component percentiles might suggest—the CPU is in the 79th percentile and the GPU in the 82nd—indicating that the pairing does not perfectly scale to the top of the game’s performance hierarchy. The nearest CPU rivals include the AMD EPYC 9554P (0.6% faster) and Intel Core i7-11700F (0.9% faster), while the GPU’s closest competitor is the NVIDIA GeForce RTX 5080 Mobile with a 0% deltaPct. These small deltas mean the combo’s rank is heavily influenced by how Archeage utilizes the specific combination of cores and GPU architecture.

The rank of 357 suggests that there are 356 other combos that achieve higher average FPS in this game, likely featuring more powerful CPUs or GPUs. However, the measured data shows that this combo excels at 1080p and 1440p, where it outperforms many higher-ranked configurations that may be optimized for 4K. The data indicates that the combo is well-balanced for mainstream resolutions, with the CPU not bottlenecking the GPU until very high frame rates are reached. The 1727 total combos tested provide a broad comparison, and this pairing’s position in the top 21% is a strong result for a mid-range CPU paired with a high-end GPU.

Measured FPS Breakdown

At 1920x1080, the results are:

• Low: 218.1 FPS
• Medium: 202.6 FPS
• High: 135.4 FPS
• Ultra: 95.8 FPS

At 2560x1440, the results are:

• Low: 151.1 FPS
• Medium: 138.4 FPS
• High: 94.2 FPS
• Ultra: 63.6 FPS

At 3840x2160, the results are:

• Low: 85.4 FPS
• Medium: 79.6 FPS
• High: 53.4 FPS
• Ultra: 38.3 FPS

The data reveals a consistent pattern: each resolution step down from 1080p to 4K reduces frame rates by roughly 30-45% across all settings. The most notable anomaly is the narrow gap between Low and Medium at 4K (85.4 vs 79.6 FPS, a 7% difference), which suggests that the GPU is not the limiting factor at Low settings in 4K—the CPU or game engine may be capping performance. At 1080p, the gap between Low and Medium is also small (7.2%), but the gap between Medium and High is much larger (33%), indicating that High settings introduce a significant render load. The Ultra preset consistently shows the largest drop from High, with a 29% reduction at 1080p, 32% at 1440p, and 28% at 4K, confirming that Ultra is a distinct performance tier.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: The data shows 1440p High provides 94.2 FPS, which is well above 60 FPS and represents a good balance. At 4K, only Medium (79.6 FPS) maintains smooth gameplay, while 1080p allows for 200+ FPS on Medium settings.

Q: Why does 4K Ultra perform so poorly at 38.3 FPS?

A: The RX 7900 XT’s GPU compute is saturated at 4K Ultra, as evidenced by the steep 28% drop from High (53.4 FPS) to Ultra. The card’s 5376 shading units are not sufficient for this preset at 4K.

Q: Is the Ryzen 5 5600 bottlenecking the RX 7900 XT?

A: At 1080p Low, the combo reaches 218.1 FPS, and the CPU’s 4.40 GHz boost clock and 2584 single-core score suggest it is not a bottleneck until frame rates exceed 200 FPS. At higher resolutions, the GPU is clearly the limiting factor.

Q: How does this combo compare to its nearest rivals?

A: The CPU is within 0.9% of the Intel Core i7-11700F, and the GPU is exactly tied with the NVIDIA GeForce RTX 5080 Mobile (0% deltaPct), making both components highly competitive.

Q: What is the FPS difference between Low and Medium at 1080p?

A: The difference is only 15.5 FPS (218.1 vs 202.6 FPS), a 7.2% reduction, making Medium the recommended preset for better visuals without a significant frame rate penalty.

Q: Does the 20 GB VRAM matter in this game?

A: The 20 GB of GDDR6 memory with 800.0 GB/s bandwidth is more than adequate for Archeage, as the FPS drops at 4K are caused by compute limits, not memory capacity, since even 4K Ultra uses only a fraction of the available VRAM.