Archeage

The AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 5090 combination ranks 208th out of 2,761 tested combos in Archeage, placing it in the top 8% of all configurations. This is a strong position for a 2014 MMORPG, though the pairing reveals an interesting imbalance: the RTX 5090 is a top-tier GPU while the 5500X3D is a mid-range CPU. The measured frame rates confirm this dynamic — at 1080p the combo delivers 195 FPS on Low settings, but at 4K Ultra it drops to 48 FPS. The data indicates this is a GPU-bound scenario at higher resolutions, but the CPU's 96 MB of shared L3 cache helps maintain playable frame rates even in demanding MMO environments.

How This Combo Ranks

The combo's 208th place out of 2,761 tested combinations places it in the 92.5th percentile of all tested configurations. This is a respectable outcome, though it is worth remembering the ranking reflects the entire system's performance in Archeage specifically, not raw hardware potential. The RTX 5090's PassMark G3D score of 39,650 puts it in the 92nd percentile among all GPUs, while the 5500X3D's average benchmark score of 37,018 places it in the 85th percentile among CPUs. The gap between these two percentiles suggests the CPU is the limiting factor in some scenarios.

Within its immediate competitive set, the 5500X3D's 37,018 average benchmark score sits nearly identical to its nearest rivals. The AMD Ryzen 5 5600F scores 36,945 (0.2% higher), the Intel Core Ultra 5 225 scores 36,938 (0.2% higher), and the AMD Ryzen AI 7 PRO 450 scores 37,093 (0.2% lower). The Intel Core i9-12900T scores 37,112 (0.3% higher). These sub-1% differences mean the CPU choice between these four models is essentially a wash for Archeage's CPU demands. The RTX 5090's nearest rivals show a similar pattern: the NVIDIA Tesla P100 PCIe 16 GB scores 79,605 (0.3% higher), the Tesla P100 PCIe 12 GB scores 79,396 (0.6% higher), and the AMD Radeon RX 6850M XT scores 78,940 (1.1% higher). Only the AMD Radeon Pro Vega 64X scores lower at 80,959 (1.4% lower).

The practical takeaway from the ranking is that this combo delivers well above-average performance for Archeage, but the 4K Ultra result of 48 FPS shows the game can still stress even this hardware. The 1080p Low result of 195 FPS demonstrates headroom for competitive or high-refresh-rate play, but the CPU's PassMark single-thread score of 2,941 may cap performance in CPU-bound MMO scenarios with many players on screen.

CPU Role

The AMD Ryzen 5 5500X3D is a 6-core, 12-thread processor from the 5000 series, built on the Zen 3 architecture with the Vermeer codename. It operates on a 7 nm TSMC process with a 74 mm² die size, and its base clock is 3.00 GHz with a boost clock of 4.00 GHz. The 105 W TDP and dual-channel DDR4 memory support with 51.2 GB/s bandwidth position this as a mainstream desktop part, though the 96 MB shared L3 cache is the standout feature — this is characteristic of the X3D line and benefits games with large, repeatable data sets.

In Archeage, the CPU's role is most evident in the performance scaling from 1080p to 4K. At 1080p Low, the combo achieves 195 FPS, but this drops to 171 FPS at 1440p Low and 117 FPS at 4K Low. The 40% reduction from 1080p to 4K at Low settings suggests the GPU is becoming the bottleneck as resolution increases, but the CPU still needs to keep up with the game's MMO logic. The PassMark multithread score of 20,363 and single-thread score of 2,941 indicate balanced performance for a 6-core part, though the single-thread score is modest by 2025 standards.

The 5500X3D's benchmark results show strengths in specific workloads: integer math scores 60,033, floating point math scores 34,511, and extended instructions score 15,925. Data compression scores 230,392, which is notably high and suggests the large L3 cache helps with memory-intensive operations. For an MMORPG like Archeage, which often involves complex game state calculations and many concurrent entities, the 96 MB L3 cache likely provides a tangible benefit over non-X3D parts with smaller caches.

The CPU's release date of 2025-06-04 and production status of Active indicate it is a current product, and its Socket AM4 compatibility means it can drop into existing motherboards. The lack of an integrated GPU (marked as N/A) means the RTX 5090 is the sole display output source, which is expected in this configuration.

FAQ

Q: How does the 5500X3D compare to its closest CPU rivals in overall benchmark scores?

A: The 5500X3D scores 37,018 on average, which is within 0.3% of all four nearest rivals. The AMD Ryzen 5 5600F and Intel Core Ultra 5 225 are each 0.2% faster, the AMD Ryzen AI 7 PRO 450 is 0.2% slower, and the Intel Core i9-12900T is 0.3% slower. These differences are negligible for real-world gaming.

Q: Is the RTX 5090's performance in Archeage consistent with its overall GPU ranking?

A: The RTX 5090 ranks in the 92nd percentile among all GPUs with an average benchmark score of 79,842. In Archeage, the combo's 208th rank out of 2,761 (92.5th percentile) is slightly better than the GPU's standalone percentile, suggesting the CPU is not holding back the GPU significantly in this game.

Q: What frame rate can I expect at 1440p Medium settings?

A: At 2560x1440 with Medium settings, the combo delivers an average of 164 FPS, with a minimum of 139 FPS and maximum of 188 FPS. This is a smooth experience for most displays, and the minimum frame rate stays well above 60 FPS.

Q: Does the 5500X3D's 96 MB L3 cache provide a measurable benefit in Archeage?

A: The data shows the CPU's PassMark data compression score of 230,392 is exceptionally high, and the multithread score of 20,363 is solid for a 6-core part. While the measured FPS does not isolate cache effects, the CPU's overall benchmark profile suggests it handles memory-intensive workloads well, which is relevant for MMO environments.

Q: How does the combo perform at 4K Ultra compared to 4K Low?

A: At 4K Ultra, the average FPS drops to 48, while 4K Low delivers 117 FPS. This 59% reduction from Low to Ultra at 4K indicates the GPU is the primary bottleneck at this resolution, as the CPU cannot compensate for the increased graphics load.

Q: What is the CPU's single-thread performance relative to its multi-thread performance?

A: The PassMark single-thread score is 2,941, while the multithread score is 20,363. The ratio of roughly 6.9:1 is close to the core count of 6, indicating the CPU scales well with multi-threaded workloads, though single-thread performance is modest compared to newer architectures.

Measured FPS Breakdown

The measured FPS data covers three resolutions (1920x1080, 2560x1440, 3840x2160) and four settings levels (Low, Medium, High, Ultra), with 12 total data points. The Medium setting is the only one with additional min and max FPS measurements, providing insight into frame time consistency.

At 1920x1080, the combo achieves 195 FPS on Low, 187 FPS on Medium (min 159, max 215), 162 FPS on High, and 126 FPS on Ultra. The gap between Low and Ultra is 69 FPS, or 35% of the Low score. The Medium setting's min-to-max range of 56 FPS (159 to 215) shows some variability but remains far above playable thresholds.

At 2560x1440, performance drops to 171 FPS on Low, 164 FPS on Medium (min 139, max 188), 124 FPS on High, and 85 FPS on Ultra. The reduction from 1080p to 1440p ranges from 12% at Low (195 to 171) to 33% at Ultra (126 to 85). The Medium setting's range narrows to 49 FPS (139 to 188), indicating slightly better consistency at this resolution.

At 3840x2160, the results show significant scaling: 117 FPS on Low, 105 FPS on Medium (min 89, max 120), 71 FPS on High, and 48 FPS on Ultra. The drop from 1440p to 4K is 32% at Low (171 to 117), 36% at Medium (164 to 105), 43% at High (124 to 71), and 44% at Ultra (85 to 48). This increasing percentage drop at higher settings confirms the GPU becomes more stressed as both resolution and settings increase.

The Ultra setting at 4K is the only configuration that falls below 60 FPS, at 48 FPS. This is the key data point for users seeking maximum visual quality on 4K displays. The Medium settings at 4K (105 FPS) provide a much more comfortable margin, while High at 4K (71 FPS) is still above 60 FPS but close to the boundary.

Resolution Scaling

The scaling from 1080p to 4K reveals a clear pattern of GPU limitation at higher resolutions. From 1080p to 1440p, the average FPS drops by approximately 12-33% depending on settings, while from 1440p to 4K, the drop is 32-44%. The increasing percentage drop at higher settings (from 12% at Low to 33% at Ultra for the 1080p-to-1440p step) indicates that the RTX 5090's rendering workload grows faster than its raw compute can handle as both resolution and quality increase.

At Low settings, the 1080p-to-1440p drop is 24 FPS (195 to 171), and the 1440p-to-4K drop is 54 FPS (171 to 117). This 2.25x larger drop from 1440p to 4K suggests the pixel count increase (1.78x from 1080p to 1440p, 2.25x from 1440p to 4K) is the primary driver. At Ultra settings, the 1080p-to-1440p drop is 41 FPS (126 to 85), and the 1440p-to-4K drop is 37 FPS (85 to 48). The similar magnitude of these drops indicates that at Ultra, the GPU is already near its limit at 1440p, and the additional resolution at 4K pushes it below playable thresholds.

The CPU's role in this scaling is indirect but relevant. The 5500X3D's single-thread score of 2,941 is not particularly high, and in CPU-bound MMO scenarios (large player gatherings, complex UI), the CPU could cap frame rates at lower resolutions. The fact that 1080p Low achieves 195 FPS suggests the CPU can handle this scenario, but the 4K Low result of 117 FPS — a 40% drop — indicates the GPU is now the constraint. The data supports the conclusion that at 1080p and 1440p, the combo is balanced, but at 4K, the RTX 5090 is the limiting component.

Settings Recommendations

The measured data suggests that Medium settings offer the best balance of performance and visual quality across all three resolutions. At 1080p Medium, the combo delivers 187 FPS with a minimum of 159 FPS, which is well above any refresh rate commonly in use. At 1440p Medium, 164 FPS (min 139) remains excellent for high-refresh-rate displays. Even at 4K Medium, 105 FPS (min 89) provides a smooth experience that exceeds most 4K displays' refresh rates.

High settings are a viable alternative for users prioritizing visual fidelity. At 1080p High, 162 FPS is still very playable, and at 1440p High, 124 FPS is strong. However, at 4K High, the average drops to 71 FPS, which is above 60 FPS but leaves little headroom for demanding scenes or player-heavy areas. The minimum FPS is not measured for High settings, so the frame time consistency is unknown.

Ultra settings are only recommended for 1080p displays where 126 FPS is acceptable. At 1440p Ultra, 85 FPS is playable but not ideal for competitive play, and at 4K Ultra, 48 FPS falls below the 60 FPS threshold that most players consider the minimum for a smooth experience. The lack of min/max data for Ultra settings means the worst-case frame rates are unknown, which introduces risk for users who are sensitive to stutter.

Low settings are unnecessary for this hardware except for maximum competitive advantage. The 1080p Low result of 195 FPS and 1440p Low of 171 FPS provide the highest frame rates, but the visual quality loss is significant. For most users, Medium at 1080p or 1440p represents the sweet spot, with the option to drop to Medium at 4K if resolution is the priority. The RTX 5090's 32 GB GDDR7 memory and 1.79 TB/s bandwidth ensure that texture-heavy settings do not cause memory-related stutters, but the GPU's compute limits at 4K Ultra are the deciding factor.