Archeage

Archeage, a 2014 MMORPG, presents a unique challenge for modern hardware due to its age and engine limitations. The measured data for the AMD Ryzen 5 5600F and NVIDIA GeForce RTX 5090 combination reveals a system that is overwhelmingly capable, yet the results are heavily dictated by the game's engine and the selected graphics preset. The data indicates that this combination is best utilized at higher resolutions with Medium settings to balance visual fidelity with smooth frame rates, as the game's performance scaling is inconsistent across its presets.

Settings Recommendations

The benchmark data clearly shows that the "Medium" preset offers the most compelling experience for this hardware combination. While "Low" settings provide the highest average frame rates, the performance leap from "Medium" to "Low" is not proportional to the expected visual quality drop, and the "Medium" preset provides a much higher minimum frame rate at 4K. At 3840x2160, the "Medium" preset achieves an average of 105 FPS with a minimum of 89 FPS, which is a playable and smooth experience for an MMORPG. In contrast, the "Low" preset at the same resolution averages 117 FPS, but this 12 FPS gain comes at the cost of significantly reduced visual detail. The "High" preset at 4K drops to an average of 71 FPS, which, while acceptable, is a substantial 34 FPS decrease from "Medium".

The "Ultra" preset is not recommended for this title. At 3840x2160, it produces an average of only 48 FPS, which is below the threshold for a consistently smooth experience in a game that benefits from quick camera movements and ability usage. The performance cost of "Ultra" is severe; it is 57 FPS slower than the "Medium" preset at 4K. This pattern continues at lower resolutions. At 2560x1440, "Ultra" averages 85 FPS, while "Medium" hits 157 FPS, a difference of 72 FPS. The data suggests that the "Ultra" preset in Archeage has a disproportionately high performance impact relative to its visual gains, likely due to inefficient rendering techniques from the game's 2014 engine.

Therefore, the optimal choice is the "Medium" preset. It provides the best compromise between visual clarity and performance, ensuring that the RTX 5090's power is utilized to maintain high frame rates without being bottlenecked by the game's engine inefficiencies at higher settings. For users with high refresh rate monitors at 1920x1080, the "Low" preset at 186 FPS might be tempting, but the "Medium" preset's 179 FPS average with a 152 FPS minimum still provides an excellent experience with better image quality. The recommendation is to prioritize "Medium" for a stable and high-performance experience across all resolutions.

FAQ

Q: What is the best settings preset for the AMD Ryzen 5 5600F and RTX 5090 in Archeage?

A: The "Medium" preset provides the most balanced experience. It delivers an average of 105 FPS at 4K, 157 FPS at 1440p, and 179 FPS at 1080p, offering high performance with a substantial improvement in visual quality over "Low" settings without the severe performance penalty of "High" or "Ultra".

Q: How does the RTX 5090's performance compare to its nearest rivals in this system's context?

A: The RTX 5090's average benchmark score is 79,842, which places it 0.3% ahead of the NVIDIA Tesla P100 PCIe 16 GB and 0.6% ahead of the Tesla P100 PCIe 12 GB. It is 1.1% ahead of the AMD Radeon RX 6850M XT and 1.4% behind the AMD Radeon Pro Vega 64X. These are marginal differences in synthetic benchmarks, but in-game, the RTX 5090's performance is more dependent on the CPU and game engine.

Q: Is the AMD Ryzen 5 5600F a bottleneck for the RTX 5090 in this game?

A: The data suggests that the CPU's single-threaded performance is a limiting factor, especially at lower resolutions. The Ryzen 5 5600F has a single-thread score of 2,872. At 1080p, the frame rate increase from "Low" to "Ultra" is only 60 FPS (from 186 to 126), while at 4K, the difference is 69 FPS (from 117 to 48). This indicates that at 1080p, the CPU is more likely to become a bottleneck, preventing the GPU from reaching its full potential, whereas at 4K, the GPU workload is more demanding.

Q: Does the "Ultra" preset offer a good experience with this hardware?

A: No. The "Ultra" preset performs poorly across all resolutions. It averages only 48 FPS at 4K, 85 FPS at 1440p, and 126 FPS at 1080p. These frame rates are significantly lower than those of the "Medium" preset, making "Ultra" an undesirable choice for consistent gameplay, especially at higher resolutions.

Q: How does this combo rank among other tested combinations for Archeage?

A: The AMD Ryzen 5 5600F and NVIDIA GeForce RTX 5090 combination ranks 245th out of 2,761 tested combos for this game. This places it in the top 9% of all tested combinations, indicating that it is a very high-performing setup for Archeage, despite the game's age.

Q: What is the performance difference between 1080p and 4K on the "Medium" preset?

A: On the "Medium" preset, the average frame rate drops from 179 FPS at 1920x1080 to 105 FPS at 3840x2160. This is a 74 FPS decrease, or a 41% reduction in performance, when moving from 1080p to 4K. The minimum frame rate also drops from 152 FPS to 89 FPS.

CPU Role

The AMD Ryzen 5 5600F, with its 6 cores and 12 threads based on the Zen 3 architecture, plays a significant role in Archeage's performance. The game, being an MMORPG from 2014, is known to be sensitive to single-threaded performance for game logic and network processing. The Ryzen 5 5600F's single-thread benchmark score is 2,872, which is a strong result and places the CPU in the 85th percentile of all CPUs. This indicates that the CPU is well-equipped to handle the game's primary thread, but the overall frame rates are still limited by the game engine's ability to utilize the hardware.

The CPU's cache configuration, with 32 MB of shared L3 cache, helps in maintaining game data locally, which is beneficial for an MMORPG with many entities and player interactions. The Ryzen 5 5600F's multithreaded score of 19,236 suggests that it can handle background tasks and the game's auxiliary threads, but the primary bottleneck in Archeage is often the single-thread performance. The data shows that at 1920x1080, the frame rate difference between "Low" and "Ultra" is 60 FPS, which is a smaller absolute gap than at 4K (69 FPS). This suggests that at 1080p, the CPU is more likely to be the limiting component, as the GPU is not being fully stressed.

The CPU's performance relative to its nearest rivals is very close. Its average benchmark score is 36,945, which is nearly identical to the Intel Core Ultra 5 225 (0% delta) and the AMD Ryzen 5 5500X3D (-0.2% delta). This means that for Archeage, the choice between these CPUs would likely result in very similar performance, as the game's engine is the primary constraint. The CPU's base clock of 3.00 GHz and boost clock of 4.00 GHz are adequate for the game, but the architecture's efficiency is more important than raw clock speed in this scenario. The data indicates that the CPU is a solid partner for the RTX 5090, but its performance ceiling is reached in CPU-bound scenarios at lower resolutions.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600F and the NVIDIA GeForce RTX 5090 achieves a rank of 245 out of 2,761 tested combinations for Archeage. This places the system in the top 8.9% of all tested setups, which is an exceptional result. This high ranking is largely due to the immense power of the RTX 5090, which is in the 92nd percentile of all GPUs. The RTX 5090's average benchmark score of 79,842 confirms its raw compute power, and it is capable of delivering high frame rates even in a demanding scenario like 4K gaming.

However, the ranking also highlights the CPU's role. While the Ryzen 5 5600F is a capable processor, it is not the absolute fastest available. Its ranking in the 85th percentile of all CPUs is strong, but it does not match the top-tier performance of the GPU. The combination's rank is a synthesis of these two components. The GPU's raw power is the primary driver of the high ranking, but the CPU's performance prevents the system from reaching the very top of the list. The 245th rank out of 2,761 means that there are 244 other combinations that perform better in Archeage, likely featuring more powerful CPUs that can better feed the GPU in CPU-bound scenarios.

The data suggests that the system is well-balanced for 4K gaming, where the GPU is the primary bottleneck. In this scenario, the CPU's performance is less critical, and the RTX 5090's power is fully utilized. The ranking is a clear indication that this is a high-end system that can handle Archeage at its highest frame rates with the right settings, but it also shows that the CPU is the component holding it back from a higher position. For players seeking the absolute best performance, a more powerful CPU would be needed, but for the vast majority of users, this combination is more than sufficient.

Resolution Scaling

The measured data shows a clear and expected trend: frame rates decrease as resolution increases. However, the rate of this decrease varies significantly depending on the graphics preset. On the "Medium" preset, the average frame rate drops from 179 FPS at 1920x1080 to 157 FPS at 2560x1440, and then to 105 FPS at 3840x2160. This is a 74 FPS drop from 1080p to 4K, representing a 41% decrease in performance. This indicates that the system is becoming more GPU-bound at higher resolutions, as the RTX 5090 has to render more pixels.

The "Low" preset shows a similar scaling pattern, with an average of 186 FPS at 1080p, 163 FPS at 1440p, and 117 FPS at 4K. The 69 FPS difference between 1080p and 4K is slightly smaller than on "Medium," suggesting that the CPU is more of a limiting factor at lower settings. The "Ultra" preset exhibits the most significant performance drop, with frame rates falling from 126 FPS at 1080p to 85 FPS at 1440p and finally to 48 FPS at 4K. This is a 78 FPS drop from 1080p to 4K, confirming that "Ultra" settings are extremely demanding and scale poorly.

The analysis of the resolution scaling points to a shift in the bottleneck. At 1080p, the CPU's single-thread performance is likely the primary limiter. The frame rate difference between "Low" and "Ultra" at 1080p is 60 FPS, while at 4K, it is 69 FPS. This suggests that at 1080p, the GPU is not the limiting factor, as it can render frames faster than the CPU can process game logic. As the resolution increases to 4K, the GPU workload becomes more intensive, and the RTX 5090's performance becomes the primary constraint. This is evidenced by the larger absolute frame rate drop on the "Medium" preset (74 FPS) compared to "Low" (69 FPS), indicating that the GPU is being pushed harder.

Measured FPS Breakdown

The following is a detailed breakdown of the measured average frame rates for the AMD Ryzen 5 5600F and NVIDIA GeForce RTX 5090 combination in Archeage.

1920x1080 (1080p):

• Low: The average frame rate is 186 FPS.
• Medium: The average frame rate is 179 FPS, with a minimum of 152 FPS and a maximum of 206 FPS.
• High: The average frame rate is 155 FPS.
• Ultra: The average frame rate is 126 FPS.

At 1080p, all settings provide a playable experience, with even "Ultra" exceeding 120 FPS. The performance difference between "Low" and "Medium" is only 7 FPS, making "Medium" a clear choice for better visuals with minimal performance loss. The jump from "Medium" to "High" is more significant at 24 FPS, and the jump to "Ultra" is another 29 FPS.

2560x1440 (1440p):

• Low: The average frame rate is 163 FPS.
• Medium: The average frame rate is 157 FPS, with a minimum of 133 FPS and a maximum of 180 FPS.
• High: The average frame rate is 124 FPS.
• Ultra: The average frame rate is 85 FPS.

At 1440p, the "Low" and "Medium" presets remain highly playable, with "Medium" providing a minimum of 133 FPS, which is still very smooth. The "High" preset drops below 124 FPS, which is still good, but the "Ultra" preset's 85 FPS average is a significant downgrade, showing a 72 FPS drop from "Medium".

3840x2160 (4K):

• Low: The average frame rate is 117 FPS.
• Medium: The average frame rate is 105 FPS, with a minimum of 89 FPS and a maximum of 120 FPS.
• High: The average frame rate is 71 FPS.
• Ultra: The average frame rate is 48 FPS.

At 4K, the performance gap becomes more pronounced. "Low" and "Medium" are still capable of delivering high frame rates, with "Medium" maintaining a minimum above 60 FPS. The "High" preset is playable but borders on the edge of smoothness at 71 FPS. The "Ultra" preset is not suitable for 4K gaming, as its 48 FPS average is below the standard for a responsive experience. The data clearly shows that "Medium" is the optimal preset for 4K, offering a 34 FPS advantage over "High" and a 57 FPS advantage over "Ultra".