Archeage

The AMD Ryzen 5 5500 and AMD Radeon RX 6650 XT combination delivers playable performance in Archeage, but the pairing shows a clear GPU bottleneck at higher resolutions. Measured frame rates range from 135.3 FPS at 1080p Low to 22.3 FPS at 4K Ultra, and the combo ranks 1110th out of 1727 tested configurations. The CPU's strong multi-threaded scores and the GPU's 8 GB VRAM make this a balanced mid-range setup for 1080p gaming, but 4K Ultra is not viable.

CPU Role

The Ryzen 5 5500 is a 6-core, 12-thread processor based on Zen 3 architecture, with a base clock of 3.60 GHz and a boost clock of 4.20 GHz. It features 16 MB of L3 cache and a 65 W TDP, and it supports DDR4 memory with a dual-channel bus and 51.2 GB/s bandwidth. In synthetic benchmarks, the CPU scores 16,429 in Cinebench R23 multi-core and 2,319 in single-core, while Passmark reports 19,330 for multi-thread and 3,058 for single-thread. These results place the CPU at the 79th percentile among all tested processors.

Compared to its nearest rivals, the Ryzen 5 5500 is effectively tied with the Intel Core i5-12500 (average score 20,897 vs. 20,875, a delta of -0.1%) and the AMD Ryzen 5 PRO 4655GE (20,900, -0.1%). It also matches the AMD EPYC 7J13 (20,845, +0.1%) and trails the Intel Core i5-12600T (20,917, -0.2%). For an MMORPG like Archeage, which relies heavily on CPU logic for player positions, quest states, and network handling, the 6-core/12-thread configuration provides ample headroom. At 1080p Low, the combo achieves 135.3 FPS, suggesting the CPU can feed the GPU well beyond typical monitor refresh rates. However, at 4K Ultra, the frame rate collapses to 22.3 FPS, indicating that the CPU is not the limiting factor at higher resolutions—the GPU is.

GPU Role

The Radeon RX 6650 XT is built on the RDNA 2.0 architecture with a Navi 23 chip. It has 8 GB of GDDR6 memory on a 128-bit bus, providing 280.3 GB/s of bandwidth. The GPU runs at a base clock of 2055 MHz, a game clock of 2410 MHz, and a boost clock of 2635 MHz. Its compute power is rated at 10.79 TFLOPS FP32, and it sits at the 72nd percentile among all GPUs. In the Passmark G3D benchmark, it scores 17,166, with a GPU compute score of 7,532.

The GPU's nearest rivals include the AMD Radeon RX 6800M (average score 29,011, delta 0%), the AMD Radeon RX 470 (28,996, +0.1%), the Intel Arc A370M (29,175, -0.5%), and the AMD Radeon RX Vega M GH (29,197, -0.6%). These near-ties suggest the RX 6650 XT sits in a competitive mid-range band. In Archeage, the GPU's 8 GB VRAM is sufficient for 1080p and 1440p textures, but at 4K Ultra the frame rate drops to 22.3 FPS, pointing to memory bandwidth or rasterization limits. The 128-bit bus and 280.3 GB/s bandwidth become strained as pixel count quadruples from 1080p to 4K.

FAQ

Q: What average FPS does this combo achieve at 1080p High settings?

A: The measured average is 80.1 FPS at 1920x1080 with High settings.

Q: How does the Ryzen 5 5500 compare to the Intel Core i5-12500?

A: The Ryzen 5 5500 has an average benchmark score of 20,875, while the i5-12500 scores 20,897—a delta of -0.1%, meaning they perform nearly identically.

Q: What is the combo's rank among all tested combinations?

A: The combo ranks 1110th out of 1727 tested configurations in Archeage.

Q: At 1440p Ultra, what is the average FPS?

A: The average is 34.3 FPS at 2560x1440 with Ultra settings.

Q: Is the GPU or CPU the bottleneck at 4K resolution?

A: The frame rate drops from 135.3 FPS at 1080p Low to 51.4 FPS at 4K Low, and to 22.3 FPS at 4K Ultra. This scaling pattern indicates the GPU is the primary limiter at higher resolutions.

Q: How much VRAM does the RX 6650 XT have?

A: It has 8 GB of GDDR6 memory.

How This Combo Ranks

In Archeage, this CPU-GPU combination places 1110th out of 1727 tested combos. That means 617 configurations are slower, but the rank sits in the lower-middle portion of the database. The CPU alone is at the 79th percentile and the GPU at the 72nd, yet the combo rank is lower than either component's percentile suggests. This discrepancy indicates that the pairing may not be optimally balanced for this specific game. The measured frame rates show a steep drop from 1080p to 4K, reinforcing that the GPU is the limiting factor. At 1080p, the combo can push beyond 100 FPS on Low and Medium settings, but at 4K even Low settings fail to hit 60 FPS. For a game like Archeage, where large-scale battles and crowded cities tax the CPU, the 6-core/12-thread processor likely keeps up with the GPU at 1080p, but the GPU's 8 GB VRAM and 128-bit bus cap performance at higher resolutions.

Measured FPS Breakdown

The following table lists all measured average FPS values from the data.

| Resolution | Settings | Avg FPS |

|------------|----------|---------|

| 3840x2160 | Low | 51.4 |

| 3840x2160 | Medium | 48.8 |

| 3840x2160 | High | 33.0 |

| 3840x2160 | Ultra | 22.3 |

| 2560x1440 | Low | 88.2 |

| 2560x1440 | Medium | 82.0 |

| 2560x1440 | High | 56.1 |

| 2560x1440 | Ultra | 34.3 |

| 1920x1080 | Low | 135.3 |

| 1920x1080 | Medium | 118.7 |

| 1920x1080 | High | 80.1 |

| 1920x1080 | Ultra | 53.3 |

At 1080p, the gap between Low and Ultra is 82.0 FPS (from 135.3 to 53.3), showing that the GPU scales well with settings. At 1440p, the spread narrows to 53.9 FPS (88.2 to 34.3), and at 4K it narrows further to 29.1 FPS (51.4 to 22.3). This compression at higher resolutions indicates that the GPU is already saturated, so lowering settings yields diminishing returns.

Settings Recommendations

For a 60 FPS target, the data supports the following choices:

• 1080p: High settings deliver 80.1 FPS, while Medium delivers 118.7 FPS and Low 135.3 FPS. Ultra falls below 60 FPS at 53.3 FPS. Therefore, High is the best preset for visual quality while maintaining a comfortable margin above 60 FPS. Medium offers a large headroom for demanding scenes, and Low is unnecessary unless targeting very high refresh rates.
• 1440p: Medium achieves 82.0 FPS and Low 88.2 FPS, both above 60. High drops to 56.1 FPS, just below the threshold, and Ultra is 34.3 FPS. Medium is the recommended setting for 1440p, as it provides a solid 60+ FPS experience with better visuals than Low. Users who prioritize frame rate can use Low, but the visual difference between Low and Medium is typically noticeable.
• 4K: No setting reaches 60 FPS. Low is the only option above 50 FPS at 51.4, while Medium is 48.8, High 33.0, and Ultra 22.3. For a 30 FPS playable experience, Medium (48.8) or Low (51.4) are acceptable, but High and Ultra are not recommended. If 4K is a priority, lowering resolution to 1440p is the better path.

Resolution Scaling

The frame rate drops from 1080p to 1440p and 4K reveal a clear GPU-bound behavior. At Low settings, the average FPS falls from 135.3 at 1080p to 88.2 at 1440p (a 34.8% reduction) and to 51.4 at 4K (a 62.0% reduction from 1080p). At High settings, the drop is from 80.1 to 56.1 (30.0%) and to 33.0 (58.8%). The percentage loss from 1080p to 4K is roughly consistent across settings, which is typical of a GPU-limited scenario where pixel count is the dominant factor. The CPU's contribution remains constant regardless of resolution, so the scaling pattern directly reflects the GPU's rendering capacity. The RX 6650 XT's 8 GB VRAM and 280.3 GB/s bandwidth are sufficient for 1080p and 1440p, but at 4K the memory bus becomes a bottleneck, especially at Ultra where the 22.3 FPS result indicates severe strain. This data suggests that for Archeage, the combo is best suited to 1080p high-refresh or 1440p 60 FPS play, with 4K requiring a more powerful GPU.