Archeage

The AMD Ryzen 5 5500 and NVIDIA GeForce RTX 3070 combination delivers a performance profile in Archeage that is heavily dictated by resolution and preset. At 1080p, the system demonstrates a wide range of frame rates, from 174.4 FPS on Low settings down to 70.4 FPS on Ultra. Moving to 1440p, the average frame rates remain robust, with Low settings achieving 114.8 FPS and Ultra still maintaining 50.8 FPS. At 4K, the system becomes increasingly strained, with the Ultra preset dropping to 26.1 FPS, while the Low preset manages 69.9 FPS. This data indicates that the pairing is capable of high refresh rate gameplay at lower resolutions but will require careful settings management for 4K displays.

Resolution Scaling

The measured frame rates reveal a clear pattern of performance degradation as resolution increases. At 1080p with the High preset, the average frame rate is 103 FPS, which drops to 70.6 FPS at 1440p, and further to 39.6 FPS at 4K. This represents a 31.5% reduction in performance from 1080p to 1440p, and a 61.6% reduction from 1080p to 4K. The scaling is consistent across presets, with the Low preset showing a similar trajectory: 174.4 FPS at 1080p, 114.8 FPS at 1440p, and 69.9 FPS at 4K.

This performance curve strongly indicates that the RTX 3070 becomes the limiting component at higher resolutions. The 8 GB of GDDR6 memory and its 448.0 GB/s bandwidth are sufficient for 1080p and 1440p, but the pixel throughput demands of 4K begin to saturate the GPU's capabilities. The data suggests that the Ryzen 5 5500, with its 6 cores and 12 threads, provides adequate headroom for the GPU to operate without a CPU bottleneck at 1440p and below. However, the gap between the 1440p and 4K results widens as settings increase, confirming that the GPU's rendering workload is the primary constraint.

The Ultra preset at 4K, producing only 26.1 FPS, illustrates the extreme demand of this configuration. This is a 62.9% decrease from the 4K High preset's 39.6 FPS, showing that the Ultra preset imposes a significant additional load. The data indicates that for smooth 4K gameplay, the Low or Medium presets would be necessary, as they achieve 69.9 FPS and 58.8 FPS respectively. The scaling between resolutions is not linear, and the GPU's performance ceiling is reached much sooner at 4K than at lower resolutions.

FAQ

Q: What is the maximum average frame rate achievable with this combo at 1080p?

A: The highest measured average frame rate is 174.4 FPS, achieved with the Low preset at 1920x1080. The Medium preset reaches 154.7 FPS, and the High preset delivers 103 FPS.

Q: How does the Ultra preset perform compared to High at 1440p?

A: At 2560x1440, the Ultra preset averages 50.8 FPS, which is 19.8 FPS lower than the High preset's 70.6 FPS. This represents a 28% performance penalty for the highest visual quality setting.

Q: Is the CPU or GPU the limiting factor in this game at 4K?

A: The benchmark data indicates the RTX 3070 is the primary bottleneck at 3840x2160. The frame rates drop significantly across all presets at 4K, with the Ultra preset falling to 26.1 FPS, which is consistent with GPU-bound behavior rather than CPU limitations.

Q: What is the performance difference between the Low and Ultra presets at 1080p?

A: At 1920x1080, the Low preset achieves 174.4 FPS, while the Ultra preset achieves 70.4 FPS. This is a difference of 104 FPS, or approximately 148% higher performance when using Low settings.

Q: Can this system maintain 60 FPS at 1440p with any preset?

A: Yes, the High preset at 1440p averages 70.6 FPS, and the Medium preset averages 102.4 FPS. The Low preset reaches 114.8 FPS. Only the Ultra preset falls below 60 FPS at this resolution.

Q: How does the combo rank among all tested combinations for Archeage?

A: The combination of the AMD Ryzen 5 5500 and NVIDIA GeForce RTX 3070 ranks 795 out of 1727 tested combos, placing it in the upper-middle portion of the database.

GPU Role

The NVIDIA GeForce RTX 3070, built on the Ampere architecture with a GA104 chip, is the dominant component in this pairing. Its 8 GB of GDDR6 memory on a 256-bit bus provides 448.0 GB/s of bandwidth, which is critical for the texture-heavy environments of an MMORPG like Archeage. The GPU's boost clock of 1725 MHz and its 5888 shading units contribute to its ability to handle the game's rendering demands, though the data shows that the 4K resolution is particularly taxing.

The RTX 3070's 20.31 TFLOPS of FP32 performance is evident in the 1080p results, where the system achieves over 100 FPS on High settings. However, the transition to 4K exposes the limitations of the 8 GB memory capacity and the overall GPU throughput. The measured frame rates at 4K, ranging from 69.9 FPS on Low to 26.1 FPS on Ultra, demonstrate that the GPU is working at or near its maximum capacity. The GPU's percentile ranking of 72 among all GPUs, with an average benchmark score of 28238, places it in a competitive position, though its nearest rivals show minimal deltas, with the AMD Radeon RX 6600 XT being 0.9% behind and the NVIDIA GeForce GTX 980 Ti being 1% ahead.

The GPU's memory bandwidth of 448.0 GB/s is a key factor in its performance at 1440p, where it maintains playable frame rates across all presets. The data suggests that the GPU is well-suited for 1080p and 1440p gaming but is not optimized for 4K Ultra settings in this specific title. The VRAM allocation and clock speeds work together to provide a smooth experience at lower resolutions, but the 4K results indicate that the GPU's compute resources are the limiting factor rather than the CPU.

How This Combo Ranks

In the comprehensive database of tested CPU and GPU combinations for Archeage, this pairing of the AMD Ryzen 5 5500 and NVIDIA GeForce RTX 3070 ranks 795 out of 1727 total combos. This position places it in the 46th percentile of all tested configurations, indicating a mid-tier performance level. The ranking reflects the balance between the CPU's capabilities and the GPU's raw power, and the measured frame rates across different resolutions and settings confirm that this is a competent but not top-tier combination for this game.

The Ryzen 5 5500 itself holds a 79th percentile ranking among all CPUs, with an average benchmark score of 20875. Its nearest rivals, such as the Intel Core i5-12500 with a delta of -0.1% and the AMD EPYC 7J13 with a delta of 0.1%, show that the CPU is well-positioned in terms of raw processing power. However, the combo's overall rank in Archeage suggests that the game's performance is more dependent on the GPU, especially at higher resolutions. The RTX 3070's 72nd percentile ranking among GPUs, with an average score of 28238, is a strong indicator of its capability, but the 4K results drag the combo's overall standing down compared to systems with more powerful GPUs.

The ranking of 795 out of 1727 combos is a useful reference point for potential users. It shows that this configuration is neither at the bottom nor the top of the performance spectrum. The data indicates that systems with higher-tier GPUs would rank significantly better, while those with lower-tier CPUs might see similar results if the GPU is the primary bottleneck. This combo's position is a direct result of the RTX 3070's performance ceiling at 4K, which limits the system's overall capability in Archeage despite the CPU's solid benchmark scores.

Settings Recommendations

The measured frame rates provide clear guidance for optimal settings based on resolution. At 1080p, the High preset offers an excellent balance with 103 FPS, while the Medium preset at 154.7 FPS provides even greater headroom for high refresh rate displays. The Ultra preset at 70.4 FPS is still playable but incurs a significant performance cost for marginal visual gains. For users prioritizing maximum frame rates, the Low preset at 174.4 FPS is the best choice, though it may compromise visual fidelity.

At 1440p, the High preset is the recommended starting point, delivering 70.6 FPS. This provides a smooth experience on most displays. The Medium preset at 102.4 FPS offers additional headroom for users with 144Hz monitors, while the Low preset at 114.8 FPS is suitable for competitive play. The Ultra preset at 50.8 FPS falls below the 60 FPS threshold and is not recommended for general use, as the visual improvement does not justify the performance drop.

At 4K, the Low preset is the only configuration that maintains a consistently playable frame rate at 69.9 FPS. The Medium preset at 58.8 FPS is borderline, and the High preset at 39.6 FPS is only suitable for slower-paced activities. The Ultra preset at 26.1 FPS is not recommended for gameplay. The data shows that the RTX 3070 is not optimized for 4K gaming in Archeage, and users with 4K displays should either lower their resolution or accept reduced settings. The measured results indicate that the best experience is achieved at 1440p with High settings, balancing visual quality with performance.