Archeage

The AMD Ryzen 5 2600 paired with the NVIDIA GeForce RTX 3060 Ti delivers a broad range of performance in Archeage, with results that shift dramatically depending on resolution and quality preset. This combination sits at rank 1893 out of 3708 tested combos in the game, placing it just past the midpoint of the database. The measured frame rates reveal a system that can handle 1080p and 1440p gaming comfortably at most settings, but 4K Ultra remains a stretch. Below is a detailed breakdown of how this combo behaves across resolutions, settings, and what the CPU contributes to the overall experience.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent across all settings, indicating that the GPU becomes the primary limiting factor at higher resolutions. At Low settings, the average FPS falls from 149 at 1920x1080 to 107 at 2560x1440, then to 61 at 3840x2160. That is a 28% reduction going from 1080p to 1440p, and a further 43% drop moving to 4K. The pattern repeats at Medium settings: 141 FPS at 1080p, 95 FPS at 1440p, and 54 FPS at 4K. High settings see 96 FPS at 1080p, 65 FPS at 1440p, and 37 FPS at 4K. Ultra settings produce 65 FPS at 1080p, 44 FPS at 1440p, and just 25 FPS at 4K.

These numbers tell a clear story about the limiting component. At 1080p, the CPU has enough headroom to feed the GPU, and the frame rates are high enough that the RTX 3060 Ti is doing most of the work. However, the gap between Low and Ultra at 1080p—149 FPS versus 65 FPS—shows that the GPU is still the bottleneck even at the lowest resolution, since raising settings increases load on the graphics card and drops performance proportionally. At 4K, the GPU is clearly overwhelmed, especially at Ultra where the average FPS falls to 25, which is below playable thresholds for most users. The 1440p results sit in a sweet spot: the GPU is stressed enough to show meaningful differences between presets, but not so stressed that even Low settings drop below 60 FPS.

The scaling behavior suggests that this combo is best suited for 1080p and 1440p gaming. At 4K, only Low settings manage to stay above 60 FPS on average, and even that is marginal. The measured data shows that the RTX 3060 Ti, with its 8 GB of GDDR6 memory and 448.0 GB/s bandwidth, has enough raw capacity for 1440p but runs out of headroom at 4K with higher presets. The CPU, which has 6 cores and 12 threads with a base clock of 3.40 GHz and boost clock of 3.90 GHz, does not appear to be the constraint in this game, as frame rates scale predictably with resolution—a sign that the GPU is the dominant factor in these tests.

Settings Recommendations

For each resolution, the measured FPS rows provide clear guidance on which preset offers the best balance. At 1920x1080, Medium settings deliver 141 FPS average with a minimum of 120 FPS and a maximum of 162 FPS. This is nearly as fast as Low (149 FPS) but with higher visual quality. High settings drop to 96 FPS average, which is still smooth but a 32% reduction from Medium. Ultra at 1080p yields 65 FPS average, which is playable but not ideal for fast-paced combat. The data suggests that Medium is the optimal choice at 1080p: it stays well above 60 FPS, has a tight min-max range, and provides better visuals than Low without the steep penalty of High or Ultra.

At 2560x1440, Medium again stands out. The average FPS is 95, with a minimum of 81 and maximum of 109. Low hits 107 FPS average, but the difference between Low and Medium is only 12 FPS, making Medium the better pick for visual fidelity. High drops to 65 FPS average, which is still within playable range, but the margin above 60 FPS is thin. Ultra falls to 44 FPS average, which is below the threshold for smooth gameplay in most scenarios. For 1440p, Medium is the clear recommendation: it maintains a comfortable margin over 60 FPS, and the minimum of 81 FPS means even demanding scenes should stay fluid.

At 3840x2160, the options are limited. Low settings produce 61 FPS average, which is just above 60 FPS but likely to dip below in busy areas. Medium averages 54 FPS with a minimum of 46 FPS and a maximum of 63 FPS, which is playable but not consistently smooth. High averages 37 FPS, and Ultra averages 25 FPS—both are too low for practical use. For 4K, Low is the only preset that keeps the average above 60 FPS, but even that is marginal. Medium might be acceptable for slower-paced content, but the minimum of 46 FPS suggests stuttering during combat or large crowds. The data indicates that 4K is not this combo’s strength, and users should either drop to 1440p or accept Low settings at 4K.

Across all resolutions, Medium provides the best compromise between frame rate and visual quality. At 1080p and 1440p, it delivers high FPS with a solid minimum, while at 4K it offers the only non-Ultra option that stays above 50 FPS on average. Low settings are faster but noticeably less detailed, and High/Ultra bring steep performance costs that are not justified by the incremental visual gains, especially at higher resolutions.

CPU Role

The AMD Ryzen 5 2600 is a 6-core, 12-thread processor from the Zen architecture, codenamed Pinnacle Ridge, built on a 12 nm process. It has a base clock of 3.40 GHz and a boost clock of 3.90 GHz, with 16 MB of shared L3 cache. In synthetic benchmarks, it scores 1248 in Cinebench R15 multi-core and 157.3 in single-core, along with 5648 in Geekbench multi-core and 1154 in single-core. Its Passmark multithread score is 13160, and single-thread score is 2239. The CPU sits at the 75th percentile among all tested CPUs, with an average benchmark score of 21484.

In Archeage, the CPU’s role appears secondary to the GPU, based on the resolution scaling data. The frame rates drop consistently as resolution increases, which is typical of GPU-bound scenarios. If the CPU were the bottleneck, we would expect the FPS to be similar across resolutions at the same settings, but that is not the case. For example, at Low settings, 1080p yields 149 FPS, 1440p yields 107 FPS, and 4K yields 61 FPS—a clear GPU-bound pattern. The same holds for Medium, High, and Ultra presets.

The CPU’s 6 cores and 12 threads are sufficient for Archeage, which is an MMORPG from 2014 and likely does not require high core counts. The boost clock of 3.90 GHz provides decent single-thread performance, which matters for game logic and draw calls, but the measured results suggest that even at 1080p, the GPU is the limiting factor. The nearest rivals in CPU benchmarks include the Intel Core Ultra 5 228V (0.2% higher average score), Intel Core i9-11900H (0.5% higher), AMD EPYC 9454 (1.2% higher), and Intel Xeon D-1746TER (0.7% lower). These differences are small, indicating that the Ryzen 5 2600 is competitive with newer parts in general compute, but none of that matters if the game is GPU-bound.

The CPU’s memory bandwidth is 46.9 GB/s with dual-channel DDR4 support, which is adequate for this title. The lack of integrated graphics means the RTX 3060 Ti handles all rendering, and the PCIe Gen 3 interface with 16 lanes is sufficient for the GPU’s bandwidth needs. In practice, the CPU does not appear to hold back the RTX 3060 Ti in Archeage, as evidenced by the high frame rates at 1080p and the smooth scaling across resolutions. The data shows that this combo is balanced, with the GPU being the primary determinant of performance.

How This Combo Ranks

This specific combination of the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 3060 Ti ranks 1893 out of 3708 tested combos in Archeage, placing it in the 51st percentile. That means roughly half of all tested combinations perform better, and half perform worse. Given that the RTX 3060 Ti is a mid-range GPU from the GeForce 30-series, and the Ryzen 5 2600 is an older but capable CPU, this ranking is reasonable. The GPU’s percentile among all GPUs is 59, and its average benchmark score is 16129, with nearest rivals including the AMD Radeon RX 9060 (0.7% higher score), AMD Radeon Pro 5600M (1.4% lower), AMD Radeon RX 5700 XT (1.4% lower), and AMD Radeon R9 370X (1.7% lower). These rival deltas are small, indicating that the RTX 3060 Ti is closely matched with several other cards in raw compute.

However, the combo rank in Archeage is not solely determined by GPU or CPU scores. The game’s engine, which is an MMORPG from 2014, may have specific optimization quirks. The measured FPS data shows that this combo can achieve 149 FPS at 1080p Low and 141 FPS at 1080p Medium, which are strong results. At 1440p, Medium averages 95 FPS, which is above the 60 FPS threshold for smooth play. At 4K, the combo struggles, with only Low settings reaching 61 FPS average. This suggests that the combo is well-suited for 1080p and 1440p gaming, but not for 4K.

Compared to other combos in the database, a rank of 1893 out of 3708 means this setup is ahead of just over half the tested combinations. That is a solid mid-pack result, especially considering that the CPU is from 2018 and the GPU is from 2020. The Ryzen 5 2600’s percentile of 75 among all CPUs indicates it is still a respectable processor, and the RTX 3060 Ti’s percentile of 59 among GPUs shows it is slightly above average. Together, they form a balanced system that performs as expected for their respective tiers. The fact that the combo ranks in the middle of the pack is consistent with the measured FPS, which are neither exceptional nor poor for the hardware.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: Based on the measured data, 1920x1080 and 2560x1440 are the best choices. At 1080p, Medium settings average 141 FPS, and at 1440p, Medium averages 95 FPS. Both stay well above 60 FPS, while 4K only manages 61 FPS at Low settings and 54 FPS at Medium.

Q: How does the Ryzen 5 2600 perform relative to its nearest CPU rivals?

A: The Ryzen 5 2600 has an average benchmark score of 21484, which is 0.2% lower than the Intel Core Ultra 5 228V, 0.5% lower than the Intel Core i9-11900H, 1.2% lower than the AMD EPYC 9454, and 0.7% higher than the Intel Xeon D-1746TER. These differences are minimal, showing it is competitive in general compute.

Q: Is the RTX 3060 Ti the bottleneck in this setup?

A: The data suggests yes. Frame rates drop significantly from 1080p to 4K at every settings level, which is a classic GPU-bound pattern. For example, at High settings, FPS falls from 96 at 1080p to 65 at 1440p to 37 at 4K. The CPU’s performance does not appear to limit the GPU in this game.

Q: What settings should I use for 1440p gaming?

A: Medium is the recommended preset at 2560x1440. It averages 95 FPS with a minimum of 81 FPS and a maximum of 109 FPS. Low is faster at 107 FPS, but the visual quality loss is not worth the 12 FPS gain. High drops to 65 FPS, and Ultra falls to 44 FPS.

Q: Can this combo handle 4K in Archeage?

A: Only at Low settings, where the average FPS is 61. Medium averages 54 FPS with a minimum of 46 FPS, which may stutter in crowded areas. High (37 FPS) and Ultra (25 FPS) are not playable. For a smooth 4K experience, a more powerful GPU would be needed.

Q: How does this combo rank among all tested combinations?

A: It ranks 1893 out of 3708 combos, placing it just past the midpoint. This is consistent with the hardware’s tier: the CPU is at the 75th percentile and the GPU at the 59th percentile, resulting in a balanced but not top-tier system.

Measured FPS Breakdown

The exact measured frame rates for each resolution and settings preset are as follows:

At 1920x1080, Low settings produce an average FPS of 149. Medium settings average 141 FPS, with a minimum of 120 FPS and a maximum of 162 FPS. High settings average 96 FPS. Ultra settings average 65 FPS.

At 2560x1440, Low settings average 107 FPS. Medium settings average 95 FPS, with a minimum of 81 FPS and a maximum of 109 FPS. High settings average 65 FPS. Ultra settings average 44 FPS.

At 3840x2160, Low settings average 61 FPS. Medium settings average 54 FPS, with a minimum of 46 FPS and a maximum of 63 FPS. High settings average 37 FPS. Ultra settings average 25 FPS.

These numbers show a clear hierarchy: Low is always the fastest, followed by Medium, High, and Ultra. The gaps between presets widen as resolution increases. At 1080p, the difference between Low and Ultra is 84 FPS (149 to 65). At 1440p, the gap is 63 FPS (107 to 44). At 4K, the gap is 36 FPS (61 to 25). This indicates that the GPU’s performance ceiling is reached sooner at higher resolutions, making preset choices more impactful at 4K.

The Medium preset stands out as the most balanced option across all resolutions, with only a modest FPS penalty compared to Low but a significant visual upgrade. At 1080p, Medium is only 8 FPS slower than Low, but at 1440p, the difference is 12 FPS, and at 4K, it is 7 FPS. The minimum FPS data for Medium (120 at 1080p, 81 at 1440p, 46 at 4K) shows that even in demanding scenes, the frame rate stays within a reasonable range at 1080p and 1440p, but dips below 60 at 4K.

The combination of the Ryzen 5 2600 and RTX 3060 Ti delivers playable performance at 1080p and 1440p across all settings, with Medium being the sweet spot. At 4K, only Low settings are viable, and even then, the margin above 60 FPS is thin. The data confirms that this is a capable 1080p/1440p gaming setup, but not a 4K machine. The combo’s mid-pack ranking of 1893 out of 3708 reflects this balanced but not exceptional performance profile.