Archeage

The AMD Ryzen 5 2600 and AMD Radeon RX 7700 combination occupies a specific niche in ArcheAge, with benchmark results showing a system that is heavily constrained by its processor in this MMORPG. The data indicates that this pairing is more capable at lower resolutions, but falls behind significantly when pushed to 4K Ultra settings, making it a mid-range performer in the overall combo rankings.

CPU Role

The AMD Ryzen 5 2600 serves as the central processing unit for this configuration, featuring 6 cores and 12 threads. Its base clock operates at 3.40 GHz with a boost clock reaching 3.90 GHz, built on the Zen architecture using a 12 nm process. This processor is from the 2000 series, and its benchmark scores place it in the 75th percentile among all CPUs, indicating a solid, if not top-tier, level of processing power.

For an MMORPG like ArcheAge, the CPU's role is often more critical than in other genres due to the need to process many on-screen entities, player actions, and game logic. The Ryzen 5 2600's multi-threaded performance, evidenced by a Passmark multithread score of 13160, is its primary strength. However, its single-thread score of 2239 is more modest, and this is where the system's limitations begin to show in the game's results.

The data shows that the CPU's influence is most pronounced at 1080p. Here, the measured FPS for Medium settings is 143, which is only 6 FPS less than the Low setting's 149 FPS. This small gap between Low and Medium suggests that the CPU is keeping up with the GPU's output at these lower graphical loads. However, the jump to Ultra at 1080p sees a dramatic drop to 67 FPS, a 76 FPS decrease from Medium. This significant fall suggests that while the CPU can handle the base game logic, the increased draw calls and effects of the Ultra preset begin to saturate its processing capacity.

The Ryzen 5 2600's performance relative to its rivals reinforces this interpretation. Its average benchmark score of 21484 is nearly identical to the Intel Core Ultra 5 228V, which scores 21440 with a deltaPct of 0.2%. It is also comparable to the Intel Core i9-11900H (21367, 0.5% delta) and the AMD EPYC 9454 (21223, 1.2% delta). This clustering near the 21400-21600 range indicates that the Ryzen 5 2600's overall compute capability is its defining trait, and it behaves as expected for a processor in this performance class. The data does not suggest that the CPU is a dramatic bottleneck, but rather that its limits are reached at higher settings, preventing the GPU from fully stretching its legs.

FAQ

Q: What is the average FPS at 1080p High settings?

A: The measured average FPS for the AMD Ryzen 5 2600 with the AMD Radeon RX 7700 at 1920x1080 with High settings is 98 FPS. This is a playable and smooth frame rate for the game.

Q: How does the 4K Ultra performance compare to 1080p Ultra?

A: The difference is substantial. At 1920x1080 with Ultra settings, the system achieves an average of 67 FPS. When the resolution is increased to 3840x2160 with Ultra settings, the average FPS drops to 26. This represents a 61% reduction in frame rate, indicating that 4K Ultra is not a viable setting for this combo.

Q: Is the CPU or GPU the main bottleneck in this system?

A: The data suggests the CPU is the primary limiting factor at higher settings, while the GPU becomes more stressed at higher resolutions. Evidence for the CPU bottleneck is the small 6 FPS difference between Low (149 FPS) and Medium (143 FPS) at 1080p, showing the CPU is already near its output limit. The larger drop from Medium to Ultra at 1080p (76 FPS) further supports this, as the CPU cannot handle the extra load. Conversely, at 4K, the massive drop from Low (62 FPS) to High (38 FPS) indicates the GPU is being overwhelmed by the resolution and graphical fidelity.

Q: What is the best resolution for this combo based on the data?

A: The data indicates that 1920x1080 is the most suitable resolution for this hardware pairing. All tested settings at 1080p, except for Ultra, produce average FPS above 98, which is a good target for a smooth experience. At 2560x1440, only the Low and Medium settings remain above 60 FPS, while at 3840x2160, even Low settings only manage 62 FPS.

Q: How does this combo rank against all other tested combos in ArcheAge?

A: This specific combination of AMD Ryzen 5 2600 and AMD Radeon RX 7700 ranks 1350 out of a total of 2761 tested combos in ArcheAge. This places it in the middle of the pack, indicating it is a moderate performer when compared to all other hardware pairings.

Q: What is the minimum FPS recorded for the 1440p Medium settings?

A: For the 2560x1440 resolution with Medium settings, the benchmark recorded a minimum FPS of 82 and a maximum FPS of 111, with an average of 97 FPS. This shows good frame time consistency for this particular configuration.

Resolution Scaling

The performance scaling from 1080p to 4K reveals a system that is balanced but with distinct limits. At Medium settings, the average FPS progression is 143 at 1920x1080, 97 at 2560x1440, and 55 at 3840x2160. This shows a predictable decline as resolution increases, with a 32% drop from 1080p to 1440p and a further 43% drop from 1440p to 4K. This pattern indicates that both the CPU and GPU are being taxed progressively, but the GPU's workload is growing at a faster rate as pixel count increases.

The situation is more telling when looking at the High settings. Here, the average FPS is 98 at 1080p, 66 at 1440p, and 38 at 4K. The drop from 1080p to 1440p is 32 FPS, and from 1440p to 4K is 28 FPS. This scaling suggests that the GPU is becoming the limiting component at higher resolutions, as the frame rate drops are more directly tied to the increased rendering load.

The Low settings data provides further insight into the CPU's role. At 1080p Low, the system achieves 149 FPS. At 1440p Low, it achieves 109 FPS, and at 4K Low, it achieves 62 FPS. The fact that 4K Low (62 FPS) only achieves roughly 42% of the 1080p Low performance (149 FPS) highlights the immense strain that 4K resolution places on the GPU. Even with minimal graphical effects, rendering over 8 million pixels is a massive task for the Radeon RX 7700, which is a mid-range card based on its 58th percentile ranking among all GPUs.

The Ultra settings exhibit the most dramatic scaling issues. The system goes from 67 FPS at 1080p to 45 FPS at 1440p, and finally to 26 FPS at 4K. The data shows that the transition from 1080p to 1440p Ultra results in a 22 FPS loss, while the transition to 4K Ultra results in a further 19 FPS loss. This indicates that the Ultra preset, which likely adds complex shaders and post-processing effects, is too demanding for this combo at any resolution above 1080p, with the CPU failing to keep up at 1080p and the GPU being overwhelmed at higher resolutions.

Settings Recommendations

Based on the measured FPS data, the optimal experience for this AMD Ryzen 5 2600 and AMD Radeon RX 7700 combination is found at 1920x1080 with Medium settings. This configuration delivers an average FPS of 143, with a minimum of 121 and a maximum of 164, providing a high and stable frame rate that is ideal for an MMORPG where smoothness is key. The performance is 45 FPS higher than the High setting at the same resolution, making Medium the clear choice for a fluid experience.

While the High setting at 1080p achieves a respectable 98 FPS, the jump to Medium provides a significant performance boost with what is likely a small visual trade-off. For players who prioritize frame rate over graphical fidelity, the Low setting at 1080p offers 149 FPS, but this is only 6 FPS more than Medium, making the Medium preset the better value in terms of performance per visual quality.

At 2560x1440, the Medium setting is the highest quality option that consistently maintains a high frame rate, with an average of 97 FPS and a minimum of 82 FPS. The High setting at this resolution drops to 66 FPS, which is still playable but less fluid. For 4K, the data suggests that this combo is not suited for high-quality gaming. Even at Low settings, the average FPS is only 62, and the Medium setting drops to 55 FPS. The Ultra setting at any resolution is not recommended, as it produces an average of 67 FPS at 1080p and a stutter-prone 26 FPS at 4K.

How This Combo Ranks

In the grand scheme of all tested hardware combinations for ArcheAge, the AMD Ryzen 5 2600 and AMD Radeon RX 7700 pairing sits at rank 1350 out of 2761 combos. This places it almost exactly in the middle of the pack, at the 48.9th percentile. This ranking is logical given the individual component standings. The CPU is in the 75th percentile of all CPUs, and the GPU is in the 58th percentile of all GPUs. However, their combined performance in this specific game, which is likely CPU-intensive, results in a more moderate overall ranking.

This mid-pack rank is a reflection of the system's balance. It is not a top-tier combo that can dominate at 4K, nor is it a low-end pairing that struggles at 1080p. Instead, it is a solid, dependable performer that offers good results at mainstream resolutions. The data shows that its 1080p performance is its strong suit, allowing it to compete effectively with other combos that may have more powerful GPUs but are held back by their CPUs.

The rank also highlights that there is significant room for improvement, as over 1400 other combos tested have achieved better overall performance in ArcheAge. This suggests that while this pairing is adequate for a pleasant gaming experience, it is not at the modern of performance. For a player looking for a high-refresh-rate 4K experience or maximum graphical fidelity, this combo would be found wanting. However, for a standard 1080p or 1440p gaming setup, it is a competent and capable choice.

Measured FPS Breakdown

The following data represents the exact measured FPS values for the AMD Ryzen 5 2600 and AMD Radeon RX 7700 combination in ArcheAge.

3840x2160 (4K)

• Ultra Settings: Average FPS of 26.
• High Settings: Average FPS of 38.
• Medium Settings: Average FPS of 55, with a minimum of 47 and a maximum of 64.
• Low Settings: Average FPS of 62.

2560x1440 (1440p)

• Ultra Settings: Average FPS of 45.
• High Settings: Average FPS of 66.
• Medium Settings: Average FPS of 97, with a minimum of 82 and a maximum of 111.
• Low Settings: Average FPS of 109.

1920x1080 (1080p)

• Ultra Settings: Average FPS of 67.
• High Settings: Average FPS of 98.
• Medium Settings: Average FPS of 143, with a minimum of 121 and a maximum of 164.
• Low Settings: Average FPS of 149.

These numbers show a clear hierarchy. The 1080p Medium setting is the performance sweet spot, offering a high average and a strong minimum frame rate. The 1440p Medium setting is also viable, but with a lower minimum. The 4K resolution is only playable at Low or Medium settings, and the Ultra preset is not a playable option at any resolution, with its highest average being 67 FPS at 1080p.