Archeage

FAQ

Q: What is the best resolution to play Archeage with the AMD Ryzen 5 2600 and NVIDIA GeForce GTX 1650?

A: The data shows 1920x1080 is the only resolution where the combo achieves playable frame rates, with an average of 61.9 FPS on Low settings and 34.3 FPS on High.

Q: How does the GTX 1650 compare to its nearest rivals in raw GPU performance?

A: The GTX 1650’s average benchmark score of 8713 sits nearly level with the NVIDIA GeForce RTX 3050 A Mobile (8746, -0.4% delta) and the AMD Radeon 550X (8749, -0.4% delta), while edging out the NVIDIA Quadro P2200 (8671, +0.5% delta).

Q: What is the CPU’s multithreaded capability relative to its closest competitors?

A: The Ryzen 5 2600 scores 11186 in Cinebench R23 multi-core, placing it within 1% of rivals like the Intel Core i5-1345U (19691 avg, -0.4% delta) and the AMD Ryzen 5 7530U (19508 avg, +0.6% delta) in overall average benchmark score.

Q: Does the GTX 1650’s VRAM capacity limit performance in Archeage?

A: The 4 GB GDDR5 memory with 128.1 GB/s bandwidth appears sufficient for the measured settings, as the frame rate scales predictably with resolution and preset rather than hitting a sudden VRAM wall.

Q: How does this combo rank among all tested combinations for Archeage?

A: This pairing ranks 1679 out of 1727 tested combos, placing it in the bottom 3% of all systems benchmarked for this game.

Q: Is the Ryzen 5 2600 more competitive in CPU-bound scenarios than the GPU is in graphics-bound ones?

A: The CPU holds a 77th percentile ranking among all processors, while the GPU sits at the 43rd percentile among all graphics cards, indicating the processor is comparatively stronger relative to its respective pool.

Settings Recommendations

The measured data clearly identifies 1920x1080 as the only viable resolution for this combination. At 4K, the frame rates fall to between 11.2 FPS (Ultra) and 23.1 FPS (Low), which is unplayable by any standard. At 2560x1440, even the Low preset only achieves 40.8 FPS, which is marginal for an MMORPG with dynamic combat.

The sweet spot is 1920x1080 with Medium settings, delivering 54.4 FPS average. This represents a balanced trade-off: it is only 7.5 FPS below the Low preset’s 61.9 FPS but provides noticeably better visual quality. High settings at 1080p drop to 34.3 FPS, which is playable but will feel less smooth during crowded raid encounters or large-scale PvP. Ultra at 1080p falls to 24.7 FPS, which is too choppy for reliable gameplay.

For players prioritizing smoothness above all, Low at 1080p yields the highest frame rate at 61.9 FPS, but the jump to Medium costs only 12% performance while likely offering substantially improved texture and shadow quality. Given that the game’s genre rewards consistent frame pacing, Medium at 1080p is the recommended preset for this hardware pairing.

GPU Role

The NVIDIA GeForce GTX 1650 is built on the Turing architecture with the TU117 chip, manufactured on a 12 nm process at TSMC. Its base clock of 1485 MHz boosts to 1665 MHz, with memory running at 2001 MHz (8 Gbps effective) across a 128-bit bus. This yields 128.1 GB/s of bandwidth, paired with 4 GB of GDDR5 memory.

The GPU’s raw compute capabilities include 896 shading units, 56 texture mapping units, and 32 raster output pipelines. Pixel rate is 53.28 GPixel/s, texture rate is 93.24 GTexel/s, and FP32 performance reaches 2.984 TFLOPS. These specifications place the GTX 1650 at the 43rd percentile among all GPUs, with an average benchmark score of 8713.

In Archeage specifically, the GPU becomes the primary bottleneck as resolution increases. At 1080p Low, the combo achieves 61.9 FPS, but dropping to 1440p Low yields 40.8 FPS, and 4K Low falls to 23.1 FPS. The scaling from Medium to High at each resolution shows a consistent 10-20% frame rate penalty, while Ultra exacts a severe toll, cutting frame rates nearly in half compared to High at every resolution. This suggests the GTX 1650’s 4 GB VRAM is adequate for the game’s texture demands, but the raw compute throughput limits performance at higher presets.

The GPU’s benchmark rivals include the GeForce RTX 3050 A Mobile (8746, -0.4% delta) and the Radeon 550X (8749, -0.4% delta), indicating the GTX 1650 is essentially performance-class-equivalent to those parts in synthetic tests.

How This Combo Ranks

This specific combination of AMD Ryzen 5 2600 and NVIDIA GeForce GTX 1650 ranks 1679 out of 1727 tested combos for Archeage, placing it in the bottom 3% of all systems benchmarked. This is a poor result, reflecting the GPU’s limited throughput at higher resolutions and presets.

The data suggests that the combo’s ranking is driven primarily by GPU limitations. At 1080p Low, the system achieves 61.9 FPS, which is playable but far from high-refresh territory. The 1440p results (26.3-40.8 FPS) and 4K results (11.2-23.1 FPS) are all below acceptable thresholds for an MMORPG where quick reaction times matter. Even the best-case 1080p Medium score of 54.4 FPS would rank poorly against combos with mid-range or high-end graphics cards.

The CPU’s percentile ranking of 77 suggests the Ryzen 5 2600 is a competent processor, but the GPU’s 43rd percentile ranking drags the overall combo down. In CPU-light scenes, the GTX 1650 will be the limiting factor; in crowded towns or large-scale battles, the CPU may also contribute to frame dips, but the measured averages indicate the GPU is the primary constraint. This is a combination that can run Archeage at 1080p with reduced settings, but it will not provide a smooth experience at higher resolutions or with maximum visual quality.

CPU Role

The AMD Ryzen 5 2600 is a 6-core, 12-thread processor based on the Zen+ architecture (Pinnacle Ridge), manufactured on GlobalFoundries’ 12 nm process. It runs at a base clock of 3.40 GHz with a boost clock of 3.90 GHz, drawing 65 W TDP. The CPU features 96 KB L1 cache per core, 512 KB L2 per core, and 16 MB of shared L3 cache. Memory support is dual-channel DDR4 with 46.9 GB/s bandwidth.

In synthetic benchmarks, the Ryzen 5 2600 scores 1127 in Cinebench R15 multi-core, 159 in single-core; 4698 in R20 multi-core, 663 single-core; and 11186 in R23 multi-core, 1579 single-core. Passmark results show a multithread score of 13160 and a single-thread score of 2239. The CPU holds a 77th percentile ranking among all processors, with an average benchmark score of 19616.

Relative to its nearest rivals, the Ryzen 5 2600 is essentially tied with the Intel Core i5-1345U (19691, -0.4% delta), the AMD Ryzen 5 7530U (19508, +0.6% delta), the Intel Core i5-11600KF (19740, -0.6% delta), and the Intel Core i7-10700F (19485, +0.7% delta). This indicates the CPU is competitive with modern mid-range parts despite being older.

In Archeage, the CPU’s role is secondary to the GPU at most settings, but its 12 threads help maintain frame pacing during complex scenes with many players and NPCs. The 16 MB L3 cache is beneficial for the game’s asset streaming, and the 65 W TDP means the processor won’t contribute excessive heat in a typical desktop build. The measured FPS data shows that at 1080p Low, the combo reaches 61.9 FPS, which likely represents a balance where the CPU can feed the GPU adequately; at higher resolutions, the GPU becomes the clear bottleneck, so CPU performance is less relevant to the observed frame rates.