Archeage
This combination provides smooth gameplay with an average of 91 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 31 | 43 | 68 | 78 |
| 1440p QHD | 54 | 80 | 116 | 132 |
| 1080p Full HD | 82 | 120 | 142 | 150 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 5 2600 + AMD Radeon RX 6800 XT, In-Depth Analysis
The AMD Ryzen 5 2600 paired with the AMD Radeon RX 6800 XT delivers a distinctive performance profile in Archeage, one that shifts dramatically depending on resolution and preset. The data indicates a system where the GPU’s raw capabilities are frequently held in check by the CPU’s older architecture, particularly at lower resolutions. This analysis breaks down the measured FPS, the combo’s standing against other tested configurations, and the practical implications for gameplay.
Resolution Scaling
The FPS drop from 1080p to 4K reveals the classic transition from a CPU-bound to a GPU-bound scenario. At 1080p with Low settings, the combo produces 149.8 FPS. Moving to 1440p Low drops that to 131.5 FPS, a 12.2% reduction. Pushing to 4K Low yields 78.1 FPS, which is a substantial 47.9% decrease from the 1080p figure. This steep decline at 4K indicates that the RX 6800 XT is finally being taxed heavily, with its pixel throughput becoming the limiting factor.
However, the scaling pattern under High settings tells a different story. At 1080p High, the system hits 120.4 FPS. At 1440p High, it still manages 80.3 FPS, a 33.3% drop. At 4K High, the average falls to 42.7 FPS. The relative drop from 1440p to 4K (46.8%) is far more severe than the drop from 1080p to 1440p (33.3%). This suggests that at 1080p and even 1440p High, the Ryzen 5 2600 is likely holding the GPU back; the GPU isn't the bottleneck until the resolution is high enough to saturate its rendering pipeline.
The gap between Low and Ultra presets at 4K is particularly telling. Low produces 78.1 FPS, while Ultra plummets to 30.9 FPS. This 60.4% performance penalty for the Ultra preset shows that the game’s higher-end visual effects impose a heavy cost on the GPU, even with its 16 GB of VRAM and high bandwidth. In contrast, the difference between Low and High at 1080p is only 19.6%, reinforcing that the CPU is the primary constraint at lower resolutions, where the GPU has ample headroom.
How This Combo Ranks
In the grand scheme of tested hardware combinations for Archeage, this pairing sits at rank 664 out of 1727 combos. This places it in the upper-middle tier of tested systems, indicating that it outperforms the majority of configurations but is not near the top. The CPU itself holds a 77th percentile ranking against all CPUs tracked in the benchmark database, while the GPU is in the 87th percentile against all GPUs. This disparity in component percentiles foreshadows the performance bottleneck observed in the resolution scaling data.
The Ryzen 5 2600’s nearest rivals in aggregate CPU benchmarks provide context for its overall capability. It scores nearly identically to the Intel Core i5-1345U, with a delta of -0.4%, and it is 0.6% ahead of the AMD Ryzen 5 7530U. It also trails the Intel Core i5-11600KF by 0.6% and leads the Intel Core i7-10700F by 0.7%. These are marginal differences, suggesting that in general compute tasks, the 2600 is competitive with these modern mobile and desktop chips, but its age shows in its lower single-threaded performance on older Zen architecture.
The GPU’s ranking is more favorable. The RX 6800 XT is only 0.5% behind the Intel Arc A550M and 1.9% ahead of the NVIDIA CMP 50HX. It trails the NVIDIA RTX A1000 by 1.7% but leads the NVIDIA GeForce RTX 4070 Ti SUPER by 2.6%. These small deltas indicate that the RX 6800 XT remains a high-performing card, even against newer releases, which makes the combo’s 664th rank more attributable to the CPU’s limitations than the GPU’s capabilities.
GPU Role
The AMD Radeon RX 6800 XT is a high-end card based on the RDNA 2.0 architecture, featuring 4608 shading units and 128 ROPs. It operates at a base clock of 1825 MHz with a game clock of 2015 MHz and a boost clock of 2250 MHz. The card is equipped with 16 GB of GDDR6 memory on a 256-bit bus, providing a substantial 512.0 GB/s of memory bandwidth. This configuration is well-suited for high-resolution texturing, but the data shows its utilization is inconsistent.
In Archeage, the GPU’s role is heavily modulated by the CPU. At 1080p Low, the system achieves 149.8 FPS, but this is likely where the GPU is waiting on the CPU to feed it draw calls. The GPU’s high pixel rate of 288.0 GPixel/s and texture rate of 648.0 GTexel/s are underutilized. As resolution increases to 4K, the GPU’s fillrate and memory bandwidth become more critical, and the FPS drops reflect the increased pixel workload. The fact that 4K Low (78.1 FPS) is more than double the 4K Ultra (30.9 FPS) demonstrates that the card’s compute units are capable of high throughput, but are hampered by the game’s demanding Ultra effects.
The GPU’s 87th percentile ranking against all GPUs is corroborated by its performance in Archeage at 4K, where it still delivers playable framerates on Low and Medium settings. However, the gap between the GPU’s potential and the actual in-game results at lower resolutions is a clear sign of a system imbalance. The 16 GB VRAM is not a limiting factor in this game at these settings, as the performance drops are more closely tied to compute and pixel throughput than memory capacity.
Measured FPS Breakdown
At 1920x1080, the combo delivers the following average FPS: Low at 149.8, Medium at 141.7, High at 120.4, and Ultra at 82.3. The progression from Low to Ultra shows a 45.1% performance loss, with the largest single drop occurring between High and Ultra (31.6%). This suggests that the Ultra preset introduces effects that are particularly taxing on the CPU’s ability to submit rendering commands, as the GPU is unlikely to be saturated at 1080p.
Moving to 2560x1440, the averages are: Low at 131.5, Medium at 115.5, High at 80.3, and Ultra at 53.6. The drop from High to Ultra is 33.2%, again the largest step. Interestingly, the difference between Low and Medium at 1440p is only 12.2%, whereas the gap between Medium and High is 30.5%. This indicates that the High preset’s additional shadow and draw-distance effects have a disproportionate impact on performance at this resolution.
At 3840x2160, the scores are: Low at 78.1, Medium at 67.8, High at 42.7, and Ultra at 30.9. The scaling here is more linear, with a 13.2% drop from Low to Medium, a 37.0% drop from Medium to High, and a 27.6% drop from High to Ultra. This pattern is typical of a GPU-bound scenario, where each incremental increase in settings adds a more consistent load on the graphics processor. The 4K Ultra result of 30.9 FPS is the only sub-30 FPS average in the entire dataset, marking it as the least playable configuration tested.
FAQ
Q: Is this combo better suited for 1080p or 4K gaming in Archeage?
A: The data clearly shows a CPU bottleneck at 1080p, with a maximum of 149.8 FPS on Low. At 4K, the GPU becomes the limiting factor, as evidenced by the 78.1 FPS on Low. The system is more balanced at 1440p, where it achieves 131.5 FPS on Low and 80.3 FPS on High.
Q: How does the Ryzen 5 2600 compare to its closest rivals in aggregate performance?
A: The Ryzen 5 2600 is statistically tied with the Intel Core i5-1345U, trailing it by just 0.4%. It is 0.6% ahead of the AMD Ryzen 5 7530U and 0.7% ahead of the Intel Core i7-10700F. It trails the Intel Core i5-11600KF by 0.6%.
Q: What is the largest performance gap between settings at a single resolution?
A: At 4K, the gap between Low (78.1 FPS) and Ultra (30.9 FPS) is the largest, representing a 60.4% reduction in average FPS. This indicates the Ultra preset is exceptionally demanding on the GPU at this resolution.
Q: Does the RX 6800 XT perform better than the NVIDIA GeForce RTX 4070 Ti SUPER based on aggregate scores?
A: Yes, the RX 6800 XT has an average benchmark score of 49982, which is 2.6% higher than the RTX 4070 Ti SUPER’s score of 48704. The RX 6800 XT also ranks in the 87th percentile versus all GPUs.
Q: What is the combo’s overall rank among tested systems in Archeage?
A: The combo ranks 664th out of 1727 tested combinations. This places it in the top 38.5% of all tested systems, indicating a solid but not top-tier performance.
Q: At which resolution and settings does the FPS finally drop below 60?
A: The 60 FPS threshold is crossed at 1440p with Ultra settings, which produces 53.6 FPS. At 4K, the High (42.7 FPS) and Ultra (30.9 FPS) presets also fall below 60 FPS, while 4K Low and Medium remain above.
Settings Recommendations
For players targeting 60 FPS or higher, the data suggests avoiding the Ultra preset entirely. At 1080p, all presets except Ultra exceed 82 FPS, making High the optimal choice for balancing visual fidelity with performance. At 1440p, the Low and Medium presets are the only options that comfortably exceed 60 FPS, with High at 80.3 FPS being borderline playable. At 4K, only the Low preset (78.1 FPS) provides a comfortable margin above 60 FPS; Medium at 67.8 FPS is acceptable, but High and Ultra are not viable for smooth gameplay.
The most balanced experience appears to be at 1440p with the High preset, yielding 80.3 FPS. This resolution allows the GPU to stretch its legs without the CPU becoming a severe bottleneck, and the High preset offers improved visual quality over Low and Medium without the extreme cost of Ultra. For users prioritizing maximum visual quality, 1080p Ultra at 82.3 FPS is the only Ultra setting that remains playable, as it leverages the CPU’s higher clock headroom at lower resolutions. The 4K Ultra setting at 30.9 FPS is only suitable for screenshots or scenarios where frame rate is not a priority.
Hardware Specifications
AMD Ryzen 5 2600
AMD Radeon RX 6800 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 2600 + AMD Radeon RX 6800 XT in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 78.1 |
| 3840x2160 | Medium | 67.8 |
| 3840x2160 | High | 42.7 |
| 3840x2160 | Ultra | 30.9 |
| 2560x1440 | Low | 131.5 |
| 2560x1440 | Medium | 115.5 |
| 2560x1440 | High | 80.3 |
| 2560x1440 | Ultra | 53.6 |
| 1920x1080 | Low | 149.8 |
| 1920x1080 | Medium | 141.7 |
| 1920x1080 | High | 120.4 |
| 1920x1080 | Ultra | 82.3 |
Archeage with Ryzen 5 2600 + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RX 6800 XT + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 5 2600 + RX 6800 XT
Explore FPS benchmarks for other games using this same hardware combination.