Valorant

The Intel Core i5-14600KF paired with the NVIDIA GeForce RTX 2060 lands at rank 1216 out of 1650 tested combos in Valorant. This places the combination in the lower-middle tier of the database, meaning that while it clears the bar for playable performance, a significant portion of the tested hardware pool delivers higher frame rates. The ranking reflects a system where the GPU, an older Turing-generation part, is the primary constraint in a game that is notoriously light on graphics demands.

How This Combo Ranks

The combo’s position at 1216 out of 1650 is a direct consequence of the RTX 2060’s age and tier. The data shows that Valorant’s frame rates are exceptionally high across the board, so the ranking is less about hitting a playable threshold and more about how far beyond that threshold a system can push. The i5-14600KF is a modern, high-performance CPU, but the GPU’s 58th percentile standing among all GPUs holds the pairing back. In a title where even modest hardware can produce triple-digit FPS, the 2060’s compute and memory throughput become the bottleneck, preventing the combo from competing with systems using newer or higher-end graphics cards. The result is a rank that is respectable but not competitive with the top tier of the database.

GPU Role

The NVIDIA GeForce RTX 2060 is built on the Turing architecture with a 12 nm process node and houses 1920 shading units. Its memory configuration consists of 6 GB of GDDR6 on a 192-bit bus, delivering 336.0 GB/s of bandwidth. The core clocks are listed at 1365 MHz base and 1680 MHz boost. These specifications place the GPU at the 58th percentile against all GPUs, with an average benchmark score of 16074. Its nearest rival, the AMD Radeon RX 7600S, scores 15996, a marginal 0.5% difference, while the AMD Radeon Pro 5700 is 1.7% ahead. In Valorant, the GPU’s role is to render the relatively simple scenes at high speed. The 6 GB VRAM is not a limiting factor at the tested settings, as the game’s texture and geometry loads are modest. The boost clock of 1680 MHz is the relevant figure for sustained performance, and the data suggests it is sufficient to push frame rates into the hundreds, but the GPU’s overall compute throughput caps the upper ceiling of performance.

CPU Role

The Intel Core i5-14600KF is a 14-core, 20-thread processor from the Raptor Lake architecture, using a 10 nm process. It operates with a base clock of 3.50 GHz and a boost clock of 5.30 GHz. The cache hierarchy includes 80 KB of L1 per core, 2 MB of L2 per core, and a shared 24 MB of L3. This CPU sits in the 93rd percentile against all CPUs, with an average benchmark score of 49367. Its closest rival in aggregate performance is the Intel Core i5-14600K, which has a delta of just 0.4%, while the AMD Ryzen 9 5950X is 0.6% behind. In Valorant, the CPU is responsible for game logic, player positions, and network tick processing. The high boost clock of 5.30 GHz is particularly valuable for this game, which relies heavily on single-thread performance. The benchmark results show that the CPU is more than capable of feeding frames to the GPU, and in many of the measured scenarios, it is likely that the CPU is not the limiting factor, especially at lower resolutions.

Measured FPS Breakdown

The measured FPS data reveals a clear pattern across resolutions and settings. At 1920x1080, the lowest tested resolution, the average frame rates are exceptionally high. With Low settings, the combo achieves 542.4 FPS, which is the highest recorded figure for this pairing. Medium settings drop this to 356.6 FPS, High settings to 339.3 FPS, and Ultra to 323.4 FPS. The drop from Low to Medium is substantial, indicating a significant increase in GPU load, but the subsequent drops from Medium to High and High to Ultra are more gradual. Moving to 2560x1440, the frame rates remain high but show a clear reduction. Low settings deliver 463.1 FPS, while Medium, High, and Ultra produce 305, 289.8, and 275.2 FPS, respectively. The gap between Low and Medium settings at this resolution is again the largest single-step change. At 3840x2160, the highest resolution, the pattern continues. Low settings yield 367.6 FPS, Medium produces 242.4 FPS, and High and Ultra fall to 231.2 and 218.6 FPS. The data shows that the RTX 2060 can maintain triple-digit frame rates even at 4K, but the margin between Low and higher settings narrows as resolution increases, suggesting the GPU is becoming more heavily utilized.

Resolution Scaling

The scaling from 1080p to 4K is telling. At 1080p Low, the system produces 542.4 FPS. Moving to 1440p Low, the frame rate drops to 463.1 FPS, a reduction of approximately 14.6%. At 4K Low, the frame rate is 367.6 FPS, which is a 32.2% drop from the 1440p figure and a 32.2% drop from 1080p. This scaling indicates that the GPU is becoming the limiting factor as pixel count increases. The RTX 2060’s 336.0 GB/s of memory bandwidth and 6.451 TFLOPS of FP32 compute are being taxed more heavily at higher resolutions. In contrast, the CPU’s performance headroom is evident at 1080p, where the frame rates are so high that the GPU is likely the primary bottleneck even at Low settings. The pattern is consistent across all settings: the percentage drop from 1080p to 1440p is larger than the drop from 1440p to 4K for Low settings, but for High and Ultra settings, the drops are more uniform. This suggests that at higher settings, the GPU is already near its limit at 1440p, and the move to 4K adds less relative pressure. The data confirms that for this combo, the RTX 2060 is the component that determines the upper bound of performance, while the i5-14600KF provides ample headroom to avoid becoming a constraint.