To The Core
This combination delivers exceptional performance with an average of 181 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 76 | 94 | 109 | 128 |
| 1440p QHD | 132 | 165 | 190 | 225 |
| 1080p Full HD | 197 | 245 | 282 | 334 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
To The Core with AMD Ryzen 9 9950X3D + NVIDIA GeForce RTX 5060, In-Depth Analysis
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The measured FPS rows for “To The Core” reveal a steep but predictable scaling curve as resolution climbs. At 1920x1080 with Low settings, the combo delivers 334 avg FPS, dropping to 128 avg FPS at 3840x2160 Low — a 62% reduction. This is a dramatic fall, but it is not uniform across settings. The High preset scales from 245 avg FPS at 1080p to 94 avg FPS at 4K, a 62% drop as well, while Ultra falls from 197 avg FPS at 1080p to 76 avg FPS at 4K, a 61% decline. Medium is the outlier: 282 avg FPS at 1080p, 190 at 1440p, and 109 at 4K, representing a 61% decrease from 1080p to 4K.
The consistency of these drops — hovering around 61-62% regardless of preset — strongly suggests the GPU is the dominant limiting factor across all tested resolutions. If the CPU were the bottleneck, the scaling from 1080p to 1440p would show a smaller FPS decline (since the CPU workload is largely resolution-independent), and the 4K drop would be more pronounced. Instead, the data shows a nearly linear relationship: each doubling of pixel count (1080p to 4K is 4x the pixels) reduces FPS by roughly a factor of 2.5, not 4. This is typical of a GPU-bound scenario where the RTX 5060’s 8 GB GDDR7 memory and 448.0 GB/s bandwidth are sufficient to keep up with the game’s demands, but the GPU’s compute throughput (19.18 TFLOPS FP32) becomes the ceiling.
The Medium preset at 4K shows a min FPS of 92 and max of 125, a 33 FPS spread. At 1440p Medium, that spread is 57 FPS (161 to 218), and at 1080p Medium it’s 85 FPS (240 to 325). This widening spread as resolution decreases points to CPU involvement — the frame time variance grows when the GPU is less loaded, exposing CPU scheduling inconsistencies. Still, the average FPS at 1080p Low (334) is likely near the engine’s refresh cap, so the CPU is not the primary constraint in this title; the data indicates a GPU-first bottleneck.
The game’s idle genre may also explain why the scaling is so clean — idle games often have simpler scenes with fewer draw calls, meaning the GPU’s fill-rate and memory bandwidth become the deciding factors. The RTX 5060’s 119.9 GPixel/s pixel rate and 299.6 GTexel/s texture rate are the relevant specs here, and the FPS drops align with pixel-count increases, not with CPU thread scaling. Thus, for “To The Core,” the resolution data is a textbook case of GPU-limited scaling.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 9 9950X3D is a 16-core, 32-thread processor with a base clock of 4.30 GHz and a boost clock of 5.70 GHz, built on the Zen 5 architecture with a 4 nm process. Its benchmark scores are exceptional: a 3dmark single-thread score of 1292, a 3dmark 2-thread score of 2549, and a 3dmark 16-thread score of 16374. The passmark multithread score is 70255, and the geekbench multicore is 26736. The CPU’s percentileVsAllCpus is 95, placing it in the top 5% of all CPUs.
Given that “To The Core” is an idle game, the CPU’s role is likely more about background simulation and logic than rendering. The game’s FPS at 1080p Low (334) suggests the CPU can easily drive high frame rates, but the data shows that the CPU is not the limiting factor — if it were, we’d see a plateau across resolutions. Instead, the FPS scales with resolution, so the CPU headroom is ample. The 16 cores and 32 threads are far beyond what an idle game would need; even 8 threads (3dmark 8-thread score 9260) would suffice, but the 9950X3D provides massive multi-threaded capacity for background tasks.
The cache hierarchy also matters: 80 KB L1 per core, 1 MB L2 per core, and 128 MB L3. For an idle game, the L3 cache is likely large enough to hold the entire game state, reducing memory latency. The CPU’s memory bandwidth of 89.6 GB/s (dual-channel DDR5) is high, but again, the game’s FPS scaling is GPU-bound, so these CPU features are overkill.
What’s more relevant is the CPU’s boost clock behavior. The 5.70 GHz boost clock, paired with 32 threads, means the processor can handle any sudden spike in game logic — like rendering a large idle screen with many on-screen elements. The 3DMark max-threads score of 17184 confirms multicore scaling, but the game’s FPS does not show CPU-bound dips at lower resolutions (334 FPS at 1080p Low is very high, but that’s still likely GPU-limited). The idle genre typically has low per-frame CPU cost, so the CPU is not stressed.
Compared to rivals, the data shows the 9950X3D is barely ahead of the AMD Ryzen 7 PRO 9755 (deltaPct 0.1) and the AMD Ryzen 7 PRO 9755X3D (deltaPct 0.1). This suggests that in this game, the CPU’s core count and clock speed provide no meaningful advantage — the game simply doesn’t use them. The Intel Core Ultra 9 285 is 0.4% behind, so the CPU ranking is essentially a tie. Thus, the CPU role in “To The Core” is to provide a high single-thread baseline and massive cache, but the game’s bottleneck is elsewhere.
Settings Recommendations — which preset gives the best experience per the measured rows
The measured FPS data at each resolution and preset allows a clear recommendation. At 1080p, Low yields 334 avg FPS, Medium 282, High 245, and Ultra 197. The jump from Low to Medium is a 52 FPS drop (16%), while Medium to High is 37 FPS (13%), and High to Ultra is 48 FPS (20%). For a smooth experience, 1080p Medium is the sweet spot: it offers 282 avg FPS, which is far above the 60 FPS threshold, and the visual uplift from Low to Medium is likely noticeable. Ultra at 1080p is still playable at 197, but the frame loss is not justified given that Medium is already 282.
At 1440p, Low gives 225, Medium 190, High 165, and Ultra 132. The drop from Low to Medium is 35 FPS (16%), Medium to High is 25 FPS (13%), and High to Ultra is 33 FPS (20%). Here, Medium is the best balance: 190 avg FPS is far above the 60 FPS line, and the difference between Medium and High is only 25 FPS, which might be acceptable for better visuals. However, if you prioritize frame rate, Low at 225 is the choice.
At 4K, Low yields 128, Medium 109, High 95, and Ultra 76. The drop from Low to Medium is 19 FPS (15%), Medium to High is 14 FPS (13%), and High to Ultra is 19 FPS (18%). At this resolution, the GPU is clearly the limit — 76 FPS at Ultra is still decent, but the 4K Ultra row has no measured min/max, suggesting it might be unstable. The best experience per the data is 4K Medium at 109 avg FPS (min 92, max 125), which is above the 60 FPS threshold and provides a stable frame window. The 4K Low at 128 is also good, but Medium adds visual quality for a 19 FPS loss.
The data suggests that the Ultra preset is not a good choice at any resolution — it consistently delivers 18-20% lower FPS than High, and the visual gain in an idle game is likely minimal. The Medium preset is the most balanced, providing a stable frame rate across all resolutions (282, 190, 109) with a min FPS above 60 at 1080p and above 90 at 4K. For the best experience, run Medium at 1440p — that gives 190 avg FPS with a 161-218 FPS range, which is both smooth and visually detailed.
How This Combo Ranks — use comboRankInGame vs other tested combos
The AMD Ryzen 9 9950X3D + NVIDIA GeForce RTX 5060 combination ranks 1639 out of 3725 tested combos in “To The Core”. This places it in the 56th percentile (1639/3725 ≈ 0.44, but the rank is from the top, so it’s above average). The data is measured, not estimated. This rank is surprisingly low for a top-tier CPU paired with a mid-range GPU, but it aligns with the game’s characteristics — an idle game that is GPU-bound at higher resolutions and does not utilize the CPU’s 16 cores.
Compared to other combos, the GPU’s percentileVsAllGpus is 72, meaning the RTX 5060 is better than 72% of all GPUs, but the CPU is in the 95th percentile. The combo rank of 1639 out of 3725 suggests that many other combos with weaker CPUs but stronger GPUs (like a more powerful GPU) would rank higher because the game is GPU-bound. The 56th percentile rank is modest; superior combos would be those with a higher-tier GPU, such as an RTX 5070 or above, which would push FPS higher at 4K.
The data shows that the CPU’s high benchmark scores (avgBenchmarkScore 75779, percentile 95) do not translate into high in-game ranking because the game doesn’t use them. The GPU’s avgBenchmarkScore is 26331, percentile 72, and its nearest rivals are the AMD Radeon 860M (deltaPct -0.3) and the NVIDIA GeForce MX550 (deltaPct -0.3), meaning the RTX 5060 is just barely above those GPUs in general benchmarks. In-game, this combo’s rank is affected by the fact that the RTX 5060 is not a high-tier GPU, so the 56th percentile is actually a fair representation of its gaming performance in a GPU-bound game.
The rank also means that over 2090 combos (3725 - 1639) perform better in this game. This is expected for a lower-mid-tier GPU. The combo’s 4K Ultra FPS of 76 is above the 60 FPS threshold, so it’s playable, but better combos would achieve higher FPS. The key takeaway is that for “To The Core”, the CPU choice is irrelevant — the GPU determines rank, and the RTX 5060 is a 72nd percentile GPU.
FAQ
Q: What is the frame rate at 1080p with Low settings for this combo?
A: At 1920x1080 with Low settings, the combo averages 334 FPS.
Q: How does the combo rank in-game?
A: It ranks 1639 out of 3725 tested combos, placing it in the 56th percentile.
Q: At which resolution is the CPU the bottleneck?
A: The FPS scales with resolution (e.g., 334 to 128 FPS from 1080p to 4K), so the CPU is not the bottleneck; the GPU is.
Q: What is the highest FPS measured with a min FPS above 60?
A: At 4K Medium, the combo has an average of 109 FPS with a min of 92 and max of 125, which is above 60 FPS.
Q: How does the GPU compare to its nearest rival?
A: The RTX 5060 is 0.3% slower than the AMD Radeon 860M, and 0.3% slower than the NVIDIA GeForce MX550 (deltaPct -0.3).
Q: What is the difference in FPS between 1080p and 4K at Low settings?
A: It drops from 334 FPS at 1080p to 128 FPS at 4K, a 62% reduction.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
The measured FPS data is as follows:
1920x1080 (1080p)
- Low: 334 avg FPS
- Medium: 282 avg FPS (min 240, max 325)
- High: 245 avg FPS
- Ultra: 197 avg FPS
2560x1440 (1440p)
- Low: 225 avg FPS
- Medium: 190 avg FPS (min 161, max 218)
- High: 165 avg FPS
- Ultra: 132 avg FPS
3840x2160 (4K)
- Low: 128 avg FPS
- Medium: 109 avg FPS (min 92, max 125)
- High: 94 avg FPS
- Ultra: 76 avg FPS
The data shows that only the Medium settings at each resolution have measured min/max FPS values, indicating potential frame times. For example, at 1080p Medium, the min FPS is 240 and max is 325, a spread of 85 FPS. At 1440p Medium, min 161, max 218 (spread 57), and at 4K Medium, min 92, max 125 (spread 33). This suggests that the Medium preset is the one with sufficient frame time stability to measure, while the others may be below or above the measurement threshold. The FPS drops from Low to Ultra are consistent: at 1080p, the drop from Low to Ultra is 137 FPS (334 to 197, a 41% drop), at 1440p it’s 93 FPS (225 to 132, 41%), and at 4K it’s 52 FPS (128 to 76, 41%). So the percentage drop is identical across resolutions, reinforcing the GPU-bound nature.
The max FPS at 1080p Medium is 325, which is close to the Low FPS of 334 — meaning that Medium at 1080p can sometimes hit the same max frame rate as Low, but the average is 52 FPS lower. At 4K Medium, the max FPS is 125, which is 3 FPS lower than Low’s 128, but the average is 19 FPS lower. These numbers show that the Medium preset is a reasonable compromise.
GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce RTX 5060 has 8 GB of GDDR7 memory on a 128-bit bus, with a memory bandwidth of 448.0 GB/s. The GPU’s base clock is 2280 MHz, boost clock 2497 MHz, and the memory clock is 1750 MHz (28 Gbps effective). The GPU has 3840 shading units, 120 TMUs, 48 ROPs, 30 RT cores, and 120 tensor cores. The pixel rate is 119.9 GPixel/s, texture rate 299.6 GTexel/s, and FP32 performance is 19.18 TFLOPS. The GPU’s TDP is 145 W, and it uses a 300 W suggested PSU.
In “To The Core”, the GPU’s role is critical. The FPS scaling from 1080p to 4K is directly tied to the GPU’s compute and memory throughput. The 8 GB VRAM is sufficient for this idle game, as the game likely doesn’t need more than 8 GB at 4K. The memory bandwidth of 448.0 GB/s is adequate for high-resolution textures, but the game’s idle nature means that the GPU is not stressed by complex effects. The GPU’s percentile is 72, indicating it is above average, but not top-tier.
The GPU’s nearest rival is the AMD Radeon 860M, which is 0.3% faster, and the NVIDIA GeForce MX550, which is also 0.3% faster. The AMD Radeon RX 5700 XT 50th Anniversary is 0.8% faster, and the AMD Radeon RX 6750 XT is 1.2% slower. These small deltas show that the RTX 5060 is in a tight performance cluster, but in this game, it is enough to drive 4K at playable framerates.
The GPU’s clocks are not high compared to top-tier cards, but the 5 nm process and 21,900 million transistors on a 181 mm² die suggest a dense design. The 19.18 TFLOPS FP32 is the key spec — the game’s rendering pipeline likely uses this, and the FPS drops are consistent with the GPU’s compute scaling. For example, the 4K Ultra FPS (76) is 23% lower than 4K Low (128), which aligns with the compute load of Ultra settings. The GPU’s VRAM is not a factor, as the game doesn’t use it fully, but the GPU’s texture rate (299.6 GTexel/s) may limit frame rates at 4K.
The GPU’s role is the primary bottleneck. The 8 GB VRAM is fine, the 128-bit bus is a limiting factor (448 GB/s is moderate), but the FPS data shows that the GPU’s compute is the main constraint. The GPU’s 72nd percentile is a fair ranking, but in this game, it’s enough for a playable experience at 4K, which is the highest resolution measured.
The comparison to the CPU shows that the GPU is the limiting component, and the combo’s rank is due to the GPU’s mid-range position. The CPU’s high percentile (95) is irrelevant, as the game’s FPS is not CPU-bound.
Hardware Specifications
AMD Ryzen 9 9950X3D
NVIDIA GeForce RTX 5060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 9950X3D + NVIDIA GeForce RTX 5060 in To The Core
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 128.0 |
| 3840x2160 | Medium | 109.0 |
| 3840x2160 | High | 94.0 |
| 3840x2160 | Ultra | 76.0 |
| 2560x1440 | Low | 225.0 |
| 2560x1440 | Medium | 190.0 |
| 2560x1440 | High | 165.0 |
| 2560x1440 | Ultra | 132.0 |
| 1920x1080 | Low | 334.0 |
| 1920x1080 | Medium | 282.0 |
| 1920x1080 | High | 245.0 |
| 1920x1080 | Ultra | 197.0 |
To The Core with Ryzen 9 9950X3D + Other GPUs
See how To The Core performs with the same CPU but different graphics cards.
To The Core with RTX 5060 + Other CPUs
See how To The Core performs with the same GPU but different processors.
Other Games with Ryzen 9 9950X3D + RTX 5060
Explore FPS benchmarks for other games using this same hardware combination.