To The Core
This combination delivers exceptional performance with an average of 225 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 94 | 117 | 135 | 159 |
| 1440p QHD | 164 | 204 | 235 | 278 |
| 1080p Full HD | 244 | 303 | 350 | 414 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
To The Core with AMD Ryzen 9 9950X3D + NVIDIA GeForce RTX 3080, In-Depth Analysis
The AMD Ryzen 9 9950X3D paired with the NVIDIA GeForce RTX 3080 delivers an exceptionally smooth experience in To The Core, an idle game that clearly favors high-frequency CPU performance. Benchmark results show this combination never drops below 94 FPS even at 4K Ultra settings, and at 1080p it reaches over 400 FPS on Low settings, indicating the pairing is more than sufficient for the game’s demands.
FAQ
Q: How does the Ryzen 9 9950X3D perform relative to its closest CPU rivals?
A: The Ryzen 9 9950X3D has an average benchmark score of 75,779, which is 0.1% higher than both the AMD Ryzen 7 PRO 9755 and the AMD Ryzen 7 PRO 9755X3D (scores of 75,738 and 75,716 respectively). It also edges out the AMD EPYC 8224P by 0.3% and the Intel Core Ultra 9 285 by 0.4%, placing it in the 95th percentile among all tested CPUs.
Q: How does the RTX 3080’s performance compare to its nearest GPU competitors?
A: The RTX 3080’s average benchmark score is 23,172, which is 0.3% lower than the NVIDIA P106-100 (23,249) and the AMD Radeon Pro Vega 16 (23,250). It also trails the AMD Radeon RX 6600M by 0.4% and the AMD Radeon R9 M290X by 0.4%, ranking in the 68th percentile of all GPUs.
*Q: What is the best FPS result achieved by this combo in To the Core?*
A: The highest average FPS recorded is 414, achieved at 1920x1080 resolution with Low settings. The minimum FPS for that setting is not listed, but the next highest is 350 FPS at Medium settings, where the minimum is 297 and maximum is 402.
Q: What is the lowest FPS performance observed?
A: The lowest average FPS is 94, which occurs at 3840x2160 resolution with Ultra settings. The only other sub-100 FPS result is the 4K High setting at 117 FPS, so the game remains quite fluid even at the most demanding preset.
Q: How does this combo rank among all tested configurations in this game?
A: This combo ranks 1,049 out of 3,725 tested combinations. That places it in the top 28% of all systems, which is a strong result given the game’s relatively light load and the high refresh rates achievable.
Q: Is the data measured or estimated?
A: The data is measured, meaning the FPS values come from actual testing rather than projections. This makes the results reliable for assessing real-world performance of this specific CPU and GPU pairing.
CPU Role
The Ryzen 9 9950X3D is a 16-core, 32-thread processor from AMD’s 9000 series, built on the Zen 5 architecture and codenamed Granite Ridge. It uses a 4nm process from TSMC and has a base clock of 4.30 GHz and a boost clock of 5.70 GHz. The chip features a large 128 MB L3 cache, alongside 80 KB of L1 and 1 MB of L2 per core, which provides high-speed data access for workloads that benefit from cached data.
In To the Core, the CPU is clearly not a limiting factor. The game’s idle genre places minimal demand on multi-threaded processing, and benchmark results confirm this: even at 4K Ultra, the FPS is 94, while at 1080p Low it reaches 414. The single-thread performance of this CPU is strong, with a Geekbench single-core score of 3,064 and a Cinebench R23 single-core score of 2,259. This high per-core capability ensures that even the most frame-rate-sensitive scenarios, such as 1080p Low, are handled with ease.
The CPU’s 32 threads and 16 cores are largely underutilized in this game, but the high boost clock ensures that the few threads that are used run at maximum speed. The 3DMark single-thread score of 1,292 and the 2-thread score of 2,549 suggest that the processor’s ability to handle a small number of threads efficiently is what matters most here. The multi-core scores, while impressive (a Cinebench R23 multi-core score of 42,018 and a Geekbench multi-core score of 26,736), are not directly relevant to the game’s performance, which is why the FPS remains high across all settings.
GPU Role
The NVIDIA GeForce RTX 3080 is an Ampere-architecture GPU based on the GA102 chip, fabricated on Samsung’s 8nm process. It has 8,704 shading units, 272 texture mapping units, and 96 ROPs, along with 68 RT cores and 272 tensor cores. The GPU runs at a base clock of 1440 MHz and boosts to 1710 MHz, with 10 GB of GDDR6X memory on a 320-bit bus, delivering 760.3 GB/s of bandwidth. Its FP32 performance is 29.77 TFLOPS.
In To the Core, the GPU is the primary bottleneck at higher resolutions, but it still delivers excellent results. At 4K Ultra, the average FPS is 94, which is below the 100 FPS mark, but the 4K High setting yields 117 FPS, and 4K Low reaches 159 FPS. The GPU’s memory bandwidth of 760.3 GB/s is likely sufficient for the game’s textures, as the FPS does not drop drastically when moving from 1080p to 4K—the scaling is moderate rather than catastrophic.
The RTX 3080’s 10 GB of VRAM is not a concern in this title, as the game’s idle nature does not require massive texture memory. The GPU’s 3DMark Steel Nomad DX12 score of 4,407 and Passmark G3D score of 25,086 indicate it has solid overall performance. However, the GPU’s percentile of 68 versus the CPU’s 95 shows that the CPU is the more dominant component in this pairing, and the FPS results reflect that the GPU is still capable of high frame rates even when paired with a top-tier processor.
Measured FPS Breakdown
At 1920x1080, the RTX 3080 and Ryzen 9 9950X3D combination delivers outstanding frame rates. With Low settings, the average FPS is 414. Moving to Medium, the average drops to 350 FPS, with a minimum of 297 and a maximum of 402. High settings produce an average of 303 FPS, while Ultra settings still deliver a very high 244 FPS. These numbers show that even at the highest preset, the frame rate is well above the refresh rate of any monitor, making the game feel incredibly smooth.
At 2560x1440, the performance remains impressive. Low settings yield an average of 278 FPS, while Medium produces 235 FPS, with a minimum of 200 and maximum of 271. High settings average 204 FPS, and Ultra settings drop to 164 FPS. The scaling from 1080p to 1440p shows a reduction of roughly 25-35% in FPS, which is expected as the number of pixels increases, but the frame rates are still high enough for a 144Hz or even 240Hz monitor.
At 3840x2160, the performance is still strong but begins to show the GPU’s limits. Low settings average 159 FPS, Medium drops to 135 FPS (with a minimum of 114 and maximum of 155), and High falls to 117 FPS. Ultra settings bring the average down to 94 FPS, which is the lowest result in the dataset. The drop from 1080p to 4K is significant, but the game remains playable at all settings, with even the Ultra preset hitting nearly 100 FPS.
Resolution Scaling
The FPS scaling from 1080p to 4K reveals a pattern consistent with a GPU-bound workload. At Low settings, the FPS drops from 414 at 1080p to 159 at 4K, a reduction of 62%. At Medium settings, the drop is from 350 to 135, a 61% reduction. High settings see a drop from 303 to 117, a 61% reduction, and Ultra settings drop from 244 to 94, a 61% reduction. This consistent ~61% decrease in FPS as resolution increases from 1080p to 4K indicates that the GPU is the primary limiting factor at higher resolutions, as the CPU’s performance remains constant.
The scaling is almost uniform across all settings, which suggests that the game’s rendering is heavily pixel-bound. The RTX 3080’s 760.3 GB/s memory bandwidth is sufficient to handle the increased pixel throughput, but the raw compute power (29.77 TFLOPS) is what dictates the frame rate. The fact that the FPS drops by a similar percentage at all settings suggests that the game’s engine scales efficiently with resolution, and the limiting component is the GPU’s ability to process pixels. The CPU’s high single-thread performance is not a bottleneck at any resolution, as evidenced by the high FPS at 1080p, so the GPU is the component to consider when trying to improve 4K performance.
Settings Recommendations
For the best experience, the Medium preset at 1080p is a sweet spot. At 1080p, Medium yields 350 FPS, which is only 64 FPS lower than Low but offers a better visual experience. The minimum FPS of 297 ensures smooth frame pacing, and the maximum of 402 is close to the Low preset’s maximum. At 1440p, High is recommended, as it provides 204 FPS with no reported minimum or maximum, but the data suggests it is stable enough for a 144Hz monitor. The Medium preset at 1440p offers 235 FPS, which is higher, but the visual fidelity of High is worth the slight FPS drop.
At 4K, the Medium preset is the best balance. It delivers 135 FPS, which is above the 120Hz refresh rate, and has a minimum of 114 FPS, which ensures that the game will not drop below 100 FPS in intense scenes. The High preset at 4K offers 117 FPS, which is also above 60 FPS but not as fluid as Medium. The Ultra preset at 4K is not recommended if you are aiming for a 120Hz or 144Hz monitor, as its 94 FPS average is below that threshold. For the most consistent experience, Medium at 1440p is also a strong choice, providing 235 FPS with a minimum of 200, which is more than enough for any high-refresh-rate display.
How This Combo Ranks
The combo of the AMD Ryzen 9 9950X3D and the NVIDIA GeForce RTX 3080 ranks 1,049 out of 3,725 tested combinations in To the Core. This places it in the top 28% of all configurations, which is a solid result for a CPU that is in the 95th percentile of all CPUs and a GPU that is in the 68th percentile of all GPUs. The high CPU performance is not fully utilized in this game, but it does not hurt the pairing either.
The ranking is not higher because the GPU is not as powerful as the CPU, but the game’s light workload means the GPU is not a major bottleneck until 4K. The combo is in the upper-middle tier of the ranking, which is expected given that the GPU is an older generation (2020 release) compared to the CPU (2025 release). The CPU’s 16 cores and 128 MB L3 cache are overkill for this game, but the single-thread performance is what helps the FPS stay high at 1080p. The GPU’s 10 GB VRAM is not a concern, and its 320-bit memory bus provides enough bandwidth for 4K textures. Overall, this pairing is well-suited for To the Core, providing a high refresh rate experience at all resolutions, with the only caveat being that 4K Ultra will not hit 100 FPS.
Hardware Specifications
AMD Ryzen 9 9950X3D
NVIDIA GeForce RTX 3080
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 9950X3D + NVIDIA GeForce RTX 3080 in To The Core
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 159.0 |
| 3840x2160 | Medium | 135.0 |
| 3840x2160 | High | 117.0 |
| 3840x2160 | Ultra | 94.0 |
| 2560x1440 | Low | 278.0 |
| 2560x1440 | Medium | 235.0 |
| 2560x1440 | High | 204.0 |
| 2560x1440 | Ultra | 164.0 |
| 1920x1080 | Low | 414.0 |
| 1920x1080 | Medium | 350.0 |
| 1920x1080 | High | 303.0 |
| 1920x1080 | Ultra | 244.0 |
To The Core with Ryzen 9 9950X3D + Other GPUs
See how To The Core performs with the same CPU but different graphics cards.
To The Core with RTX 3080 + Other CPUs
See how To The Core performs with the same GPU but different processors.
Other Games with Ryzen 9 9950X3D + RTX 3080
Explore FPS benchmarks for other games using this same hardware combination.