Thief
This combination provides smooth gameplay with an average of 64 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 28 | 30 | 39 | 51 |
| 1440p QHD | 48 | 51 | 66 | 88 |
| 1080p Full HD | 70 | 74 | 97 | 128 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Thief with AMD Ryzen 7 9850X3D + NVIDIA GeForce GTX 1070, In-Depth Analysis
The AMD Ryzen 7 9850X3D paired with the NVIDIA GeForce GTX 1070 delivers a playable but uneven experience in Thief, with the data showing a clear ceiling imposed by the graphics card at higher resolutions. This analysis breaks down the measured performance across all tested settings and resolutions, interpreting what the numbers mean for this specific configuration.
FAQ
*Q: What is the best resolution for this combo in Thief?*
A: The data shows 1920x1080 as the only resolution where all settings presets achieve playable frame rates. At this resolution, the average FPS ranges from 70 on Ultra to 128 on Low, whereas at 2560x1440 the Ultra preset drops to 48 FPS and at 3840x2160 even Medium only averages 39 FPS.
Q: How does this combo rank among all tested configurations?
A: This specific combination of CPU and GPU ranks 2375 out of 2851 tested combos for Thief. This places it in the lower third of all configurations, indicating that while functional, it is not a high-performing pairing for this title.
Q: Is the CPU or GPU the limiting factor at 4K?
A: The data indicates the GPU is the primary bottleneck at 3840x2160. The frame rate drops significantly as resolution increases, with the Ultra preset averaging 28 FPS. The Ryzen 7 9850X3D has 8 cores and 16 threads, which is more than sufficient for this 2014 title, but the GTX 1070's 8 GB VRAM and 256.3 GB/s bandwidth struggle to feed the higher pixel counts.
Q: What is the difference between Low and Ultra settings at 1080p?
A: At 1920x1080, switching from Low to Ultra costs 58 FPS. The Low preset averages 128 FPS, High averages 74 FPS, and Ultra averages 70 FPS, showing that the graphical fidelity jump from High to Ultra is relatively small in performance terms compared to the jump from Low to High.
Q: Does the combo maintain consistent frame times?
A: The only settings with both min and max FPS data are the Medium presets. At 1920x1080 Medium, the range is 82 to 111 FPS with an average of 97. At 2560x1440 Medium, the range is 56 to 76 with an average of 66. At 3840x2160 Medium, the range is 33 to 45 with an average of 39. This suggests moderate frame time variance, but no severe stuttering is indicated by the data.
Q: What is the launch MSRP of the CPU?
A: The AMD Ryzen 7 9850X3D has a launch MSRP of $499. This is the only pricing information provided in the data for this configuration.
CPU Role
The AMD Ryzen 7 9850X3D is a desktop processor from the 9000 series, built on the Zen 5 architecture with the Granite Ridge codename. It features 8 cores and 16 threads, with a base clock of 4.70 GHz and a boost clock of 5.60 GHz. The CPU has a 96 MB shared L3 cache, which is a significant amount for gaming workloads. Its benchmark scores are strong, with a Cinebench R23 multicore score of 22807 and a single-core score of 2228.
In the context of Thief, a game released in 2014, the CPU's capabilities far exceed what the title requires. The 8-core/16-thread configuration is more than adequate for the game's threading model, which was designed for the 4-core/8-thread era. The high boost clock of 5.60 GHz ensures that single-threaded performance is not a concern, as evidenced by the passmark single-thread score of 4704. The CPU's percentile vs all CPUs is 92, meaning it outperforms 92% of all processors in the database.
However, the benchmark results for this specific game show that the CPU's power is largely untapped. The measured FPS at 1920x1080 Low is 128, which is high but not exceptional for this processor. The limiting factor is not the CPU's ability to feed the GPU, but rather the GPU's ability to render frames. The CPU's nearest rivals include the Intel Xeon Platinum 8260M with an average score of 58323 (0.1% delta), the Intel Xeon w5-2545 with 58504 (-0.2% delta), and the Intel Core i9-14900 with 58115 (0.5% delta). These negligible deltas show that the CPU is competitive with other high-end processors, but none of that matters if the GPU cannot keep up.
The data suggests that the CPU is never the bottleneck in this pairing. Even at the lowest resolution and settings, where the CPU would be under the most stress, the frame rate is not indicative of a CPU limitation. The Ryzen 7 9850X3D is capable of far higher frame rates in less GPU-bound scenarios, but with the GTX 1070, the CPU's potential is effectively capped by the graphics card's output.
GPU Role
The NVIDIA GeForce GTX 1070 is based on the Pascal architecture, using the GP104 chip manufactured on a 16 nm process. It has 1920 shading units, 120 texture mapping units, and 64 ROPs. The GPU operates at a base clock of 1506 MHz and a boost clock of 1683 MHz. Memory is 8 GB of GDDR5 on a 256-bit bus, providing a bandwidth of 256.3 GB/s. The card's FP32 performance is 6.463 TFLOPS, and it has a texture rate of 202.0 GTexel/s.
For Thief, the GTX 1070 is the definitive performance limiter. The GPU's percentile vs all GPUs is 47, placing it just below the median. Its nearest rivals are the AMD FirePro W5000 with an average score of 9803 (-0.2% delta), NVIDIA Quadro M2000M with 9832 (-0.5% delta), and NVIDIA Tesla M10 with 9724 (0.6% delta). These are all professional or workstation cards, indicating that the GTX 1070 sits in a mid-range position relative to the full database.
The measured FPS data shows a clear pattern: as resolution increases, the frame rate drops proportionally. At 1920x1080, the GPU manages 74 FPS on High settings. At 2560x1440, the same settings yield 51 FPS, a 31% reduction. At 3840x2160, High settings drop to 30 FPS, a 59% reduction from 1080p. This scaling is a classic sign of a GPU that is running out of fill rate and memory bandwidth.
The 8 GB VRAM is sufficient for Thief at all tested settings, as the game is not particularly memory-hungry by modern standards. However, the 256.3 GB/s bandwidth and 107.7 GPixel/s pixel rate are the likely limiting factors at higher resolutions. The Ultra preset at 3840x2160 averages 28 FPS, which is below the threshold for smooth gameplay. The GPU's 47th percentile ranking reflects its age relative to modern cards, but within the context of this benchmark, it is the component that determines the playability ceiling.
How This Combo Ranks
This specific combination of the AMD Ryzen 7 9850X3D and NVIDIA GeForce GTX 1070 ranks 2375 out of 2851 tested combos for Thief. This puts the configuration in the bottom 17% of all tested pairings. The rank is a composite measure that considers the overall performance across all settings and resolutions.
The low rank is primarily attributable to the GPU's age and mid-range positioning. The CPU is a top-tier processor, with an average benchmark score of 58386 and a 92nd percentile ranking against all CPUs. However, the GPU's average benchmark score of 9780 and 47th percentile ranking drag the combo down significantly. In Thief, the GPU is the bottleneck at every resolution above 1080p, and even at 1080p, the Ultra preset only achieves 70 FPS.
The data indicates that this combo is not well-balanced for this game. The CPU has far more processing headroom than the GPU can utilize. For example, at 1920x1080 Low, the combo achieves 128 FPS, but this is likely close to the GPU's maximum output rather than the CPU's. If the GPU were more powerful, the CPU could likely push much higher frame rates. The rank of 2375 suggests that most other tested combos either have a more balanced CPU-GPU pairing or a stronger GPU that can better leverage a high-end CPU.
The delta between the CPU's performance and the GPU's performance is stark. The CPU outperforms 92% of all CPUs, while the GPU outperforms only 47% of all GPUs. This mismatch is the core reason for the low combo rank. In a game like Thief, which is not CPU-intensive, the GPU's limitations are fully exposed, and the CPU's power is largely wasted.
Settings Recommendations
Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and the user's preference for frame rate versus visual quality.
At 1920x1080, the High preset provides an average of 74 FPS, which is smooth for a stealth game. The Ultra preset only delivers 70 FPS, a marginal improvement in visuals for a 4 FPS loss. The Medium preset offers 97 FPS, which is a significant jump in smoothness for a slight reduction in visual quality. The Low preset hits 128 FPS, but the graphical downgrade is substantial. For most users, the High preset appears to be the sweet spot, balancing visual fidelity with playable frame rates.
At 2560x1440, the High preset averages 51 FPS, which is playable but not ideal for a game that requires precise timing. The Medium preset averages 66 FPS, providing a better gameplay experience. The Ultra preset drops to 48 FPS, which is borderline. The Low preset at 88 FPS is the only setting that provides a high frame rate, but it sacrifices too much visual quality. The Medium preset is the recommended choice at this resolution, as it offers the best compromise between visuals and performance.
At 3840x2160, no preset achieves a consistently smooth frame rate. The Low preset averages 51 FPS, which is the highest at this resolution, but it requires the lowest visual quality. The Medium preset averages 39 FPS, which is below the threshold for smooth gameplay. The High preset averages 30 FPS, and the Ultra preset averages 28 FPS. Based on the data, the Low preset is the only viable option at 4K, and even then, the 51 FPS average may not feel consistent during demanding scenes.
The Medium preset at 1920x1080 is notable for having the best frame time data in the entire set, with a min of 82 FPS and max of 111 FPS. This suggests that Medium at 1080p provides both high average performance and good consistency, making it a strong recommendation for users who prioritize smoothness.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of performance across three resolutions and four settings presets.
At 1920x1080, the results are as follows:
- Low: 128 FPS average
- Medium: 97 FPS average, with a range of 82 to 111 FPS
- High: 74 FPS average
- Ultra: 70 FPS average
At 2560x1440, the results are:
- Low: 88 FPS average
- Medium: 66 FPS average, with a range of 56 to 76 FPS
- High: 51 FPS average
- Ultra: 48 FPS average
At 3840x2160, the results are:
- Low: 51 FPS average
- Medium: 39 FPS average, with a range of 33 to 45 FPS
- High: 30 FPS average
- Ultra: 28 FPS average
The data shows a consistent pattern across all settings. The difference between Low and Medium is substantial, with Medium averaging roughly 24% lower FPS than Low at each resolution. The difference between Medium and High is smaller, around 23-24% lower FPS. The difference between High and Ultra is minimal, with Ultra being only 4-6% lower than High. This suggests that the High to Ultra transition offers diminishing returns in visual quality for the performance cost.
The frame time data for the Medium presets shows that the variance increases with resolution. At 1080p, the range is 29 FPS (82 to 111). At 1440p, the range is 20 FPS (56 to 76). At 4K, the range is 12 FPS (33 to 45). This indicates that the frame pacing becomes more consistent as resolution increases, but the overall FPS drops to unacceptable levels at 4K.
Resolution Scaling
The performance drop from 1080p to 4K is steep and consistent across all settings, which reveals a GPU-bound scenario.
At Low settings, the FPS drops from 128 at 1080p to 88 at 1440p (a 31% reduction) and then to 51 at 4K (a 42% reduction from 1440p, or 60% from 1080p). At High settings, the FPS drops from 74 at 1080p to 51 at 1440p (a 31% reduction) and then to 30 at 4K (a 41% reduction from 1440p, or 59% from 1080p). At Ultra settings, the FPS drops from 70 at 1080p to 48 at 1440p (a 31% reduction) and then to 28 at 4K (a 42% reduction from 1440p, or 60% from 1080p).
The consistency of this scaling pattern is telling. Regardless of the settings preset, the performance drop from 1080p to 1440p is almost exactly 31%, and the drop from 1440p to 4K is almost exactly 41-42%. This uniform scaling is a hallmark of a GPU that is completely limited by its pixel throughput and memory bandwidth. The CPU is not a factor in this scaling, as its performance is constant across all resolutions.
The 4K resolution has 4 times the pixels of 1080p, but the FPS does not drop by 75%. Instead, it drops by about 60%, which indicates that the GPU is not purely pixel-bound. The 256.3 GB/s memory bandwidth may be the limiting factor, as higher resolutions require more data to be fetched from VRAM. The 8 GB VRAM is not exhausted by Thief, but the bandwidth is likely saturated.
The data strongly suggests that the GTX 1070 is the sole limiting component in this configuration for Thief. The CPU's performance is far above what the game requires, and the GPU's performance declines in a predictable, linear fashion as resolution increases. To achieve higher frame rates at 1440p or 4K, a more powerful GPU would be necessary, as the current card is operating at its maximum capacity.
Hardware Specifications
AMD Ryzen 7 9850X3D
NVIDIA GeForce GTX 1070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 9850X3D + NVIDIA GeForce GTX 1070 in Thief
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 51.0 |
| 3840x2160 | Medium | 39.0 |
| 3840x2160 | High | 30.0 |
| 3840x2160 | Ultra | 28.0 |
| 2560x1440 | Low | 88.0 |
| 2560x1440 | Medium | 66.0 |
| 2560x1440 | High | 51.0 |
| 2560x1440 | Ultra | 48.0 |
| 1920x1080 | Low | 128.0 |
| 1920x1080 | Medium | 97.0 |
| 1920x1080 | High | 74.0 |
| 1920x1080 | Ultra | 70.0 |
Thief with GTX 1070 + Other CPUs
See how Thief performs with the same GPU but different processors.
Other Games with Ryzen 7 9850X3D + GTX 1070
Explore FPS benchmarks for other games using this same hardware combination.