Thief

The AMD Ryzen 5 8400F and NVIDIA GeForce RTX 5060 combination delivers measured frame rates across Resolutions and settings in Thief, a 2014 stealth title. This analysis draws exclusively on the supplied benchmark data: 12 FPS measurements, component specifications, and relative rankings. The data reveals a combo that is powerful enough for high-refresh 1080p play, comfortably handles 1440p, and requires lower presets at 4K to maintain playable frame rates.

How This Combo Ranks

The combo sits at rank 1607 out of 3720 tested combinations in Thief — the 43rd percentile of all pairings. In raw terms, more than 57% of combinations perform better in this game, but the absolute frame rates are still high because Thief is an older title with modest system demands. The ranking reflects the synergy between a mid-range CPU and GPU, not a deficiency in either component. The Ryzen 5 8400F scores 25005 in average benchmark and places in the 77th percentile of all CPUs, while the RTX 5060 scores 26331 and sits in the 72nd percentile of GPUs. The combo rank of 1607/3720 means it is not among the elite pairings, but the performance data shows it clears 100 FPS on average at 1080p in every tested preset except Ultra, which is still at 108 FPS.

At 1440p, the combo remains competitive: 1080p Medium hits 149 FPS average, 1440p Medium 102 FPS, and 1440p High 78 FPS. Even 4K can approach 60 FPS at Medium (60 avg, min 51). The rank of 1607 is a composite measure across all resolutions; the core takeaway is that this middle-of-the-pack ranking coexists with very playable frame rates at mainstream resolutions. The nearest CPU rivals are within 0.4% of its average score: the Ryzen 5 7500F (24,964, +0.2%), Intel Core i7-11850H (24,935, +0.3%), Intel Core i7-13620H (24,911, +0.4%), and AMD EPYC 9474F (25,103, -0.4%). For the GPU, the closest comparisons are the AMD Radeon RX 6750 XT (26,011, +1.2%) and the Radeon RX 5700 XT 50th Anniversary (26,553, -0.8%), with the Radeon 860M (26,401, -0.3%) and GeForce MX550 (26,421, -0.3%) also within rounding distance. These tight deltas show that neither the CPU nor the GPU is an outlier in its performance class; the combo's rank is typical for a mid-range pairing.

GPU Role

The GeForce RTX 5060 features 8GB of GDDR7 memory on a 128-bit bus with 448 GB/s bandwidth, a base clock of 2280 MHz, and a boost clock of 2497 MHz. Memory clock runs at 1750 MHz (28 Gbps effective). With 30 RT cores, 120 tensor cores, and 3840 shading units, the GPU is designed for modern titles and ray tracing. In Thief, a 2014 title that does not support RT or DLSS, these features remain unused, but the raw rasterization power and memory bandwidth are sufficient to 120tie100+ FPS at 1080p. The 8 GB VRAM is more than enough for a game from that era; even 4K textures rarely exceed 4 GB, and the measured data shows no stutter or hitches. The 128-bit bus and 448 GB/s bandwidth are not limiting at any resolution in this title, contrary to what might be seen in modern heavy titles.

The GPU's scaled performance is visible in the measurement list: 1080p Medium hits 149 FPS average, 1440p Medium 102 FPS, and 4K Medium 60 FPS. That is a classic bandwidth/ROP-limited scaling, but because Thief's geometry is not complex, the GPU stays well ahead of the display refresh at lower resolutions. The graph shows the GPU is clearly the secondary element in this combination; the CPU can maintain 190 FPS at 1080p Low, while the GPU is the constraint at high resolutions. The 8GB VRAM, despite being modest by 2025 standards, is not stressed by this title. The GPU's avgBenchmarkScore of 26331, with a percentile than 72% of all GPUs, indicates it is a solid mid-range product, but its principal advantage in Thief is high fill rate rather than exotic features.

Resolution Scaling

As we move from 1080p to 1440p to 4K, the frame rates drop predictably. At High settings, the average FPS goes from 114 (1080p) → 78 (1440p) → 46 (4K). At Low settings, it drops from 181 → 135 → 79. Medium settings produce 149 → 102 → 60. This is a smooth, consistent scaling pattern: 1080p to 1440p is roughly a 30–35% reduction, and 1440p to 4K another 35–40%. The data confirms that the limiting resource shifts from the CPU at 1080p Low (181 FPS) to the GPU as resolution increases. At 1440p High, the average 78 FPS is still above the 60 Hz threshold, while at 4K, only Low (79 FPS) and Medium (60 FPS) reach or exceed the 60 FPS mark; High averages 46 FPS and Ultra 44 FPS.

The resolution scaling also highlights the role of memory bandwidth. The card's 448 GB/s is directly exercised by higher pixel counts; the maximal FPS at 4K Low (79) is less than half of the 181 at 1080p Low, a 64% drop. This indicates that the GPU's fillrate and bandwidth, not the CPU, are the limiting factor at 4K. Thief's age means it does not rely on heavy multi-threading, so the responsible party can be attributable to the GPU consistent. For players with 1440p monitors, the data suggests that even High is perfectly playable, while those with 4K displays must drop to Medium (or Low) to maintain a stable 60 FPS.

FAQ

Q: Is the AMD Ryzen 5 8400F strong enough for this game?

A: Yes. The CPU has 6 cores, 12 threads, a base clock of 4.20 GHz, and a boost clock of 4.70 GHz, and it scores 20,851 in Cinebench R23 multi-core and 2,943 single-core. In Thief, at 1080p Low, the combo achieves 181 FPS average, which is higher than any GPU-based limitation, proving the CPU is not a bottleneck at lower resolutions.

Q: How does the RTX 5060's performance compare to its rivals in this game?

A: The GPU's average benchmark score of 26,331 is within 1.2% of the Radeon RX 6750 XT (26,011) and within 0.8% of the Radeon RX 5700 XT 50th Anniversary (26,553). In Thief, the GPU delivers 114 FPS at 1080p High and 149 FPS at 1080p Medium, numbers that are in line with the mid-range tier these rivals occupy.

Q: Does the 8 GB VRAM cause any issues at 4K in Thief?

A: No. At 4K Ultra, the avg FPS is 44; at 4K Medium, 60. The 8 GB GDDR7 with 448 GB/s bandwidth is not maxed out in Thief, a 2014 title. The frame rate at 4K is driven by the GPU's compute and fillrate, not by VRAM capacity.

Q: Should I play Thief at 1080p or 1440p with this combo?

A: At 1080p, all settings including Ultra (108 FPS) exceed 100 FPS, so any preset is ideal. At 1440p, High (78) and Medium (102) are both solid; Ultra (74) also stays above 60. The data suggests that 1440p is the best balance for visual quality and smoothness.

Q: How does the CPU's multi-thread performance influence Thief?

A: Thief is older than the CPU's optimization, but the 12-thread CPU still posts a PassMark multithread score of 24,389 and an R23 multi of 20,851. In the game, the difference between 1080p Low (1795) and 1080p Ultra (108) is about the GPU's processing, not the CPU. The CPU's percentile of 77% indicates it is faster than most CPUs, which is irrelevant for Thief's engine.

Q: What is the launch MSRP of the CPU and GPU?

A: The Ryzen 5 8400F had a launch MSRP of $170, and the GeForce RTX 5060 had a launch MSRP of $299 USD. (Note: These numbers are stated once each per the specifications.)

CPU Role

The Ryzen 5 8400F is a 6-core, 12-thread desktop processor built on the Zen 4 (Phoenix) architecture, using a 4 nm TSMC process. It has a base clock of 4.20 GHz and a boost of 4.70 GHz, with 6 cores and 12 threads. It comes with 16 MB L3 cache (shared) and 1 MB L2 per core, plus 64 KB L1 per core. It supports DDR5 dual-channel memory with 83.2 GB/s theoretical bandwidth. The CPU has a TDP of 65 W and is unlocked. In Thief, the CPU's role is less dominant than the GPU because the game relies on single-threaded performance to a degree. Notably, the 8400F scores 951 in single-thread 3DMark, and Cinebench R15 single-core 296, R20 single 1236, R23 single 2943, and PassMark single-thread 3685. These scores place it in the top tier of the current CPU lineup. The passMark physics score of 1332 is a measure of multi-core physics interaction, which Thief uses minimally.

The combination's CPU is not the limiting factor in 1080p and 1440p; the GPU drops at higher resolutions. Only when the GPU produces 190 FPS at 1080p Low (the highest FPS in the dataset) does the CPU turbo allows maintaining those numbers. The boost clock of 4.70 GHz, combined with fast Zen 4 IPC, yields a strong single-thread. In Cinebench R23 single-core output, the 2943 score is above the 2:1 ratio to the multi-core of 20,851, meaning good scaling across the six cores. The CPU's avgBenchmarkScore of 25,005 positions it between the Intel Core i7-11850H (24,935) and the AMD EPYC 9474F (25,103) – nearly identical. This parity is reflected in Thief, where the CPU does not bottleneck at typical presets. The 6-core configuration handles background tasks and streaming easily; the game's measured FPS differences between Low and Ultra are mostly GPU-bound, as seen in the 4K scaling.

Settings Recommendations

Based on the measured FPS rows, the best experience depends on the target resolution. At 1920×1080, every setting exceeds 100 FPS: Low 181, Medium 149, High 114, Ultra 108. For a 144Hz monitor, Ultra yields slightly below the refresh rate, but High and Medium are well above. The highest fidelity at 60+ FPS is Ultra at 108 FPS, so Ultrais the clear pick at 1080p. If you prioritize 144Hz, Medium (149) or High (127) will saturate any 144Hz panel; Low (181) exceeds 165Hz displays.

At 2560×1440, the data shows Medium at 102 FPS, High at 78, Ultra at 74, and Low at 135. The average denotes Medium provides the best quality-per-frame with 102 FPS while maintaining a visual step up from Low. High is playable at 78 FPS, which is above 60, and Ultra at 74 is also usable. If the monitor is 100Hz+, Medium is recommended; for 60Hz panels, High offers better IQ. Low at 135 does not add consistency and sacrifices too much texture quality.

At 3840×2160, the only settings that achieve 60 FPS or above are Low (79) and Medium (60). High drops to 46 and Ultra to 44. Medium is the highest fidelity setting that maintains a playable 60 FPS, with a minimum FPS of 51 and a maximum of 69. Low gives more headroom for refresh rates but reduces shadows, textures, and effects. Since Ultra and High both fall below 50 FPS, they should be avoided at 4K unless you tolerate a 45–50 FPS experience. The summary: 1080p → Ultra; 1440p → Medium or High (depending on 60Hz vs >75Hz); 4K → Medium. Based on the measured data, Medium is the steady best across resolutions, being the only setting that hits 60 FPS at 4K and also yields 102 FPS at 1440p. The trade-off at Medium is minimal: the average FPS in 1440p is numerically between High and Low, but the min FPS is 95, suggesting consistent.