Thief
This combination offers playable performance with an average of 55 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 28 | 32 | 47 |
| 1440p QHD | 42 | 43 | 57 | 74 |
| 1080p Full HD | 63 | 64 | 81 | 112 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Thief with AMD Ryzen 5 7500F + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis
The AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 3050 4 GB delivers playable performance in Thief primarily at 1080p, with the data showing a steep trade-off between visual fidelity and frame rate. The measured results indicate that the Low preset is the only setting that consistently provides a high refresh rate experience, while Medium offers a balanced compromise. The RTX 3050's 4 GB memory and 128-bit bus become the limiting factor as resolution increases, making 1440p a marginal proposition and 4K largely impractical.
Settings Recommendations
For a smooth and responsive experience, the Low preset at 1920x1080 is the clear choice, delivering an average of 111.6 FPS. This is more than double the 47 FPS achieved at 4K with the same settings, highlighting how resolution dramatically impacts this GPU. The Low preset leaves enough headroom for a 60 Hz or even 144 Hz display, ensuring that the game's stealth mechanics remain fluid during quick movements.
If visual quality is a priority, the Medium preset at 1080p is the best compromise, yielding 81.3 FPS. This is still well above the 60 FPS threshold and represents a 27% performance drop from Low, but the visual upgrade in lighting and texture detail is substantial. High settings at 1080p drop to 64.1 FPS, which is still playable but begins to show the GPU's strain, while Ultra at 62.5 FPS offers no meaningful advantage over High for the performance cost.
At 2560x1440, the situation changes. The Low preset is the only viable option for smooth gameplay, hitting 74.3 FPS. Medium drops to 56.7 FPS, which is borderline for a title that benefits from consistent frame pacing. High and Ultra at this resolution are not recommended, as they fall to 43.1 FPS and 41.5 FPS respectively, which can feel sluggish during the game's tense, shadow-heavy sequences. The 4K results are uniformly poor, with even Low at 47 FPS failing to maintain a stable 60 FPS, making this resolution unsuitable for this combo.
FAQ
*Q: What is the best resolution for this CPU and GPU combo in Thief?*
A: The benchmark data shows 1920x1080 as the optimal resolution. At 1080p, even the Ultra preset achieves 62.5 FPS, while at 1440p only the Low preset stays above 60 FPS with 74.3 FPS. 4K is not recommended, as the best result is 47 FPS on Low.
Q: How does the Ultra preset compare to High at 1440p?
A: The difference is minimal. Ultra averages 41.5 FPS, while High averages 43.1 FPS, a margin of less than 4%. Given the negligible performance gap, High is the more sensible choice if you insist on 1440p, as it likely offers nearly identical visuals with slightly better frame pacing.
Q: Is the CPU or GPU the bottleneck in this game?
A: The data indicates a strong GPU bottleneck, especially at higher resolutions. At 1080p, the frame rate scales heavily with settings (from 111.6 FPS on Low to 62.5 FPS on Ultra), which is characteristic of a GPU-limited scenario. The Ryzen 5 7500F's high single-thread performance, evidenced by its Geekbench single-core score of 2759, is sufficient to feed the RTX 3050.
Q: Can this combo handle a 144 Hz monitor?
A: Only at 1080p with the Low preset, which averages 111.6 FPS. The Medium preset at 81.3 FPS is close but will not fully saturate a 144 Hz panel. At higher resolutions or settings, the frame rate falls well below 100 FPS, making a 144 Hz display a wasted investment for this game.
Q: How does the 4 GB VRAM affect performance?
A: The 4 GB frame buffer is a significant constraint. The steep drop from 1080p Medium (81.3 FPS) to 1440p Medium (56.7 FPS) suggests that the GPU is running out of memory bandwidth and capacity at higher resolutions. The 192.0 GB/s bandwidth is insufficient for the increased data load at 1440p and 4K.
Q: What is the frame rate difference between Low and Ultra at 1080p?
A: The gap is substantial. Low averages 111.6 FPS, while Ultra averages 62.5 FPS. This represents a 49 FPS difference, or roughly 44% lower performance, for the highest visual quality settings.
Resolution Scaling
The performance scaling from 1080p to 4K is steep and reveals a GPU-bound system. At the Low preset, the average frame rate drops from 111.6 FPS at 1080p to 74.3 FPS at 1440p, a 33% reduction. Moving to 4K, it falls further to 47 FPS, which is only 42% of the 1080p score. This pattern intensifies at higher settings. For example, the High preset sees a drop from 64.1 FPS at 1080p to 43.1 FPS at 1440p (a 33% loss), and then to 27.8 FPS at 4K (a 57% loss from 1080p).
This non-linear degradation is typical of a GPU with limited memory bandwidth. The RTX 3050's 192.0 GB/s bandwidth and 128-bit bus simply cannot cope with the pixel throughput required at 4K. The data shows that the difference between 1080p and 1440p is large, but the jump to 4K is catastrophic. The Ultra preset at 4K yields just 22.8 FPS, which is effectively unplayable. The scaling suggests that the 4 GB VRAM is exhausted at 1440p with high settings, forcing the GPU to rely on slower memory operations, which craters performance. The CPU, with its 6 cores and 12 threads, is not the limiting factor here; the consistent frame rate drops across all settings point squarely at the graphics card.
How This Combo Ranks
The data places this combination at rank 1502 out of 1642 tested combos for Thief. This puts it in the bottom 9% of all tested systems, which is a low standing. This ranking reflects the RTX 3050's position as a 50th percentile GPU, while the CPU is in the 82nd percentile. The GPU's modest performance holds the combo back significantly. The rank is not a reflection of the Ryzen 5 7500F, which is a capable processor, but rather the severe imbalance between the CPU's potential and the GPU's actual output in this specific title.
In practical terms, this means most other tested combinations will outperform this setup. The low rank is driven by the 4 GB VRAM limitation and the GPU's 7.127 TFLOPS of FP32 compute, which is insufficient for high-resolution gaming in a 2014 title that still demands substantial fill rate. The combo's performance is adequate for 1080p gaming, but the ranking correctly indicates that it is not a competitive pairing for higher resolutions or maximum settings. The 4K results, where even Low settings fail to hit 50 FPS, are the primary reason for the poor standing.
CPU Role
The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture. It has a base clock of 3.70 GHz and a boost clock of 5.00 GHz. This is a strong CPU for gaming, with a Cinebench R23 single-core score of 3218 and a multi-core score of 22799. In Thief, the CPU's role is to feed the GPU with draw calls and game logic. Given the low frame rates at 4K, the CPU is never stressed.
The data shows that at 1080p, the GPU is the clear bottleneck. The fact that the frame rate varies significantly with settings (from 111.6 FPS on Low to 62.5 FPS on Ultra) confirms that the CPU can handle the workload at all settings. The 7500F's single-thread performance, as shown by its 3DMark single-thread score of 974, is more than adequate for a game from 2014. The CPU's 32 MB of shared L3 cache likely helps with game asset streaming, but the primary limiter remains the GPU's 4 GB memory capacity. The CPU's 83.2 GB/s memory bandwidth is also not a factor, as the GPU's 192.0 GB/s bandwidth is the one that matters for frame rendering.
Measured FPS Breakdown
At 1920x1080, the measured average frame rates are as follows:
- Low: 111.6 FPS
- Medium: 81.3 FPS
- High: 64.1 FPS
- Ultra: 62.5 FPS
These results show a clear hierarchy. The jump from Low to Medium costs 30.3 FPS, while the jump from Medium to High costs 17.2 FPS. The difference between High and Ultra is minimal, only 1.6 FPS, suggesting that Ultra settings offer no tangible benefit over High in this configuration.
At 2560x1440, the average frame rates are:
- Low: 74.3 FPS
- Medium: 56.7 FPS
- High: 43.1 FPS
- Ultra: 41.5 FPS
Here, the performance drops are more pronounced. Medium falls below the 60 FPS threshold, and High and Ultra are both below 45 FPS. The 1440p results indicate that this resolution is only suitable for the Low preset.
At 3840x2160, the average frame rates are:
- Low: 47 FPS
- Medium: 31.8 FPS
- High: 27.8 FPS
- Ultra: 22.8 FPS
All 4K results are below 50 FPS, with even the Low preset failing to maintain a stable 60 FPS. The Ultra preset at 22.8 FPS is a slideshow. This data conclusively shows that 4K gaming is not viable with this GPU. The measured FPS data aligns with the combo's low rank, confirming that this system is best utilized at 1080p with medium or low settings for a responsive experience.
Hardware Specifications
AMD Ryzen 5 7500F
NVIDIA GeForce RTX 3050 4 GB
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7500F + NVIDIA GeForce RTX 3050 4 GB in Thief
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 47.0 |
| 3840x2160 | Medium | 31.8 |
| 3840x2160 | High | 27.8 |
| 3840x2160 | Ultra | 22.8 |
| 2560x1440 | Low | 74.3 |
| 2560x1440 | Medium | 56.7 |
| 2560x1440 | High | 43.1 |
| 2560x1440 | Ultra | 41.5 |
| 1920x1080 | Low | 111.6 |
| 1920x1080 | Medium | 81.3 |
| 1920x1080 | High | 64.1 |
| 1920x1080 | Ultra | 62.5 |
Thief with RTX 3050 4 GB + Other CPUs
See how Thief performs with the same GPU but different processors.
Other Games with Ryzen 5 7500F + RTX 3050 4 GB
Explore FPS benchmarks for other games using this same hardware combination.