The Technomancer

The AMD Ryzen 9 5950X paired with the NVIDIA GeForce RTX 5060 delivers a distinctly GPU-bound experience in The Technomancer, a 2016 Action RPG. The 16-core, 32-thread Zen 3 processor, with a base clock of 3.40 GHz and boost up to 4.90 GHz, provides far more computational headroom than this title can exploit. The data shows that even at 1080p Low settings, where the CPU workload is typically most demanding, the combo achieves 176.9 FPS, suggesting the processor is not the limiting factor. The RTX 5060, built on the Blackwell 2.0 architecture with a boost clock of 2497 MHz and 8 GB of GDDR7 memory on a 128-bit bus, is the primary driver of frame rates across all measured configurations. The CPU's 64 MB of L3 cache and dual-channel DDR4 memory support are ample for a game from this era, but the benchmark results indicate that the GPU's shading units and memory bandwidth dictate the performance ceiling.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 9 5950X is a desktop-class processor with 16 physical cores and 32 threads, a configuration that excels in heavily threaded synthetic workloads like Cinebench R23 multi-core (38607 points) and Passmark multithread (45424 points). However, The Technomancer, released in 2016, was designed for a generation of CPUs with far fewer cores. The measured frame rates show that the game's engine does not create a significant CPU bottleneck, even at high refresh rates. At 1080p Low, the average FPS of 176.9 represents the absolute peak of this combo's capability in this title, but this is likely due to the GPU being able to process frames quickly when the render load is light, rather than the CPU pushing past a limitation.

The processor's single-thread performance, as indicated by a Geekbench single-core score of 2211 and a Cinebench R23 single-core score of 5450, is robust, but the game's reliance on older APIs and rendering paths means it does not leverage the full capabilities of the Zen 3 architecture. The benchmark data reveals a pattern: as resolution increases, the FPS drops consistently, which is the classic signature of a GPU-limited scenario. The CPU's role here is to feed the GPU with draw calls and game logic; with 16 cores, it performs this task with significant headroom, ensuring that the RTX 5060 is never starved of data. In practical terms, the Ryzen 9 5950X is overkill for this specific title, as the game's performance scaling is almost entirely dependent on the graphics card's fill rate and pixel processing power.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: How does the Ryzen 9 5950X compare to its nearest rivals in average benchmark score?

A: The Ryzen 9 5950X has an average benchmark score of 49062, which places it 0.2% below the Intel Core i5-14600K (49166) and 0.6% below the Intel Core i5-14600KF (49367). It scores 0.7% higher than the Intel Xeon Gold 5318H (48698) and 1.1% below the AMD EPYC 4345P (49595).

Q: What is the performance difference between the RTX 5060 and the AMD Radeon RX 7700 XT?

A: The RTX 5060 has an average benchmark score of 30109, which is statistically identical to the AMD Radeon RX 7700 XT's score of 30097, representing a 0% delta. The two cards are effectively tied in synthetic benchmarks.

Q: What frame rate can be expected at 1440p with High settings?

A: At 2560x1440 with High settings, the combo achieves an average of 75.1 FPS. This is a comfortable performance level for most monitors, representing a 35.3% drop from the 1080p High result of 116.1 FPS.

Q: Is the combo more CPU-limited or GPU-limited in this game?

A: The data strongly indicates a GPU limit. At 1080p Low, the system produces 176.9 FPS. Moving to 4K Low, the frame rate drops to 65.8 FPS, a 62.8% decrease. This significant scaling with resolution shows that the GPU is the bottleneck, as a CPU limit would show smaller FPS changes across resolutions.

Q: What is the combo's rank among all tested configurations for this game?

A: The combo ranks 857th out of 1656 tested combos for The Technomancer. This places it in the middle of the pack, indicating that while it provides playable performance, many other CPU/GPU pairings achieve higher average frame rates in this specific title.

Q: What is the minimum FPS recorded for the most demanding settings?

A: The measured data does not include minimum FPS values. The lowest average FPS recorded is 30.4 at 4K Ultra settings, which is the only configuration that falls below the standard 30 FPS playability threshold.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The resolution scaling data provides a clear picture of the system's behavior under increasing pixel loads. Starting at 1080p with High settings, the combo produces 116.1 FPS. Stepping up to 1440p High reduces this to 75.1 FPS, a 35.3% decrease. Moving to 4K High yields 40.7 FPS, which is a 64.9% drop from the 1080p baseline. This pattern of diminishing returns with pixel count is textbook GPU-bound behavior. The RTX 5060's 8 GB of GDDR7 memory and 128-bit bus, with a bandwidth of 448.0 GB/s, are being saturated as resolution increases, causing the frame rate to plummet.

The Low settings row emphasizes this further. At 1080p Low, the system hits 176.9 FPS, a figure that suggests the CPU is capable of pushing well beyond 200 FPS if the GPU were not the constraint. At 1440p Low, the average is 116.2 FPS, and at 4K Low, it is 65.8 FPS. The FPS drop from 1080p to 4K at Low settings is 62.8%, which is nearly identical to the percentage drop seen at High settings. This consistency across quality presets is a strong indicator that the rendering resolution is the dominant factor, not the texture complexity or shading effects. The data shows that the Ryzen 9 5950X has no trouble keeping up with the RTX 5060's output demands; the GPU is the sole arbiter of performance at every resolution tested.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combo's ranking of 857th out of 1656 tested combinations places it squarely in the 51.8th percentile of all tested systems for The Technomancer. This is a middling result that reflects the specific performance characteristics of this pairing in a game that is not particularly demanding on modern hardware. The RTX 5060, which sits at the 73rd percentile among all GPUs, is not a top-tier part, and its performance here is consistent with its mid-range positioning. The Ryzen 9 5950X, while a high-end CPU at the 93rd percentile, does not boost the combo's ranking because the game does not utilize its multi-threaded advantage.

The ranking suggests that many other combos, likely those with more powerful graphics cards or those specifically optimized for older titles, achieve higher frame rates. A combo with a lower-tier CPU but a faster GPU would likely rank higher in this game, as the GPU is the limiting factor. The 857th rank indicates that the average FPS results across all settings are not particularly competitive. For example, hitting 116.1 FPS at 1080p High is decent, but many other systems likely exceed this figure. The data positions this pairing as a functional but not exceptional choice for this game, with its performance being dictated almost entirely by the RTX 5060's mid-range capabilities.

Settings Recommendations — which preset gives the best experience per the measured rows

The measured rows provide a clear hierarchy of performance across the four quality presets at each resolution. At 1080p, the Ultra preset delivers 89.6 FPS, which is playable and visually superior to the High preset's 116.1 FPS. The jump from High to Ultra costs 26.5 FPS, a 22.8% reduction, but the visual fidelity gains in a 2016 title are typically substantial. The Medium preset at 137.2 FPS and Low at 176.9 FPS are far above the refresh rate of most standard monitors, so they offer no practical benefit unless the user has a 165 Hz or higher display. For a balanced experience at 1080p, the High preset is the sweet spot, providing a high frame rate without sacrificing too much visual quality.

At 1440p, the Ultra preset manages 60.1 FPS, which is just at the threshold of smooth gameplay. The High preset at 75.1 FPS is the recommended choice, as it offers a 25% performance increase over Ultra while still maintaining a good level of detail. The Medium preset at 89.3 FPS and Low at 116.2 FPS are also viable, but they begin to diminish the visual experience. At 4K, the situation becomes more constrained. The Ultra preset drops to 30.4 FPS, which is below the ideal playability threshold. The High preset at 40.7 FPS is the minimum recommended for a playable experience, though it is not smooth. The Medium preset at 48.4 FPS is slightly better, and the Low preset at 65.8 FPS is the only configuration that provides a comfortable frame rate at 4K. For this resolution, the data suggests using Medium or Low settings to maintain playability, as the GPU's 8 GB memory and bandwidth are insufficient for high-fidelity rendering at 3840x2160.