The Technomancer

The AMD Ryzen 7 9800X3D paired with the AMD Radeon RX 6800 XT delivers a strong showing in The Technomancer, landing at rank 585 out of 1656 tested combos. That places this pairing in the top 35% of all configurations tested for this Action RPG, which is respectable given the age of the title and the horsepower on hand. The combination of the Ryzen 7’s high multi-threaded throughput and the Radeon’s substantial rasterization muscle means very few frames are left on the table. The data indicates a balanced setup where neither component consistently bottlenecks the other, though the scaling patterns reveal which part takes the lead as resolution climbs.

How This Combo Ranks

The combo’s rank of 585 out of 1656 tested configurations puts it above the median, but it is not a top-tier performer for this specific title. The data shows that while the CPU and GPU are individually strong — the CPU sits in the 90th percentile among all processors and the GPU in the 87th percentile among all graphics cards — their combined result in The Technomancer is more modest. This is likely due to the game’s engine being less sensitive to the extreme thread counts and cache advantages the Ryzen 7 offers, while the RX 6800 XT’s raw fill rate is sufficient but not overwhelming for this 2016 release.

What matters more is how this combo behaves at the settings users actually play. The measured FPS rows show that the pairing scales predictably: at 1080p it can push well past 200 FPS on Low, but at 4K Ultra it drops below 40 FPS. That spread is typical for a high-refresh 1440p-oriented build. The CPU’s nearest rivals — the Intel Xeon 6353P, Core Ultra 5 225, Core i9-13900HK, and Core i5-13600KF — all score within 0.7% of the Ryzen 7’s average benchmark score, meaning the 9800X3D is not dramatically ahead in synthetic tests. In The Technomancer specifically, the game’s reliance on single-thread performance and GPU bound rendering means the CPU’s 3DMark 2-thread score of 2394 and single-thread score of 1212 are more relevant than its multicore might suggest.

GPU Role

The AMD Radeon RX 6800 XT is the workhorse here, and its 16 GB of GDDR6 memory on a 256-bit bus with 512.0 GB/s bandwidth gives it ample headroom for The Technomancer’s texture-heavy scenes. The GPU’s boost clock of 2250 MHz and game clock of 2015 MHz are the figures that drive FPS, and the data confirms this: at 1080p High, the combo hits 142.4 FPS, which is far beyond what a CPU-limited scenario would produce. The GPU’s 4608 shading units and 288 TMUs are more than enough for a game from 2016, so the limiting factor at lower resolutions is often the CPU’s ability to feed the render pipeline.

At 4K, the GPU’s role becomes critical. The measured 4K High average of 52.8 FPS and 4K Ultra of 39.4 FPS show that the RX 6800 XT is being pushed hard, but it still delivers playable results on High. The GPU’s percentile of 87 versus its nearest rivals — the Intel Arc A550M at 0.5% lower, the NVIDIA RTX A1000 at 1.7% higher, and the NVIDIA CMP 50HX at 1.9% lower — indicates it is a mid-pack performer relative to other high-end cards. In The Technomancer, the GPU’s FP32 throughput of 20.74 TFLOPS is the key spec, as the game’s lighting and particle effects respond well to raw compute. The 128 ROPs provide solid pixel fill, which is why 4K High stays above 50 FPS rather than dipping into the 30s.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and reveals the GPU-bound nature of this game at higher resolutions. At High settings, the combo delivers 142.4 FPS at 1080p, 90.4 FPS at 1440p, and 52.8 FPS at 4K — a 63% reduction from 1080p to 4K. At Ultra settings, the same pattern holds: 113.6 FPS at 1080p, 74.6 FPS at 1440p, and 39.4 FPS at 4K. This scaling is consistent with a GPU that is doing the heavy lifting, as the Ryzen 7 9800X3D’s single-thread performance of 1212 in 3DMark would not bottleneck at these frame rates.

The interesting divergence appears at Low settings. At 1080p Low, the combo hits 213.1 FPS, which is nearly double the 4K Low score of 78.5 FPS. That 2.7x gap between 1080p and 4K Low suggests the CPU starts to become more relevant at very high frame rates, but even then, the Ryzen 7’s 8 cores and 16 threads are sufficient — the limiting factor remains the GPU’s pixel throughput. The data indicates that for 1440p gaming, which is the sweet spot for this pairing, the High preset at 90.4 FPS is the most balanced point, offering smooth gameplay without pushing the GPU to its thermal limits. At 4K, users should expect to drop to High or Medium to stay above 50 FPS, as Ultra at 39.4 FPS is borderline for action gameplay.

FAQ

Q: Can this combo handle 4K gaming in The Technomancer?

A: Yes, but only at reduced settings. The measured 4K High average is 52.8 FPS, while 4K Ultra drops to 39.4 FPS. For a locked 60 FPS experience, you would need to use Medium (56.9 FPS) or Low (78.5 FPS).

Q: What is the best resolution for this pairing?

A: 1440p offers the best balance of visual quality and performance. At 1440p High, the combo achieves 90.4 FPS, and even Ultra stays at 74.6 FPS, both well above playable thresholds.

Q: Is the Ryzen 7 9800X3D holding back the RX 6800 XT in this game?

A: No. The CPU’s benchmarks show it is in the 90th percentile, and the measured FPS scaling from 1080p to 4K is consistent with GPU-bound performance. The 1080p Low score of 213.1 FPS shows the CPU can feed very high frame rates.

Q: How does this combo compare to its nearest rivals in synthetic benchmarks?

A: The CPU scores within 0.7% of the Intel Core i5-13600KF and Core i9-13900HK in average benchmark score. The GPU is within 2.6% of the NVIDIA GeForce RTX 4070 Ti SUPER and 1.7% of the NVIDIA RTX A1000.

Q: Should I use Ultra settings for this game?

A: Only at 1080p or 1440p. At 1080p Ultra, the combo hits 113.6 FPS, and at 1440p Ultra it manages 74.6 FPS. At 4K Ultra, the 39.4 FPS average is likely too choppy for fast-paced combat.

Q: Is the 16 GB VRAM on the RX 6800 XT necessary for this game?

A: The Technomancer from 2016 does not require 16 GB, but the memory bandwidth of 512.0 GB/s helps at 4K. The extra capacity ensures no texture pop-in or stutter at high resolutions, even if the game doesn’t fully utilize it.

Settings Recommendations

For the best experience, the data points to 1440p High as the optimal preset for this combo. The 90.4 FPS average at 1440p High is smooth and leaves headroom for occasional drops, while the visual uplift from Medium (110.1 FPS) is worth the 18% frame rate cost. At 1080p, High at 142.4 FPS is the smart choice for high-refresh monitors, though Medium at 165.2 FPS and Low at 213.1 FPS are available for competitive play. Ultra at 1080p is still very playable at 113.6 FPS, but the gains over High are typically marginal in a 2016 title.

At 4K, the recommendation shifts to Medium. The 4K Medium average of 56.9 FPS is just above the 60 FPS target, and the jump to High only adds 3.1 FPS while demanding more from the GPU. 4K Low at 78.5 FPS is the only way to get a truly smooth 4K experience, but it sacrifices too much visual fidelity for an Action RPG where atmosphere matters. The Ultra preset is only viable at 1080p, where the 113.6 FPS average keeps gameplay responsive. For most users, 1440p High is the sweet spot — it uses the RX 6800 XT’s 16 GB buffer effectively without pushing the GPU into the sub-50 FPS territory that 4K Ultra occupies.

CPU Role

The AMD Ryzen 7 9800X3D plays a supporting role in The Technomancer, but its specs ensure it never becomes a liability. With 8 cores and 16 threads based on Zen 5 (Granite Ridge) architecture, the CPU provides ample processing power for the game’s AI and physics systems. The 4.70 GHz base clock and 5.20 GHz boost clock are high enough to avoid CPU bottlenecks in most scenes, as evidenced by the 1080p Low score of 213.1 FPS. The 3DMark single-thread score of 1212 and 2-thread score of 2394 show solid per-core performance, which matters more than the multicore score of 10067 for a game that likely uses a limited number of threads.

The CPU’s 96 MB of shared L3 cache is a notable feature, though The Technomancer from 2016 may not fully exploit it. The benchmark results show the 9800X3D sits at the 90th percentile, with an average benchmark score of 37780 that is nearly identical to the Intel Xeon 6353P (37811) and Core Ultra 5 225 (37831). In game-specific tests, the CPU’s passmark single-thread score of 4430 and cinebench R23 single-core score of 4800 indicate it can handle the game’s logic threads without stuttering. The 120 W TDP and dual-channel DDR5 memory support with 89.6 GB/s bandwidth are sufficient for this title. The data shows that while the CPU is not the star of the show, it provides the stable foundation that allows the RX 6800 XT to deliver its measured frame rates without variability.