The Technomancer

The AMD Ryzen 7 9700X and NVIDIA GeForce RTX 3070 Ti combination delivers a playable experience in The Technomancer, but its performance profile is heavily dictated by resolution and settings. The data shows this combo ranks 666th out of 1656 tested combinations, placing it in the upper-middle tier of systems. This pairing is capable of high refresh rates at 1080p, but 4K Ultra pushes it beyond its comfort zone, resulting in sub-60 FPS averages.

Resolution Scaling

The scaling from 1080p to 4K reveals a system where the RTX 3070 Ti becomes the primary limiting factor as pixel count increases. At High settings, the average frame rate drops from 132.9 FPS at 1920x1080 to 83.8 FPS at 2560x1440, a reduction of approximately 37%. Pushing further to 3840x2160 yields just 47.6 FPS, representing a 64% drop from the 1080p baseline. This steep decline indicates that the GPU is struggling to maintain throughput as the render load multiplies.

The scaling pattern at Low settings is even more revealing. The RTX 3070 Ti manages 202.2 FPS at 1080p, which falls to 128.7 FPS at 1440p and 75 FPS at 4K. The fact that even at Low settings 4K performance nearly halves compared to 1440p suggests the memory bandwidth and compute resources of the GA104 chip are saturated. A CPU-bound scenario would show a flatter curve across resolutions, which is not the case here. The Ryzen 7 9700X, with its 8 cores and 16 threads, is clearly not the bottleneck at higher resolutions; the GPU's 8 GB of GDDR6X memory and 608.3 GB/s bandwidth are being taxed heavily.

At Ultra settings, the frame rate plummets to 35.8 FPS at 4K, which is below the threshold for smooth gameplay. The gap between 1440p Ultra (69 FPS) and 4K Ultra (35.8 FPS) is a 48% reduction, confirming that the highest preset introduces effects that disproportionately impact the GPU. This data indicates that the RTX 3070 Ti is the limiting component at 4K across all presets, while at 1080p the CPU can still feed the GPU effectively, given the high frame rates achieved.

Settings Recommendations

Based on the measured rows, the Medium preset at 2560x1440 offers the best balance of visual fidelity and performance. The average of 103.6 FPS at this setting is comfortably above 60 FPS and provides a 51% improvement over High settings at the same resolution (83.8 FPS). The jump from Medium to High at 1440p costs 19.8 FPS, which is a significant penalty for what is typically a modest visual upgrade in this title.

For players prioritizing frame rate at 1080p, the High preset at 132.9 FPS is the clear choice. It delivers excellent smoothness while keeping the GPU utilization high. Choosing Ultra at 1080p drops performance to 103.4 FPS, a 22% reduction, which may not be justified by the incremental visual gains. The Low preset at 1080p reaches 202.2 FPS, but this is excessive for most displays and sacrifices too much visual quality.

At 4K, the situation is more constrained. The Low preset averages 75 FPS, which is playable, but Medium (57.2 FPS) and High (47.6 FPS) fall below the 60 FPS target. The Ultra preset at 35.8 FPS is not recommended for serious gameplay. The data suggests that 4K users should either stick to Low settings or consider lowering the resolution to 1440p for a better experience. The Medium preset at 1440p is the sweet spot for this hardware combination.

How This Combo Ranks

The combination of the Ryzen 7 9700X and RTX 3070 Ti ranks 666th out of 1656 tested combinations in The Technomancer. This places it in the 60th percentile of all tested systems, meaning roughly 40% of configurations perform better. This rank reflects a balanced pairing where neither component is severely mismatched, but the GPU's age limits its standing against newer hardware.

The CPU itself scores in the 89th percentile against all processors, with an average benchmark score of 36029. This places it slightly above the Intel Core i5-14500HX (35940, 0.2% slower) and just below the Intel Core Ultra 9 185H (36165, 0.4% faster). The GPU, however, sits in the 74th percentile against all graphics cards, with an average benchmark score of 30849. Its closest rivals include the AMD Radeon RX 6700 (31112, 0.8% faster) and the NVIDIA Quadro M5000 (31142, 0.9% faster). This gap between CPU and GPU percentiles explains the mid-tier combo ranking; the processor has more headroom than the graphics card can utilize in this game.

The 666th rank out of 1656 is not a poor result, but it indicates that this system is better suited for 1080p and 1440p gaming rather than being a top-tier 4K contender. The data shows that the combo's performance is constrained by the GPU, which is reflected in its lower percentile ranking relative to the CPU.

Measured FPS Breakdown

At 1920x1080, the RTX 3070 Ti delivers its strongest results. The Low preset averages 202.2 FPS, followed by Medium at 154.7 FPS, High at 132.9 FPS, and Ultra at 103.4 FPS. The scaling from Low to Ultra shows a 49% reduction in frame rate, which is a typical range for this GPU class.

Moving to 2560x1440, the averages are 128.7 FPS (Low), 103.6 FPS (Medium), 83.8 FPS (High), and 69 FPS (Ultra). The drop from 1080p to 1440p at each preset is consistent, with roughly a 30-36% reduction in performance. This resolution is where the GPU starts to feel the pressure, but all presets remain above the 60 FPS threshold.

At 3840x2160, the numbers fall significantly. The Low preset averages 75 FPS, Medium drops to 57.2 FPS, High to 47.6 FPS, and Ultra to 35.8 FPS. The delta between Low and Ultra at 4K is a 52% performance loss, highlighting the intense demand of the highest settings at this resolution. The 4K Medium result of 57.2 FPS is just below the 60 FPS target, making it borderline for smooth gameplay.

GPU Role

The NVIDIA GeForce RTX 3070 Ti is built on the GA104 chip using Samsung's 8 nm process. It houses 6144 shading units, 192 texture mapping units, and 96 ROPs, with 48 RT cores and 192 tensor cores. The GPU operates at a base clock of 1575 MHz and a boost clock of 1770 MHz, with memory running at 1188 MHz (19 Gbps effective). The 8 GB of GDDR6X memory on a 256-bit bus provides 608.3 GB/s of bandwidth.

In The Technomancer, these specs translate to a GPU that can handle 1080p and 1440p with ease but struggles at 4K Ultra. The 8 GB VRAM capacity is likely a limiting factor at 4K with high-resolution textures, as the game may be spilling over into system memory. The pixel rate of 169.9 GPixel/s and texture rate of 339.8 GTexel/s are adequate for the mid-range presets, but the Ultra preset's additional effects tax the shading units heavily.

The GPU's benchmark scores show a Passmark G3D score of 23356 and a 3DMark Steel Nomad DX12 score of 3478. Its average benchmark score of 30849 places it in the 74th percentile, with rivals like the RX 6700 performing marginally better. The frame rate data confirms that the GPU is the primary determinant of performance in this game, especially as resolution increases.

FAQ

*Q: What is the best resolution for this combo in The Technomancer?*

A: The data shows 2560x1440 with Medium settings provides 103.6 FPS, offering a good balance. At 1920x1080, High settings deliver 132.9 FPS for higher refresh rates.

*Q: Can this system run The Technomancer at 4K smoothly?*

A: Only at Low settings, which average 75 FPS. Medium (57.2 FPS), High (47.6 FPS), and Ultra (35.8 FPS) all fall below the 60 FPS target.

Q: How does the Ryzen 7 9700X compare to its nearest rivals?

A: The CPU scores 36029 average, which is 0.2% faster than the Intel Core i5-14500HX (35940) and 0.4% slower than the Intel Core Ultra 9 185H (36165).

Q: Is the RTX 3070 Ti a bottleneck for the Ryzen 7 9700X?

A: Yes, at 4K resolutions the GPU is the limiting factor. The CPU ranks in the 89th percentile while the GPU ranks in the 74th percentile, and frame rates drop significantly at higher resolutions.

Q: What is the frame rate difference between High and Ultra at 1440p?

A: High averages 83.8 FPS while Ultra averages 69 FPS, a difference of 14.8 FPS. The performance drop is more pronounced at 4K, where the gap is 11.8 FPS.

Q: What is the combo's overall ranking?

A: It ranks 666th out of 1656 tested combinations, placing it in the upper-middle tier of systems tested.

CPU Role

The AMD Ryzen 7 9700X is a Zen 5 architecture processor (Granite Ridge) built on TSMC's 4 nm process. It features 8 cores and 16 threads with a base clock of 3.80 GHz and a boost clock of 5.50 GHz. The CPU has a 65W TDP and supports DDR5 memory on the AM5 socket. Its cache configuration includes 80 KB of L1 per core, 1 MB of L2 per core, and 32 MB of shared L3 cache.

In The Technomancer, the CPU's role is to feed the GPU with draw calls and game logic. The benchmark results show strong single-threaded performance, with a 3DMark single-thread score of 1280 and a Cinebench R23 single-core score of 4459. This is crucial for a game that may not scale perfectly across all 16 threads. The multi-threaded scores are also robust, with a Cinebench R23 multicore score of 31588 and a Geekbench multicore score of 17002.

The data indicates that the CPU is not the limiting factor in most scenarios. At 1080p Low, the system reaches 202.2 FPS, which suggests the CPU can handle high frame rates. The 89th percentile ranking and an average benchmark score of 36029 put it slightly ahead of the Intel Core i5-14500HX (35940, 0.2% slower) and slightly behind the Intel Core Ultra 9 185H (36165, 0.4% faster). The Ryzen 7 9700X provides ample processing power for this game, and its performance headroom is only exposed when the GPU is not the bottleneck. In practice, the RTX 3070 Ti's limitations at higher resolutions mean the CPU's full potential is rarely utilized in this title.