The Technomancer

The Technomancer, a 2016 Action RPG, presents an interesting test for the AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 5070 pairing. The benchmark data reveals a component combination that is heavily GPU-limited at higher resolutions but shows clear signs of CPU influence at 1080p. This analysis breaks down the measured FPS across resolutions and presets to give a practical view of what this combo delivers.

Resolution Scaling

The FPS drop from 1080p to 4K is stark and tells a clear story about where the bottleneck lies. At High settings, the average frame rate falls from 164.6 FPS at 1920x1080 to 106 FPS at 2560x1440, and finally to 61.3 FPS at 3840x2160. This represents a 63% reduction in frame rate from 1080p to 4K. The scaling is consistent with a GPU-bound scenario, where the rendering load increases dramatically with pixel count.

What is more revealing is the scaling pattern at different presets. At Low settings, the drop is even more pronounced: 250 FPS at 1080p falls to 165.2 FPS at 1440p and then to 91.6 FPS at 4K. The fact that Low settings at 1080p reaches 250 FPS while High settings at the same resolution only hits 164.6 FPS suggests that the CPU is capable of pushing much higher frame rates, but the GPU becomes the limiting factor as graphical load increases.

The Ultra preset shows the steepest degradation curve. Starting at 126.5 FPS at 1080p, it drops to 84.7 FPS at 1440p and bottoms out at 47.2 FPS at 4K. This 4K Ultra result is the only measured point below 60 FPS, indicating that this combination cannot maintain a smooth 60+ FPS experience at maximum settings in 4K. The gap between Medium and Ultra at 4K is particularly telling: 69.1 FPS versus 47.2 FPS, a 46% performance penalty for the highest preset.

The data suggests that at 1080p, the system is partially CPU-limited, especially at lower presets where the GPU has less work to do. The 250 FPS Low result at 1080p appears to be near the CPU's practical ceiling for this game, as the Ryzen 7 7800X3D's 8 cores and 16 threads handle the game logic while the RTX 5070 waits for more work. At 1440p and above, the GPU workload dominates, and the scaling becomes more predictable.

GPU Role

The NVIDIA GeForce RTX 5070 is the primary driver of performance in this game at most resolutions. With 12 GB of GDDR7 memory on a 192-bit bus, the card offers 672.0 GB/s of bandwidth. The GPU clocks are listed with a base of 2325 MHz and a boost of 2512 MHz, which are the figures that define its processing throughput.

The VRAM capacity appears sufficient for this title. The Technomancer, being a 2016 release, does not appear to stress the 12 GB frame buffer at any of the tested settings. The benchmark results show no anomalous dips that would suggest memory capacity issues, even at 4K Ultra where the game would be most demanding on VRAM. The memory bandwidth of 672.0 GB/s is substantial and likely contributes to the smooth scaling seen between Medium and High presets.

The RTX 5070's compute capabilities are well-suited to this game's rendering requirements. The card's 30.87 TFLOPS FP32 performance and 482.3 GTexel/s texture rate provide ample headroom for the DirectX 12 rendering path. The GPU's percentile rank of 83 among all GPUs, with an average benchmark score of 41687, places it as a strong performer, though the nearest rival data shows it is closely matched with the NVIDIA GeForce RTX 3090 (0.6% delta) and the AMD Radeon Pro 5300 (0.2% delta).

The practical impact of the GPU is most visible in the 4K results. The RTX 5070 manages 61.3 FPS at High settings, which is playable, but the jump to Ultra drops the average to 47.2 FPS. This indicates that the Ultra preset introduces rendering features that significantly tax the GPU, and the card cannot maintain a locked 60 FPS under those conditions.

Settings Recommendations

The benchmark data provides clear guidance on the optimal settings for this combination. At 1920x1080, every preset delivers playable frame rates, but the High preset at 164.6 FPS offers the best balance. The Medium preset at 193.7 FPS is slightly faster, but the visual fidelity gain from High is worth the 29 FPS difference for most users. The Ultra preset at 126.5 FPS is still smooth, but the marginal visual improvements may not justify the 23% performance hit over High.

At 2560x1440, High settings at 106 FPS is the sweet spot. This provides a comfortable margin above 60 FPS and should result in consistent frame pacing. The Ultra preset at 84.7 FPS is also viable for users with high-refresh-rate 1440p monitors, but the data shows a 20% performance penalty compared to High. The Medium preset at 128.3 FPS is the best choice for competitive play or for those who prioritize frame rate over visual quality.

At 3840x2160, the options are more constrained. High settings at 61.3 FPS is the only preset that clears the 60 FPS threshold, making it the recommended choice for 4K. The Medium preset at 69.1 FPS is also acceptable, but the visual difference between Medium and High is typically more noticeable than the 11% frame rate gap. The Ultra preset at 47.2 FPS should be avoided unless the user is willing to accept sub-60 FPS gameplay for maximum visual fidelity.

For the best overall experience, the data suggests High settings at 1440p as the default recommendation. This configuration delivers 106 FPS, which is well above the 60 FPS target, and it preserves the visual features that make the game look its best. Users with 1080p displays can safely enable Ultra, as the 126.5 FPS result remains highly playable.

FAQ

Q: Can this combo run The Technomancer at 4K with playable frame rates?

A: Yes, but only at High settings, which averages 61.3 FPS. The Medium preset runs at 69.1 FPS, while the Ultra preset drops to 47.2 FPS, which is below the 60 FPS threshold.

Q: What is the best preset for 1440p gaming?

A: High settings at 2560x1440 delivers 106 FPS, making it the best balance of visual quality and performance. The Ultra preset runs at 84.7 FPS, which is still smooth, but High offers a 25% performance advantage.

Q: Is the CPU or GPU the limiting factor at 1080p?

A: The data suggests the CPU becomes relevant at lower settings. The Low preset at 1080p hits 250 FPS, which appears to be near the Ryzen 7 7800X3D's practical limit for this game, while the GPU has less work to do at such low graphical settings.

Q: How does the Ultra preset compare to High at 1080p?

A: The Ultra preset averages 126.5 FPS, while High averages 164.6 FPS. This is a 30% performance penalty for Ultra, which may be significant if you are targeting a high-refresh-rate display.

Q: Does the 12 GB VRAM capacity cause any issues in this game?

A: No. The benchmark data shows no signs of VRAM-related stuttering or performance degradation, even at 4K Ultra settings where the game is most demanding.

Q: What frame rate can I expect at 1440p with Medium settings?

A: The Medium preset at 2560x1440 averages 128.3 FPS, which is the highest result at that resolution among the tested presets.

How This Combo Ranks

This particular combination of AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 5070 ranks 309 out of 1656 tested combos in The Technomancer. This places it in the top 19% of all configurations, which is a strong result given the game's age and the modern hardware involved.

The ranking reflects the system's capability across the board. The CPU's 87th percentile ranking among all processors, with an average benchmark score of 31580, is closely matched by its nearest rivals. The Intel Core i7-12700F scores 31543 with a delta of just 0.1%, while the AMD Ryzen 9 5980HX scores 31495 with a delta of 0.3%. This indicates that the 7800X3D is not significantly ahead of its peers in general compute, but its 96 MB of shared L3 cache may provide specific advantages in gaming workloads.

The GPU's 83rd percentile ranking, with an average score of 41687, is similarly competitive. The nearest rival data shows the RTX 5070 is within 0.7% of the AMD Radeon Pro 580X (41991) and within 0.6% of the RTX 3090 (41441). This tight grouping means the combo's rank is not due to an exceptional GPU, but rather the combination of two strong components working together without a major bottleneck.

The rank of 309 out of 1656 means that roughly 80% of tested combos are slower in this game. This is a solid result for a modern mid-to-high-end pairing, and the measured FPS data confirms that the combo is capable of smooth gameplay at 1080p and 1440p with high settings.

CPU Role

The AMD Ryzen 7 7800X3D plays a supporting role in this game, but it is not irrelevant. With 8 cores and 16 threads based on the Zen 4 architecture, the CPU operates at a base clock of 4.20 GHz and a boost clock of 5.00 GHz. The 96 MB of shared L3 cache is the defining feature of this processor, and it likely helps maintain minimum frame rates in scenes with complex game logic.

The CPU's benchmark scores show it is a strong all-around performer. The Cinebench R23 multicore score of 29149 and single-core score of 4115 demonstrate solid computational power. The Geekbench multicore score of 15101 and single-core score of 2725 further confirm this. The Passmark multithread score of 34293, combined with a single-thread score of 3759, shows that the CPU handles both heavily threaded and lightly threaded workloads effectively.

In The Technomancer, the CPU's role becomes evident at 1080p with lower presets. The jump from Low to High at 1080p shows a 34% decrease in frame rate (250 to 164.6 FPS), but the gap between High and Ultra is only 23% (164.6 to 126.5 FPS). This suggests that the CPU is still feeding the GPU adequately even at the highest settings, and the frame rate differences are primarily driven by GPU load.

The CPU's 120 W TDP and 5 nm process node from TSMC indicate it is an efficient processor, though the power draw is not a factor in the benchmark results. The 83.2 GB/s memory bandwidth, paired with dual-channel DDR5 support, provides the data throughput needed to keep the GPU fed with geometry and draw calls. The 11,270 million transistors on a 71 mm² die show a dense design that delivers strong per-core performance.

The nearest rival data for the CPU shows it is not dramatically faster than its peers in synthetic benchmarks, but the 3D V-Cache technology, which provides the 96 MB of L3, likely contributes to gaming-specific performance that is not fully captured by general compute scores. The 0.1% delta over the Intel Core i7-12700F and 0.6% delta over the AMD Ryzen 7 8700G are small margins, but in a game like The Technomancer, the CPU is rarely the limiting factor at resolutions above 1080p.