The Technomancer

The Technomancer, a 2016 Action RPG, presents a demanding workload for modern hardware. This analysis examines the pairing of the AMD Ryzen 7 5800XT processor with the NVIDIA GeForce RTX 3060 Ti graphics card, using measured frame rate data across three resolutions and four quality presets. The data reveals a configuration that is capable at 1080p and 1440p, but which struggles to maintain playable frame rates at 4K with higher settings.

Resolution Scaling

The measured FPS data shows a clear and predictable decline as resolution increases, but the rate of that decline reveals where the system's bottleneck lies. At 1080p with High settings, the combo delivers an average of 95.8 FPS. Moving to 1440p drops that to 63.6 FPS, a reduction of roughly 34%. The jump to 4K is even more punishing, with High settings yielding only 32.5 FPS, a further 49% drop from the 1440p figure.

This steep curve indicates that the NVIDIA GeForce RTX 3060 Ti becomes the limiting factor as pixel count rises. At 1080p, the CPU has enough headroom to push frame rates well past 100 FPS on lower presets, but the GPU's workload scales dramatically with resolution. The difference between Low and Ultra settings at each resolution is also telling. At 1080p, the spread from Low (143 FPS) to Ultra (70.7 FPS) is roughly 72 FPS, showing significant GPU headroom. At 4K, the same spread is only 25.1 FPS (from 51.3 FPS on Low to 26.2 FPS on Ultra), confirming that the GPU is saturated and settings have less relative impact.

How This Combo Ranks

Within the benchmark database, this specific combination of the AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 3060 Ti ranks 1168 out of 1656 tested combos for The Technomancer. This places it in the lower third of all configurations tested, a ranking that reflects the game's age and the GPU's mid-range positioning rather than a deficiency in the CPU.

The GPU itself holds the 69th percentile among all tested graphics cards, while the CPU sits higher at the 86th percentile. This disparity in relative performance is a key insight: the Ryzen 7 5800XT is a strong processor that is not being fully utilized in this pairing. The data suggests that a more powerful GPU would likely improve the frame rate ceiling significantly, especially at higher resolutions where the RTX 3060 Ti is clearly the bottleneck. The CPU's nearest rivals, such as the AMD Ryzen 7 PRO 5755GE and the AMD Ryzen 7 7840H, have nearly identical average benchmark scores, but the frame rate results here are governed by the GPU.

Settings Recommendations

Based on the measured data, the optimal experience for this combo depends heavily on the target resolution. For 1440p gaming, the High preset at 63.6 FPS is the sweet spot, offering a solid balance of visual fidelity and smoothness. Dropping to Medium yields 72.7 FPS, a modest gain that might be preferable for players sensitive to frame pacing, but High provides a more visually complete experience.

At 1080p, the story is different. The High preset delivers 95.8 FPS, which is excellent for fast-paced action, but the Ultra preset at 70.7 FPS is still very playable and will provide the best image quality. For owners of 144Hz or 165Hz monitors, the Low preset at 143 FPS is the only way to approach maximum refresh rates, but the visual sacrifices are substantial. At 4K, no preset achieves a consistently smooth 60 FPS. The Low preset at 51.3 FPS is the most playable, but it negates the point of 4K resolution. The data strongly indicates that 4K gaming should be avoided with this configuration.

Measured FPS Breakdown

The following table presents the exact average frame rates measured for this configuration in The Technomancer.

| Resolution | Settings | Avg FPS |

| :--------- | :------- | ------: |

| 3840x2160 | Low | 51.3 |

| 3840x2160 | Medium | 41.1 |

| 3840x2160 | High | 32.5 |

| 3840x2160 | Ultra | 26.2 |

| 2560x1440 | Low | 95.3 |

| 2560x1440 | Medium | 72.7 |

| 2560x1440 | High | 63.6 |

| 2560x1440 | Ultra | 47.7 |

| 1920x1080 | Low | 143 |

| 1920x1080 | Medium | 107.9 |

| 1920x1080 | High | 95.8 |

| 1920x1080 | Ultra | 70.7 |

FAQ

Q: Can this combo run The Technomancer at 60 FPS on 1080p?

A: Yes, comfortably. The measured data shows 95.8 FPS on High and 107.9 FPS on Medium, with Ultra still exceeding 60 FPS at 70.7 FPS.

Q: Is 4K gaming viable with the Ryzen 7 5800XT and RTX 3060 Ti?

A: Not with high visual quality. The highest average FPS at 4K is 51.3 on Low settings. High and Ultra presets produce 32.5 FPS and 26.2 FPS respectively, which are below the threshold for smooth gameplay.

Q: What is the biggest performance bottleneck for this game at higher resolutions?

A: The data indicates the NVIDIA GeForce RTX 3060 Ti is the limiting component. The CPU's performance is less relevant as resolution increases, and the GPU's workload becomes the primary constraint.

Q: How does the CPU's overall performance compare to its closest rivals?

A: The Ryzen 7 5800XT has an average benchmark score of 29774. Its nearest rival, the AMD Ryzen 7 PRO 5755GE, scores 29740, representing a negligible 0.1% difference. The AMD Ryzen 7 7840H scores 29868, which is -0.3% relative to the 5800XT.

Q: What is the best settings preset for a 1440p monitor?

A: The High preset is recommended, as it provides 63.6 FPS. This offers a better balance of image quality and performance than the Medium (72.7 FPS) or Ultra (47.7 FPS) options.

Q: Is the Ryzen 7 5800XT a high-performance processor relative to others?

A: Yes. It holds the 86th percentile among all tested CPUs, placing it in the top 14% of processors in the database based on its average benchmark score.

CPU Role

The AMD Ryzen 7 5800XT is a Zen 3 architecture processor built on a 7 nm process. It features 8 cores and 16 threads, with a base clock of 3.80 GHz and a boost clock of 4.80 GHz. This configuration provides substantial multi-threaded capability, evidenced by a Cinebench R23 multi-core score of 23794 and a single-core score of 3359.

In The Technomancer, the CPU's role is primarily to feed the GPU with draw calls and game logic. At 1080p, the CPU's strength is evident: the FPS difference between Low and Medium settings (143 FPS vs 107.9 FPS) shows that the CPU can handle high frame rates without becoming the limiting factor. The 16 threads ensure that background tasks and the game's engine have ample resources. However, the game's dependence on the GPU becomes apparent at higher resolutions. The RTX 3060 Ti, with its 4864 shading units and 8 GB of GDDR6 memory, cannot maintain the same throughput as the resolution increases, making the CPU's high single-thread and multi-thread scores largely irrelevant to the final frame rate at 4K. The processor's 32 MB of L3 cache and dual-channel DDR4 memory support are sufficient for this workload, but they do not compensate for the GPU's performance ceiling.