The Technomancer

The Technomancer, a 2016 Action RPG, presents a demanding workload for the AMD Ryzen 7 5800X3D and AMD Radeon RX 570 combination. The measured frame rates across resolutions and settings reveal a system that is overwhelmingly constrained by the graphics card, with the CPU’s substantial capabilities providing a robust foundation that never becomes the primary bottleneck. The data indicates a clear hierarchy where GPU load dictates performance, and the results are best interpreted through the lens of the Radeon RX 570’s 4 GB memory buffer and Polaris architecture.

Resolution Scaling

The performance drop from 1080p to 4K is steep and consistent, a classic indicator of a GPU-bound scenario. At High settings, the average frame rate falls from 46.2 FPS at 1920x1080 to 28 FPS at 2560x1440, a reduction of 39.4%. The descent to 3840x2160 is even more punishing, with the average plummeting to 14.2 FPS, which is a 69.3% decrease from the 1080p figure. This dramatic scaling curve is the signature of a graphics card operating at its absolute limit, where the increase in pixel count directly translates into a nearly proportional increase in render time.

The pattern holds across all settings. At Low settings, the system manages 67.1 FPS at 1080p, but this drops to 47.2 FPS at 1440p and then to 26.2 FPS at 4K. The 4K result at Low is still higher than the 4K result at Ultra (26.2 vs 12.6 FPS), but the relative drop from 1080p to 4K is similar in magnitude. This consistency suggests that the limiting factor is the raw fillrate and shading throughput of the RX 570, not a specific setting or memory constraint. The data shows that the gap between Low and Ultra settings narrows as resolution increases, which further supports the idea that the GPU’s compute units are saturated at higher resolutions, leaving little headroom for settings to differentiate performance.

GPU Role

The AMD Radeon RX 570 is the definitive performance limiter in this pairing. Its specifications—4 GB of GDDR5 memory on a 256-bit bus with 224.0 GB/s of bandwidth—are the primary determinants of the frame rates observed. The 14 nm Polaris 20 chip, with 2048 shading units and a boost clock of 1244 MHz, delivers a 5.095 TFLOPS FP32 throughput. These figures are modest by modern standards, and the benchmark results reflect that. The 4 GB memory capacity is particularly relevant for The Technomancer at higher resolutions and detail levels, as the game’s texture and geometry demands can exceed this buffer, forcing the GPU to rely on slower data paths.

The GPU’s nearest rival comparisons, based on average benchmark scores, place it at a 74th percentile. It sits within 0.8% of the NVIDIA RTX 5070 Mobile and the AMD RX 7700 XT in synthetic benchmarks, though this is a statistical artifact of the aggregate scoring. In real-world gaming, the RX 570’s 4 GB frame buffer and older architecture are far less capable than those modern parts. The measured FPS in The Technomancer, specifically the 12.6 FPS at 4K Ultra, is a direct consequence of the GPU’s inability to handle the pixel fill and memory traffic demands. The card’s 150 W TDP and PCIe 3.0 x16 interface are adequate for its role, but they do not mitigate the fundamental performance ceiling.

How This Combo Ranks

Within the extensive database of tested CPU and GPU combinations, this pairing ranks 1566 out of 1656. This places it in the bottom 5.4% of all recorded systems, a position that underscores the imbalance between the high-end CPU and the entry-level GPU. The Ryzen 7 5800X3D is a top-tier processor, but its capabilities are almost entirely wasted in this configuration for The Technomancer, as the RX 570 prevents the system from approaching the frame rates the CPU could otherwise support.

The rank of 1566 is a direct consequence of the GPU’s limitations. In a game like The Technomancer, which is not known for being CPU-intensive, the processor’s 83rd percentile standing among all CPUs is irrelevant to the final outcome. The combo rank is effectively a measure of the GPU’s performance, and the data confirms this. The system is not capable of delivering a playable experience at 4K, with even Low settings producing only 26.2 FPS. At 1080p, the results are more reasonable, but the overall rank reflects the poor high-resolution performance that drags the average down.

Measured FPS Breakdown

The data provides a complete picture of the system’s performance across three resolutions and four quality presets. At 1920x1080, the system is marginally playable. Low settings yield an average of 67.1 FPS, which is smooth. Medium settings drop to 55.3 FPS, and High settings produce 46.2 FPS. Ultra settings, at 38 FPS, are the first sign of strain, but the game remains responsive. These numbers suggest that 1080p is the intended resolution for this hardware, with Low to High settings being viable depending on the user’s preference for visual fidelity versus frame rate.

Moving to 2560x1440, the GPU’s limitations become more pronounced. Low settings average 47.2 FPS, which is still playable, but High settings fall to 28 FPS, and Ultra settings drop to 23.2 FPS. The 1440p Medium result of 33.2 FPS is borderline, indicating that users would need to accept significant visual compromises to maintain a smooth experience. At 3840x2160, the system is overwhelmed. Low settings average 26.2 FPS, Medium drops to 21.8 FPS, High falls to 14.2 FPS, and Ultra is a slideshow at 12.6 FPS. None of these 4K results are suitable for actual gameplay, and the data clearly shows that 4K is not a viable option for this combination.

CPU Role

The AMD Ryzen 7 5800X3D is a formidable processor, with 8 cores and 16 threads based on the Zen 3 architecture. Its 96 MB of shared L3 cache is a distinctive feature that provides a significant advantage in games that are sensitive to cache latency. The CPU’s base clock of 3.40 GHz and boost clock of 4.50 GHz, combined with a 105 W TDP, allow it to deliver strong single-threaded and multi-threaded performance. Its benchmark scores, such as a Cinebench R23 multi-core score of 24063 and a single-core score of 3397, place it in the 83rd percentile of all CPUs.

In The Technomancer, the CPU’s role is to feed the GPU with draw calls and handle game logic. The 5800X3D is more than capable of this task, and its performance is never the limiting factor. The measured FPS at 1080p Low (67.1 FPS) is likely near the CPU’s maximum frame delivery rate for this game, but the GPU is still the bottleneck at higher settings and resolutions. The CPU’s nearest rivals, such as the Intel Core i9-11900K and AMD Ryzen 5 7600, have comparable average benchmark scores (within 0.2%), but this has no impact on the gaming results here. The processor’s 16 threads are sufficient for the game’s multithreaded workload, but the RX 570’s 4 GB memory and 2048 shading units are simply not enough to produce high frame rates, particularly at 1440p and 4K. The data confirms that upgrading the GPU would yield far greater performance gains than any CPU change.