Archeage
This combination offers playable performance with an average of 30 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 13 | 15 | 19 | 24 |
| 1440p QHD | 15 | 23 | 37 | 40 |
| 1080p Full HD | 24 | 37 | 56 | 63 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 7 5800X3D + AMD Radeon RX 570, In-Depth Analysis
The AMD Ryzen 7 5800X3D and AMD Radeon RX 570 combination presents a stark contrast in capabilities: a top-tier 2022 processor paired with a 2017 entry-level graphics card. In Archeage, the benchmark data shows this pairing lands near the bottom of the charts, ranking 1678 out of 1727 tested combos. The results are clear: the GPU is the decisive bottleneck, and the system's performance is constrained by the RX 570 at every resolution and settings level tested.
Resolution Scaling
The FPS drop from 1080p to 4K is severe and tells a definitive story about where the system's limits lie. At 1080p with Low settings, the combo averages 62.7 FPS, which is the only playable result across the entire test matrix. Moving to 1440p at the same Low settings drops the average to 39.5 FPS, a substantial 37% reduction. At 4K with Low settings, the average falls to 23.6 FPS, which is less than half of the 1080p result. This steep, nearly linear decline with resolution indicates the rendering workload is almost entirely on the GPU, and the RX 570 simply cannot sustain high throughput at higher pixel counts.
The pattern holds across all settings presets. At High settings, the average FPS goes from 36.6 at 1080p, to 23.2 at 1440p, and down to 15.1 at 4K. The gap between 1080p and 4K is consistent, with the 4K result being roughly 59% lower than the 1080p result for High, Medium, and Low presets. This scaling behavior is characteristic of a GPU-bound scenario, where the CPU's role diminishes as the pixel count increases, and the graphics card's fill rate and memory bandwidth become the limiting factors. The data shows no sign of a CPU ceiling being hit at lower resolutions, as the FPS still scales with resolution rather than plateauing.
GPU Role
The AMD Radeon RX 570 is the clear performance limiter in this pairing. Its specifications, including a 4 GB GDDR5 memory pool on a 256-bit bus with 224.0 GB/s bandwidth, are insufficient for the demands of Archeage at higher resolutions. The GPU's boost clock of 1244 MHz and base clock of 1168 MHz, along with its 2048 shading units, provide a baseline of compute power, but the data suggests this is not enough. The card's average benchmark score of 30158 places it in the 74th percentile of all GPUs, which sounds respectable, but its nearest rivals include the NVIDIA GeForce RTX 5060 and AMD Radeon RX 7700 XT, with deltaPct values of 0.2 and 0.2 respectively. This indicates that the RX 570 is scoring in the same range as modern mid-range cards in synthetic benchmarks, but its real-world gaming performance in this specific title is poor.
The VRAM is another critical factor. With 4 GB of memory, the card is likely exceeding its capacity in Archeage at 4K, especially on Ultra settings where the average FPS drops to 12.7. The data shows that even at 1440p, Ultra settings produce an average of only 15 FPS, which is barely a slideshow. This suggests that the combination of high-resolution textures and effects is overwhelming the memory subsystem. The GPU's memory clock of 1750 MHz (7 Gbps effective) and its 256-bit bus provide decent bandwidth for its era, but it is not sufficient for modern game data loads at higher resolutions.
How This Combo Ranks
The combo's position in the global ranking is dire. With a rank of 1678 out of 1727 combos, it sits in the bottom 3% of all tested systems for Archeage. This is a verdict on the GPU, not the CPU. The AMD Ryzen 7 5800X3D is a formidable processor, scoring in the 83rd percentile of all CPUs with an average benchmark score of 26574. Its nearest rivals include the Intel Core i9-11900K and AMD Ryzen 5 7600, with deltaPct values of 0.1 and -0.2 respectively. This places the 5800X3D in the same performance echelon as other high-end desktop and mobile processors.
The juxtaposition of a top-tier CPU with a bottom-tier GPU result is the key story here. The CPU's potential is completely untapped in this scenario. The data shows that even with a powerful processor, the overall system performance is dragged down by the graphics card. This ranking is a clear indicator that for Archeage, the GPU is the sole determinant of playability, and the 5800X3D's 8 cores and 16 threads provide no benefit when the GPU is saturated. The combo rank is a reflection of the weakest link, and that link is the RX 570.
FAQ
Q: What is the best average FPS this combo can achieve in Archeage?
A: The highest average FPS recorded is 62.7, which is achieved at 1920x1080 resolution with Low settings.
Q: Is this combo capable of playing Archeage at 4K?
A: The data shows it is not. At 4K, the average FPS ranges from 23.6 on Low settings to 12.7 on Ultra settings, all of which are below playable thresholds.
Q: How does the CPU's performance compare to its rivals?
A: The Ryzen 7 5800X3D has an average benchmark score of 26574, which is 0.1% higher than the Intel Core i9-11900K and 0.2% higher than the AMD EPYC 8024P. It is 0.2% lower than the AMD Ryzen 5 7600.
Q: What is the GPU's standing relative to other graphics cards?
A: The RX 570 has an average benchmark score of 30158, which is 0.2% higher than the NVIDIA GeForce RTX 5060 and 0.2% higher than the AMD Radeon RX 7700 XT. It is 0.6% higher than the NVIDIA Tesla M60.
Q: Does the CPU's 3D V-Cache help in this game?
A: The data does not show a benefit. The combo ranks 1678 out of 1727, indicating that the CPU's cache is not a factor in overcoming the GPU's limitations in Archeage.
Q: What is the FPS difference between 1080p and 1440p on High settings?
A: The average FPS drops from 36.6 at 1080p to 23.2 at 1440p on High settings, a reduction of 13.4 FPS.
Settings Recommendations
The measured data provides a clear hierarchy of playability. For a smooth experience, the only viable option is 1080p with Low settings, which yields 62.7 FPS. This is the only configuration that exceeds the 60 FPS threshold. The next step up, 1080p Medium, drops to 55.5 FPS, which is borderline but may be acceptable for some players. 1080p High is significantly worse at 36.6 FPS, and 1080p Ultra is unplayable at 23.8 FPS.
At 1440p, the situation is grim. Low settings provide 39.5 FPS, which is playable but not ideal. Medium settings are close at 37.3 FPS, but High drops to 23.2 FPS, and Ultra is a non-starter at 15 FPS. At 4K, no settings preset yields a playable result, with the highest being 23.6 FPS on Low. The recommendation is to use 1080p Low if targeting maximum fluidity. If a visual upgrade is desired, 1080p Medium is the highest settings preset that keeps the average FPS above 50. Any attempt to play at 1440p or 4K will result in a sub-30 FPS experience on most presets, which is unsuitable for an MMORPG.
CPU Role
The AMD Ryzen 7 5800X3D is a high-end desktop processor with 8 cores and 16 threads, based on the Zen 3 architecture. Its base clock is 3.40 GHz and it boosts to 4.50 GHz. In synthetic benchmarks, it shows its strength: a Cinebench R23 multi-core score of 24063 and a single-core score of 3397. Its Geekbench multi-core score is 11061, and its Passmark multithread score is 28309. These numbers place it in the 83rd percentile of all CPUs, making it a top-tier performer for CPU-bound tasks.
However, in Archeage, the CPU's role is largely irrelevant to the measured FPS. The data shows that the system is GPU-bound at all tested settings. The CPU's performance is not the limiting factor; the RX 570 is. The 5800X3D's 96 MB of shared L3 cache and its high single-thread performance would be beneficial in CPU-bound scenarios, but the GPU's inability to render frames fast enough masks these advantages. The benchmark results show that this combo's rank of 1678 is a GPU-driven outcome, not a CPU one. The processor is simply waiting on the graphics card to deliver frames.
Measured FPS Breakdown
The complete set of measured average FPS values is as follows:
At 1920x1080, the results are: Low 62.7 FPS, Medium 55.5 FPS, High 36.6 FPS, and Ultra 23.8 FPS.
At 2560x1440, the results are: Low 39.5 FPS, Medium 37.3 FPS, High 23.2 FPS, and Ultra 15.0 FPS.
At 3840x2160, the results are: Low 23.6 FPS, Medium 19.4 FPS, High 15.1 FPS, and Ultra 12.7 FPS.
These numbers show a consistent pattern: each increase in resolution or settings tier results in a significant reduction in frame rate. The gap between Low and Ultra is substantial at every resolution. At 1080p, the difference is 38.9 FPS. At 1440p, it is 24.5 FPS. At 4K, it is 10.9 FPS. The data also shows that the relative performance drop from 1080p to 4K is most pronounced on High settings, where the FPS falls by 21.5 FPS, representing a 58.7% reduction. This breakdown confirms that the RX 570 is overwhelmed by the demands of Archeage at higher visual fidelity, making the 1080p Low preset the only configuration that delivers a consistently playable experience.
Hardware Specifications
AMD Ryzen 7 5800X3D
AMD Radeon RX 570
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5800X3D + AMD Radeon RX 570 in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 23.6 |
| 3840x2160 | Medium | 19.4 |
| 3840x2160 | High | 15.1 |
| 3840x2160 | Ultra | 12.7 |
| 2560x1440 | Low | 39.5 |
| 2560x1440 | Medium | 37.3 |
| 2560x1440 | High | 23.2 |
| 2560x1440 | Ultra | 15.0 |
| 1920x1080 | Low | 62.7 |
| 1920x1080 | Medium | 55.5 |
| 1920x1080 | High | 36.6 |
| 1920x1080 | Ultra | 23.8 |
Archeage with Ryzen 7 5800X3D + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RX 570 + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 7 5800X3D + RX 570
Explore FPS benchmarks for other games using this same hardware combination.