The Technomancer
This combination offers playable performance with an average of 34 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 11 | 17 | 22 | 22 |
| 1440p QHD | 22 | 31 | 35 | 43 |
| 1080p Full HD | 37 | 45 | 53 | 71 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Technomancer with AMD Ryzen 7 5700X3D + AMD Radeon RX 570, In-Depth Analysis
The AMD Ryzen 7 5700X3D paired with the AMD Radeon RX 570 produces a playable experience in The Technomancer only at 1080p, with performance collapsing at higher resolutions. The data shows a stark 4K Ultra average of 11.1 FPS, which is unplayable, while the 1080p Low preset reaches 70.9 FPS. This combination ranks at 1592 out of 1656 tested combos, placing it in the bottom 4% of all pairings, a position driven almost entirely by the GPU's limits rather than the CPU's capabilities.
Resolution Scaling
The FPS drop from 1080p to 4K is severe and reveals a system bottlenecked by the graphics card. At Low settings, the average frame rate falls from 70.9 FPS at 1920x1080 to 42.6 FPS at 2560x1440, a 39.9% reduction. Pushing further to 3840x2160 Low yields only 22 FPS, which is a 69% drop from the 1080p result. This scaling pattern is characteristic of a GPU-limited scenario, where the rendering load outpaces the Polaris 20 chip's capabilities.
The High preset tells a similar story. At 1080p, the average is 44.6 FPS, which drops to 30.5 FPS at 1440p (a 31.6% decline) and then to 17.2 FPS at 4K (a 61.4% decline from 1080p). The Ultra preset is the most demanding, yielding 36.6 FPS at 1080p, 21.8 FPS at 1440p, and a dismal 11.1 FPS at 4K. The consistent halving of performance at each resolution step-up indicates that the RX 570's 224.0 GB/s memory bandwidth and 5.095 TFLOPS of FP32 compute are simply insufficient for the pixel counts at 1440p and above.
Notably, the gap between Low and Medium settings at 4K is negligible (22 FPS vs 21.9 FPS), suggesting that at this resolution, the GPU is so saturated that the small difference in shading load between these presets barely registers. The data indicates that 1080p is the only viable resolution for this combo, and even there, only the Low and Medium presets approach smoothness.
CPU Role
The AMD Ryzen 7 5700X3D provides ample processing power for this title, making the GPU the sole limiting factor. This 8-core, 16-thread processor based on Zen 3 architecture has a base clock of 3.00 GHz and a boost clock of 4.10 GHz. Its large 96 MB shared L3 cache is a key asset for gaming workloads. In synthetic benchmarks, the CPU scores 22366 in Cinebench R23 multi-core and 3157 in single-core, with a Passmark multithread score of 26318.
These CPU numbers are far in excess of what The Technomancer requires, as evidenced by the fact that frame rates plummet uniformly across all settings at higher resolutions. If the CPU were the bottleneck, we would expect to see less variation between Low and Ultra presets at a given resolution. Instead, the data shows that at 1080p, the difference between Low (70.9 FPS) and Ultra (36.6 FPS) is a massive 34.3 FPS, directly attributable to GPU rendering load.
The CPU's 82nd percentile ranking among all CPUs, with an average benchmark score of 24673, places it just 0.2% ahead of the Intel Core i7-1360P and 0.3% ahead of the AMD Ryzen 5 7600X3D. This suggests the processor is more than capable of feeding the GPU in this game. The bottleneck is clear: the RX 570's 4 GB of GDDR5 memory and 2048 shading units are overwhelmed by the game's demands, not the CPU's ability to process game logic.
FAQ
Q: Is this combination capable of running The Technomancer at 4K?
A: No. The measured data shows the average FPS at 3840x2160 ranges from 11.1 FPS on Ultra to 22 FPS on Low. All of these results are below playable thresholds, indicating the GPU cannot handle 4K rendering in this title.
Q: What is the best resolution for this CPU-GPU pairing?
A: 1920x1080 is the only resolution that yields playable frame rates. The data shows 70.9 FPS on Low and 52.8 FPS on Medium at 1080p. At 2560x1440, even the Low preset only achieves 42.6 FPS, and the High preset drops to 30.5 FPS.
Q: How does this combo rank compared to other tested systems?
A: The combination ranks 1592nd out of 1656 tested combos in The Technomancer. This places it in the bottom 4.2% of all tested system pairings, reflecting the GPU's entry-level status.
Q: Is the CPU or GPU more responsible for the performance results?
A: The GPU is the limiting component. The Ryzen 7 5700X3D's benchmark scores (e.g., 22366 in Cinebench R23 multi-core) are far higher than needed, while the RX 570's performance drops dramatically with resolution, from 70.9 FPS at 1080p Low to 22 FPS at 4K Low, indicating a clear GPU bottleneck.
Q: What is the difference in performance between Low and Ultra settings at 1080p?
A: The difference is substantial. The average FPS at 1920x1080 is 70.9 FPS on Low, 52.8 FPS on Medium, 44.6 FPS on High, and 36.6 FPS on Ultra. This represents a 48.4% performance drop from Low to Ultra.
Q: Does the RX 570's 4 GB VRAM impact the results?
A: The 4 GB GDDR5 memory, paired with a 256-bit bus and 224.0 GB/s bandwidth, is a likely contributor to the severe performance degradation at 1440p and 4K. The high-resolution data shows average FPS figures below 43 even on Low settings, consistent with memory capacity or bandwidth limitations.
Settings Recommendations
The measured FPS data dictates a clear settings strategy for this hardware. At 1920x1080, the Low preset is the only configuration that consistently exceeds 60 FPS, achieving 70.9 FPS. This is the best choice for players prioritizing smoothness and responsiveness. The Medium preset at 52.8 FPS is a viable alternative for those who want better visual fidelity while staying above 50 FPS, though it represents a 25.5% performance hit compared to Low.
The High preset at 1080p yields 44.6 FPS, which is playable but not ideal for fast-paced action. The Ultra preset at 36.6 FPS is the least recommended, as the visual gains over High are unlikely to justify the 18% performance drop. At 2560x1440, no preset is fully playable; the Low setting at 42.6 FPS is marginal, and the Ultra setting at 21.8 FPS is not recommended. The 4K resolution should be avoided entirely, as even the Low preset at 22 FPS produces a stuttering experience.
The data indicates that the best experience is achieved at 1080p with Low or Medium settings. For a balanced approach, Medium at 1080p offers a 52.8 FPS average, which is acceptable for an Action RPG. The key takeaway is to avoid High and Ultra presets at any resolution above 1080p, as the GPU's performance ceiling is quickly reached.
How This Combo Ranks
This system is positioned at the very bottom of the performance hierarchy for The Technomancer. The combo rank of 1592 out of 1656 tested combinations places it in the 4th percentile, meaning only 64 tested systems perform worse. This ranking is a direct reflection of the RX 570's limitations, as the CPU's 82nd percentile ranking among all CPUs indicates it is not the weak link.
The CPU's nearest rivals include the Intel Core i7-1360P (0.2% lower average score) and the AMD Ryzen 5 7600X3D (0.3% lower), while the GPU's nearest rivals include the NVIDIA GeForce RTX 5060 (0.2% higher average score) and the AMD Radeon RX 7700 XT (0.2% higher). These narrow margins in synthetic benchmarks highlight that the CPU is competitive with modern parts, but the GPU's 74th percentile ranking among all GPUs is dragged down by its age and 4 GB memory configuration.
In practical terms, this combo will struggle with any modern AAA title at high resolutions, and The Technomancer is no exception. The ranking suggests that users should expect 1080p performance only, with the understanding that the system is near the bottom of the tested pool. The data confirms that this is not a balanced pairing for demanding games, but rather a legacy setup that can handle older titles at modest settings.
Measured FPS Breakdown
The measured frame rates provide a complete picture of the system's capabilities across all settings and resolutions. At 1920x1080, the average FPS is 70.9 on Low, 52.8 on Medium, 44.6 on High, and 36.6 on Ultra. These figures show a consistent step-down as settings increase, with the Low preset being the only one to clear the 60 FPS threshold.
Moving to 2560x1440, the averages drop to 42.6 on Low, 34.5 on Medium, 30.5 on High, and 21.8 on Ultra. The scaling from 1080p to 1440p results in a 39.9% reduction on Low, a 34.7% reduction on Medium, a 31.6% reduction on High, and a 40.4% reduction on Ultra. This uniform decline across settings reinforces the GPU-bound nature of the system.
At 3840x2160, the results are as follows: 22 FPS on Low, 21.9 FPS on Medium, 17.2 FPS on High, and 11.1 FPS on Ultra. The difference between Low and Medium at 4K is a mere 0.1 FPS, indicating that the GPU is saturated at this resolution regardless of the modest settings change. The drop from 1440p to 4K is 48.4% on Low, 36.5% on Medium, 43.6% on High, and 49.1% on Ultra. These numbers confirm that 4K is not viable for this hardware, and even 1440p requires significant compromises.
GPU Role
The AMD Radeon RX 570 is the definitive bottleneck in this configuration. This Polaris 20 chip, built on the GCN 4.0 architecture using a 14 nm process at GlobalFoundries, has 2048 shading units, 128 TMUs, and 32 ROPs. Its base clock of 1168 MHz and boost clock of 1244 MHz provide a peak FP32 compute of 5.095 TFLOPS. The 4 GB of GDDR5 memory runs at 1750 MHz (7 Gbps effective) across a 256-bit bus, delivering 224.0 GB/s of bandwidth.
These specifications are dated, and the benchmark results reflect this. The GPU's average benchmark score of 30158 places it at the 74th percentile, with its nearest rival, the NVIDIA GeForce RTX 5060, scoring only 0.2% higher. However, this aggregate score does not translate to playable performance in The Technomancer at high resolutions. The measured FPS data shows that the GPU's performance degrades sharply with increased resolution, from 70.9 FPS at 1080p Low to 22 FPS at 4K Low.
The 4 GB VRAM is a particular concern. The Technomancer, released in 2016, likely exceeds this capacity at higher settings and resolutions, causing texture thrashing and severe frame rate drops. The 256-bit memory bus provides adequate bandwidth for 1080p, but the sheer pixel count at 1440p and 4K overwhelms the available memory and compute resources. The data indicates that the RX 570 is a capable 1080p card for older games, but it is outclassed by the demands of higher resolutions in this title. The GPU's end-of-life production status and 150 W TDP further underscore its legacy positioning, making it the clear weak link in this pairing.
Hardware Specifications
AMD Ryzen 7 5700X3D
AMD Radeon RX 570
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700X3D + AMD Radeon RX 570 in The Technomancer
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 22.0 |
| 3840x2160 | Medium | 21.9 |
| 3840x2160 | High | 17.2 |
| 3840x2160 | Ultra | 11.1 |
| 2560x1440 | Low | 42.6 |
| 2560x1440 | Medium | 34.5 |
| 2560x1440 | High | 30.5 |
| 2560x1440 | Ultra | 21.8 |
| 1920x1080 | Low | 70.9 |
| 1920x1080 | Medium | 52.8 |
| 1920x1080 | High | 44.6 |
| 1920x1080 | Ultra | 36.6 |
The Technomancer with Ryzen 7 5700X3D + Other GPUs
See how The Technomancer performs with the same CPU but different graphics cards.
The Technomancer with RX 570 + Other CPUs
See how The Technomancer performs with the same GPU but different processors.
Other Games with Ryzen 7 5700X3D + RX 570
Explore FPS benchmarks for other games using this same hardware combination.