The Technomancer

# The Technomancer: AMD Ryzen 7 5700X + NVIDIA GeForce RTX 2060

The Technomancer, a 2016 Action RPG, remains a demanding title for modern hardware, and the pairing of AMD's Ryzen 7 5700X with NVIDIA's GeForce RTX 2060 delivers a mixed bag of results. The measured frame rates show a system that excels at 1080p, remains playable at 1440p with settings adjustments, but struggles to maintain acceptable performance at 4K. Across the twelve measured data points, this combination demonstrates a clear GPU-bound behavior at higher resolutions, while the CPU's 8-core, 16-thread configuration proves more than adequate for the game's engine at lower settings.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals a classic GPU-limited scenario. At High settings, the average FPS drops from 85.4 at 1920x1080 to 55.8 at 2560x1440, a substantial 34.7% reduction, and then plummets to 27.8 at 3840x2160 — a further 50.2% decline from the 1440p figure. This steep degradation pattern indicates that the RTX 2060's 6 GB GDDR6 memory and TU106 chip are the primary bottlenecks as pixel count rises.

The Low preset tells a similar story but with higher absolute numbers. The 1080p Low result of 128.3 FPS falls to 83 at 1440p and 47.9 at 4K. The percentage drops are 35.3% and 42.3% respectively, showing that even when graphical load is minimized, the GPU's raw throughput limits scaling. Interestingly, the gap between Low and High settings narrows as resolution increases: at 1080p the difference is 42.9 FPS, at 1440p it is 27.2 FPS, and at 4K it shrinks to 20.1 FPS. This compression suggests that at 4K, the pixel fill rate and memory bandwidth of the RTX 2060 — rated at 336.0 GB/s — become the dominant constraint, overshadowing the impact of individual settings.

The Medium preset occupies a middle ground, with 97.6 FPS at 1080p, 64.3 at 1440p, and 38.3 at 4K. The Ultra preset, which demands the most from the hardware, yields 65.5 FPS at 1080p, 45.3 at 1440p, and a nearly unplayable 24.9 at 4K. The data clearly shows that the transition from 1440p to 4K is the most punishing, with average frame rate reductions exceeding 45% across all four presets. This indicates that any user targeting 4K with this combination would need to accept significant compromises, as even the Low preset fails to reach 60 FPS at that resolution.

FAQ

Q: What is the best resolution for this CPU/GPU combo in The Technomancer?

A: Based on the measured data, 1920x1080 is the only resolution where this combination achieves consistently high frame rates. At 1080p, even the Ultra preset delivers 65.5 FPS average, while Low reaches 128.3 FPS. At 1440p, only the Low preset (83 FPS) and Medium preset (64.3 FPS) stay above the 60 FPS threshold.

Q: How does the RTX 2060 compare to its nearest rival in terms of raw GPU score?

A: The RTX 2060 has an average benchmark score of 16074, placing it 0.5% ahead of the AMD Radeon RX 7600S (15996) and 1.8% ahead of the AMD Radeon Pro W5500 (15786). It trails the AMD Radeon Pro 5600M and AMD Radeon Pro 5700 by 1.7%, which both score 16351.

Q: Is the Ryzen 7 5700X a bottleneck for the RTX 2060 in this game?

A: The data suggests no significant CPU bottleneck. The Ryzen 7 5700X scores 921 in 3dmark_single_thread and 6858 in 3dmark_16_threads, placing it in the 83rd percentile of all CPUs. The frame rate scaling pattern, with consistent drops as resolution increases, indicates the GPU is the limiting factor at higher resolutions.

Q: What is the frame rate difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset averages 83 FPS while Ultra averages 45.3 FPS. This represents a 37.7 FPS difference, or a 45.4% reduction in performance when moving from the lowest to the highest quality settings.

Q: Can this combo handle 4K gaming in The Technomancer?

A: Not comfortably. At 3840x2160, even the Low preset only achieves 47.9 FPS average. The High preset drops to 27.8 FPS, Medium to 38.3 FPS, and Ultra to 24.9 FPS. None of the measured 4K configurations reach the 60 FPS target.

Q: How does the CPU's multi-threaded performance compare to its single-thread score?

A: The Ryzen 7 5700X shows strong scaling, with a 3dmark_max_threads score of 6850 versus 921 in single-thread. In Cinebench R23, the multicore score is 22620 compared to 3193 single-core, representing a 7.1x improvement that reflects the 8-core, 16-thread design.

Settings Recommendations

For the smoothest experience, the Low preset at 1080p delivers 128.3 FPS average, which is more than sufficient for the game's combat mechanics. However, this leaves significant visual quality on the table. The High preset at 1080p, with 85.4 FPS average, represents the best balance between visual fidelity and performance, maintaining a comfortable margin above 60 FPS while providing substantial graphical improvements over Low.

At 1440p, the Medium preset is the optimal choice, delivering 64.3 FPS average. This stays above the 60 FPS threshold while offering better image quality than the Low preset's 83 FPS. The High preset at 1440p (55.8 FPS) is playable but dips below the ideal frame rate, and the Ultra preset (45.3 FPS) should be avoided for competitive or fast-paced sections.

For 4K, the data does not support any preset for a consistently smooth experience. The Low preset's 47.9 FPS average is the only configuration above 30 FPS, but it still falls short of playable standards for most users. Given the RTX 2060's specifications — 6 GB of GDDR6 memory, 1920 shading units, and a 192-bit memory bus — this card is simply not designed for 4K gaming in this title. Users with 4K displays should consider lowering resolution to 1440p and using the Medium preset, which yields 64.3 FPS, for the best overall experience.

How This Combo Ranks

This specific combination of AMD Ryzen 7 5700X and NVIDIA GeForce RTX 2060 ranks 1369 out of 1656 tested combos in The Technomancer. This places it in the lower 17.4% of all tested configurations, indicating that while this hardware is competent for many titles, it underperforms relative to the broader benchmark database in this specific game. The rank reflects the measured frame rates across all resolutions and presets, and the 4K results particularly drag down the overall standing.

The RTX 2060 itself sits in the 58th percentile of all GPUs, with an average benchmark score of 16074. This is a mid-pack position, but the card's nearest rivals — the AMD Radeon RX 7600S (15996, 0.5% faster), AMD Radeon Pro 5600M (16351, 1.7% slower), and AMD Radeon Pro W5500 (15786, 1.8% faster) — all cluster within a narrow performance band. The Ryzen 7 5700X, by contrast, ranks in the 83rd percentile of all CPUs with an average score of 26214, placing it well above the GPU's relative standing. This disparity suggests the GPU is the weaker link in this pairing, a conclusion reinforced by the resolution scaling data.

The combination's low rank of 1369 out of 1656 (17.4th percentile) does not necessarily indicate poor absolute performance — the 1080p results are solid — but it does show that many other tested combinations deliver higher frame rates in The Technomancer. The game's 2016 release date and its demands on GPU memory bandwidth likely penalize the 6 GB RTX 2060 more heavily than newer cards with larger memory pools.

CPU Role

The AMD Ryzen 7 5700X provides 8 cores and 16 threads based on the Zen 3 architecture, codenamed Vermeer. It operates at a base clock of 3.40 GHz with a boost clock of 4.60 GHz, and includes 32 MB of shared L3 cache plus 512 KB of L2 cache per core. The processor's 3dmark results show strong scaling from 1821 in 2-thread testing to 6858 in 16-thread testing, and its Cinebench R23 multicore score of 22620 demonstrates robust multi-threaded capability.

In The Technomancer, the CPU's role appears secondary to the GPU's performance. The frame rate data shows a consistent pattern where higher resolutions produce lower FPS across all presets, which is the hallmark of GPU-bound rendering. The Ryzen 7 5700X's single-thread performance — 921 in 3dmark_single_thread and 3193 in Cinebench R23 single-core — is more than adequate for the game's engine, which likely does not heavily utilize more than a few threads given its 2016 release.

The 4,150 million transistors on a 74 mm² die at 7 nm process node give the CPU excellent efficiency, with a 65 W TDP. This low power draw means thermal throttling is unlikely to affect sustained performance in gaming scenarios. The processor's 83rd percentile ranking among all CPUs reinforces that it is not a limiting factor in this pairing. Even at 1080p Low, where the system achieves 128.3 FPS, the CPU's 16 threads ensure that any game logic, AI, or physics calculations are handled without introducing frame pacing issues. The data indicates that users seeking higher frame rates in The Technomancer should focus on GPU upgrades rather than CPU replacement, as the 5700X already provides ample headroom for this title.