Doom

The AMD Ryzen 7 5700X and NVIDIA GeForce RTX 2060 pairing delivers a playable but not overpowering experience in Doom, with the data showing a clear shift from CPU-bound performance at lower resolutions to GPU-bound performance as resolution climbs. This is a classic mid-range combo where the 8-core processor ensures headroom, but the 6 GB graphics card ultimately dictates the ceiling at higher settings.

Resolution Scaling

The measured FPS data shows a steep performance drop as resolution increases from 1920x1080 to 3840x2160, which is the expected pattern for a system where the GPU becomes the primary bottleneck at higher pixel counts. At 1920x1080 with High settings, the combo averages 130.4 FPS, but that figure falls to 80.5 FPS at 2560x1440 — a reduction of roughly 38%. Jumping to 3840x2160 High brings the average down to 46.1 FPS, which is 65% lower than the 1080p result.

The scaling pattern indicates that at 1080p, the CPU still has some influence on the frame rate, but by 1440p the GPU is clearly the limiting factor. The delta between Low and Ultra settings at each resolution reinforces this: at 1080p, Low produces 174 FPS while Ultra drops to 106.4 FPS, a gap of 67.6 FPS. At 1440p, the same settings gap narrows to 45.2 FPS (110.6 vs 65.4), and at 4K it shrinks further to 24.7 FPS (60.2 vs 35.5). This tightening spread at higher resolutions is the signature of a GPU-limited scenario — the graphics card is working at maximum capacity, so reducing settings yields diminishing returns.

For practical use, this means 1080p is the sweet spot for high refresh rate monitors, as even Ultra settings clear 100 FPS. At 1440p, players can expect solid performance on Medium or High, but Ultra will dip below the 70 FPS mark. 4K remains a stretch, with only Low settings achieving the 60 FPS threshold, and Ultra falling to an uncomfortable 35.5 FPS average.

CPU Role

The Ryzen 7 5700X brings 8 cores and 16 threads, running at a base clock of 3.40 GHz and boosting to 4.60 GHz. This is a Zen 3 part built on TSMC's 7 nm process, with 32 MB of shared L3 cache. In synthetic benchmarks, the chip scores 921 in 3dmark_single_thread and 6858 in 3dmark_16_threads, showing balanced single-core and multi-core strength.

For Doom, the CPU's single-thread performance is more relevant than raw core count, since the game engine is known for scaling across multiple threads but still benefits from strong per-core speed. The 5700X's 3dmark_4_threads score of 3512 suggests it can handle the game's primary thread workload without becoming a bottleneck at 1080p. The data supports this: at 1920x1080 Low, the combo reaches 174 FPS, which is high enough that the CPU must be feeding frames efficiently.

The CPU's percentile ranking of 83 against all tested processors places it above the majority of alternatives. Its nearest rival, the Intel Core i9-11900KF, scores nearly identically in average benchmark score (26196 vs 26214, a delta of just 0.1%), meaning the 5700X offers essentially the same computational headroom for this game. The AMD Ryzen 5 7600X is also within 0.2% of the 5700X's average score, indicating that Doom does not heavily penalize the 5700X despite it being an older generation part.

GPU Role

The NVIDIA GeForce RTX 2060 is a Turing architecture card with 6 GB of GDDR6 memory on a 192-bit bus, delivering 336.0 GB/s of bandwidth. Its boost clock is 1680 MHz, and it features 1920 shading units, 120 TMUs, and 48 ROPs. The memory clock runs at 1750 MHz (14 Gbps effective). In synthetic testing, the GPU scores 14111 in passmark_g3d and 5488 in passmark_gpu_compute, placing it in the 58th percentile of all GPUs.

The 6 GB VRAM capacity is a notable constraint at 4K Ultra settings. While the measured data does not explicitly indicate memory overflow, the sharp drop from 55.3 FPS at Medium to 35.5 FPS at Ultra at 3840x2160 suggests the card is struggling with the combined load of higher resolution and increased texture detail. At 1080p, the VRAM is sufficient, as evidenced by the 106.4 FPS average at Ultra settings.

Compared to its nearest rivals, the RTX 2060's average benchmark score of 16074 is just 0.5% higher than the AMD Radeon RX 7600S (15996) and 1.8% higher than the AMD Radeon Pro W5500 (15786). The AMD Radeon Pro 5700 scores 16351, which is 1.7% higher, but that card is not a direct consumer gaming counterpart. For Doom, the RTX 2060's performance is adequate for 1080p and 1440p gaming, but the 4K results show it is out of its depth at Ultra settings.

How This Combo Ranks

The combo holds the rank of 1381 out of 1681 tested combinations in Doom, placing it in the lower half of the database. This ranking reflects the RTX 2060's age and mid-range positioning rather than a CPU deficiency — the 5700X is a capable processor that would not bottleneck a faster GPU in this title. The percentile data for the CPU (83rd) versus the GPU (58th) illustrates this asymmetry: the processor is a stronger component relative to its peers than the graphics card.

The rank of 1381 suggests that many other pairings deliver higher frame rates in Doom, primarily due to more powerful GPUs. However, the combo still achieves playable performance at 1080p and 1440p, which is the practical takeaway for a system built around these two components. The data indicates that upgrading the GPU would yield a more significant performance boost than swapping the CPU, given the 5700X's strong benchmark scores.

Measured FPS Breakdown

At 1920x1080, the RTX 2060 and Ryzen 7 5700X produce an average of 174 FPS on Low settings, 154.8 FPS on Medium, 130.4 FPS on High, and 106.4 FPS on Ultra. These numbers show a smooth progression, with each settings tier costing roughly 20-25 FPS. The 174 FPS Low result indicates that the CPU is capable of feeding very high frame rates, and the GPU is not entirely maxed out at this resolution.

At 2560x1440, the averages drop to 110.6 FPS on Low, 101.4 FPS on Medium, 80.5 FPS on High, and 65.4 FPS on Ultra. The gap between Low and Medium narrows to 9.2 FPS, while the jump from Medium to High costs 20.9 FPS. Ultra remains playable at 65.4 FPS, which is above the 60 FPS threshold for smooth gameplay.

At 3840x2160, performance falls to 60.2 FPS on Low, 55.3 FPS on Medium, 46.1 FPS on High, and 35.5 FPS on Ultra. Only Low settings maintain an average above 60 FPS, and Ultra produces a frame rate that would be noticeable choppy on a standard 60 Hz display. The delta between Low and Ultra at 4K is 24.7 FPS, which is the smallest absolute difference across all three resolutions, confirming that the GPU is the limiting factor.

FAQ

*Q: Can this combo run Doom at 60 FPS on 1080p Ultra settings?*

A: Yes. The measured average FPS at 1920x1080 with Ultra settings is 106.4, which is well above the 60 FPS threshold.

*Q: What is the best resolution for this pairing in Doom?*

A: 1920x1080 is the most comfortable, as even Ultra settings deliver 106.4 FPS. At 2560x1440, High settings produce 80.5 FPS, which is still playable, but Ultra drops to 65.4 FPS.

Q: Is the Ryzen 7 5700X or the RTX 2060 the bottleneck in this game?

A: The GPU is the bottleneck at higher resolutions. The CPU's benchmark scores (e.g., 6858 in 3dmark_16_threads) are strong, while the GPU's passmark_g3d score of 14111 places it in the 58th percentile, and FPS scaling shows diminishing returns from settings changes at 4K.

Q: How does this combo rank compared to other tested systems?

A: It ranks 1381 out of 1681 combinations in Doom, placing it in the lower half. The CPU ranks in the 83rd percentile, but the GPU's 58th percentile ranking pulls the overall combo down.

Q: What FPS can I expect at 1440p with High settings?

A: The measured average is 80.5 FPS at 2560x1440 with High settings. This is smooth for most displays, though not suitable for 144 Hz monitors at that refresh rate.

*Q: Is 6 GB of VRAM enough for 4K gaming in Doom?*

A: The data shows playable results only at Low settings (60.2 FPS) at 3840x2160. At Ultra settings, the average drops to 35.5 FPS, suggesting the 6 GB capacity and overall GPU compute are insufficient for high-detail 4K play.