The Technomancer

# The Technomancer with AMD Ryzen 5 7600X + NVIDIA GeForce RTX 2060

The AMD Ryzen 5 7600X paired with the NVIDIA GeForce RTX 2060 delivers a playable but resolution-sensitive experience in The Technomancer, a 2016 Action RPG. The measured frame rates across three resolutions and four quality presets show a system that is clearly GPU-bound at higher resolutions, while the CPU's strong single-thread performance keeps 1080p results competitive. This combination ranks 2911 out of 3696 tested combos in this game, placing it in the lower-middle tier of the database.

Resolution Scaling

The frame rate progression from 1920x1080 to 3840x2160 reveals a steep performance curve that is characteristic of a GPU-limited scenario. At High settings, the average frame rate drops from 85 FPS at 1080p to 56 FPS at 1440p, then further to 31 FPS at 4K. This represents a 63.5% reduction from 1080p to 4K, indicating that the RTX 2060's rendering throughput is the primary constraint as pixel count quadruples.

The scaling pattern is consistent across all settings presets. At Low settings, the system achieves 130 FPS at 1080p, 85 FPS at 1440p, and 47 FPS at 4K. The 4K result at Low settings is still higher than the 1080p result at Ultra (66 FPS), which suggests that the game's visual effects at Ultra impose a heavier load than the additional resolution alone. This is notable because it shows the RTX 2060 has enough raw pixel throughput for 4K at minimal quality settings, but the game's higher presets push the GPU beyond its comfort zone.

The Medium preset tells a similar story with min/max frame data available. At 3840x2160 Medium, the average is 36 FPS with a minimum of 30 FPS and maximum of 41 FPS. At 2560x1440 Medium, those figures rise to 65 average, 55 minimum, and 75 maximum. The 1080p Medium result reaches 100 average, 85 minimum, and 115 maximum. The min-to-max spread widens slightly at higher resolutions (11 FPS at 4K vs. 20 FPS at 1080p), but the relative stability remains acceptable.

The data indicates that the limiting component shifts with resolution. At 1080p, the Ryzen 5 7600X's six cores with a 4.70 GHz base clock and 5.30 GHz boost clock are sufficient to feed the RTX 2060, as evidenced by the 130 FPS Low result. By 1440p, the GPU begins to saturate, and at 4K, the RTX 2060's 6 GB GDDR6 memory and 336.0 GB/s bandwidth become the clear bottleneck. The CPU's 3DMark single-thread score of 1060 and Cinebench R23 single-core score of 1965 suggest it has ample headroom for this 2016 title.

FAQ

Q: What is the best resolution for smooth gameplay with this combo?

A: Based on the measured data, 1920x1080 provides the most consistent experience. At High settings, the average FPS is 85, and at Medium it reaches 100 FPS. Even at Ultra, 1080p maintains 66 FPS average, which is above the common 60 FPS threshold.

Q: How does the RTX 2060 perform at 4K in The Technomancer?

A: The 4K results are marginal. At Low settings, the average is 47 FPS, which is playable. At Medium, the average drops to 36 FPS with a 30 FPS minimum. High settings yield 31 FPS, and Ultra falls to 24 FPS. Only the Low preset approaches acceptable smoothness at 4K.

Q: Is the Ryzen 5 7600X holding back the RTX 2060 in this game?

A: The data suggests no significant CPU bottleneck. The 1080p Low result of 130 FPS indicates the CPU can drive high frame rates, and its benchmark scores (Cinebench R23 multi-core 15236, Geekbench single-core 2603) are strong. The GPU becomes the limiting factor at higher resolutions.

Q: What is the difference between Low and Ultra settings at 1440p?

A: At 2560x1440, Low averages 85 FPS, while Ultra averages 43 FPS. That is a 42 FPS difference, representing a 49.4% performance drop when moving from the lowest to the highest quality preset.

Q: How does this combo compare to other tested configurations?

A: This combination ranks 2911 out of 3696 combos in The Technomancer, placing it in the 21st percentile of tested systems. The RTX 2060 itself sits at the 58th percentile among all GPUs, while the Ryzen 5 7600X ranks at the 79th percentile among CPUs.

Q: Does the RTX 2060 support ray tracing in this game?

A: The RTX 2060 includes 30 RT cores and supports DirectX 12 Ultimate (12_2), but The Technomancer was released in 2016, before ray tracing became a common feature. The game's measured results do not include any ray tracing-specific data.

GPU Role

The NVIDIA GeForce RTX 2060 is the central component in determining this combo's performance in The Technomancer. Its 6 GB of GDDR6 memory on a 192-bit bus provides 336.0 GB/s of bandwidth, which proves adequate for 1080p and 1440p but becomes strained at 4K Ultra settings. The GPU's 1920 shading units, 120 texture mapping units, and 48 raster output pipelines deliver a texture rate of 201.6 GTexel/s and a pixel rate of 80.64 GPixel/s.

The clock behavior of the RTX 2060 is relevant to the measured results. With a base clock of 1365 MHz and a boost clock of 1680 MHz, the GPU maintains consistent performance across the tested presets. The memory runs at 1750 MHz with a 14 Gbps effective data rate. These specifications place the RTX 2060 at the 58th percentile among all GPUs in the database, with an average benchmark score of 15290.

The GPU's nearest rivals in the database provide context for its performance tier. The NVIDIA GeForce GTX 580 has an average score of 15283, a 0% delta from the RTX 2060. The AMD Radeon 680M scores 15270, just 0.1% lower. The NVIDIA GeForce RTX 3050 OEM reaches 15199, 0.6% lower, and the AMD Radeon RX 7600 scores 15171, 0.8% lower. This clustering shows the RTX 2060 sits in a tightly packed performance band where small differences separate competitors.

In The Technomancer specifically, the GPU's VRAM capacity plays a notable role. The 6 GB frame buffer is sufficient for 1080p and 1440p at all settings, as evidenced by the playable frame rates. At 4K Ultra, the 24 FPS average suggests the GPU is both bandwidth-limited and potentially VRAM-constrained, though the exact allocation is not recorded in the measured data. The game's 2016 release date means it was designed for GPUs of that era, so the RTX 2060's modern architecture with 12 nm process and 10,800 million transistors should handle the DirectX 12 workload efficiently.

Settings Recommendations

The measured data provides clear guidance for optimal settings based on the target resolution and desired frame rate. At 1920x1080, the Medium preset offers the best balance, with an average of 100 FPS and a minimum of 85 FPS. This leaves headroom for occasional frame drops while maintaining smooth gameplay. The High preset at 85 FPS is also viable, but the jump from Medium to High costs 15 FPS on average. Ultra at 66 FPS remains above 60 FPS, but the margin is thinner.

For 2560x1440, the Medium preset again stands out. The 65 FPS average with a 55 FPS minimum provides consistent performance that meets the 60 FPS target in most scenarios. The High preset drops to 56 FPS average, which is borderline for smooth play. Low settings at 85 FPS are the safest choice for competitive or fast-paced sections, but the visual quality trade-off may not be worth it for a single-player Action RPG.

At 3840x2160, the options are limited. The Low preset at 47 FPS is the only setting that approaches playability, though it still falls short of 60 FPS. The Medium preset at 36 FPS with a 30 FPS minimum is playable but will exhibit noticeable stuttering in demanding scenes. High at 31 FPS and Ultra at 24 FPS are not recommended for comfortable gameplay. Users prioritizing 4K should accept Low settings or lower the resolution.

The Ultra preset consistently delivers the lowest frame rates across all resolutions, with a 66 FPS at 1080p, 43 FPS at 1440p, and 24 FPS at 4K. The visual improvement from High to Ultra does not justify the performance cost in most cases, as the frame rate drops by 19 FPS at 1080p and 13 FPS at 1440p. The Medium preset appears to be the sweet spot for this hardware combination, offering a 64.5% improvement over Ultra at 1080p and a 51.2% improvement at 1440p.

Measured FPS Breakdown

The complete measured FPS data for this combination covers three resolutions and four settings presets, providing a comprehensive picture of performance.

At 1920x1080, the results are consistently strong. Low settings produce an average of 130 FPS, which is the highest measured result in the entire dataset. Medium settings average 100 FPS with a minimum of 85 FPS and a maximum of 115 FPS, showing a 30 FPS spread. High settings average 85 FPS, and Ultra settings average 66 FPS. The progression from Low to Ultra shows a step-down pattern: 130 to 100 to 85 to 66, with each preset costing between 15 and 30 FPS.

At 2560x1440, the frame rates drop proportionally. Low settings average 85 FPS, which matches the 1080p High result. Medium settings average 65 FPS with a minimum of 55 FPS and a maximum of 75 FPS. High settings average 56 FPS, and Ultra settings average 43 FPS. The gap between Low and Ultra is 42 FPS, representing a 49.4% reduction from the lowest to the highest preset.

At 3840x2160, the performance becomes marginal. Low settings average 47 FPS, Medium averages 36 FPS with a minimum of 30 FPS and a maximum of 41 FPS, High averages 31 FPS, and Ultra averages 24 FPS. The difference between Low and Ultra is 23 FPS, which is a 48.9% reduction. The min/max data for Medium shows a tight 11 FPS range, indicating consistent frame pacing even at lower performance levels.

Comparing across resolutions at the same settings reveals the scaling costs. At Medium settings, the average FPS drops from 100 at 1080p to 65 at 1440p (35% reduction) and then to 36 at 4K (44.6% reduction from 1440p). At High settings, the progression is 85 to 56 to 31, with reductions of 34.1% and 44.6% respectively. At Low settings, the progression is 130 to 85 to 47, with reductions of 34.6% and 44.7%. The consistent percentage drops across presets suggest the RTX 2060's scaling behavior is predictable and resolution-bound rather than settings-bound.

CPU Role

The AMD Ryzen 5 7600X provides the computational foundation for this combination. With 6 cores and 12 threads based on the Zen 4 architecture, this 5 nm processor from TSMC operates at a base clock of 4.70 GHz and a boost clock of 5.30 GHz. The 32 MB of shared L3 cache, along with 64 KB L1 and 1 MB L2 per core, ensures the CPU can feed data to the GPU efficiently.

The CPU's benchmark performance demonstrates its capability for gaming workloads. In Cinebench R23, it scores 15236 multi-core and 1965 single-core. The Geekbench scores are 13858 multi-core and 2603 single-core. The 3DMark results show scaling from 1060 single-thread to 6879 at 16 threads, with 4-thread and 8-thread scores of 3796 and 5715 respectively. The PassMark single-thread score of 4135 and multithread score of 28390 further establish its strong per-core performance.

The Ryzen 5 7600X ranks at the 79th percentile among all CPUs, with an average benchmark score of 27636. Its nearest rivals are tightly clustered: the AMD Ryzen 7 5700X scores 27578 (0.2% higher), the Intel Core i5-12600K scores 27578 (0.2% higher), the AMD Ryzen 5 8500GE scores 27712 (0.3% lower), and the AMD Ryzen 7 5800 scores 27535 (0.4% higher). This places the 7600X in a competitive performance tier where the differences between CPUs are minimal.

In The Technomancer, the CPU's role is less critical than the GPU's, as the game was released in 2016 and likely does not utilize more than a few cores effectively. The 1080p Low result of 130 FPS demonstrates that the CPU can sustain high frame rates when the GPU is not the limiting factor. The single-thread performance, as indicated by the 3DMark single-thread score of 1060 and Cinebench R23 single-core of 1965, is sufficient for the game's main thread workload. The 12 threads provide headroom for background tasks and any multi-threaded game systems, though the measured data does not isolate CPU-specific bottlenecks.

How This Combo Ranks

The AMD Ryzen 5 7600X and NVIDIA GeForce RTX 2060 combination ranks 2911 out of 3696 tested combos in The Technomancer, placing it in the 21.2% percentile of the database. This is a low-to-mid ranking, reflecting the RTX 2060's modest performance tier relative to modern GPUs.

The ranking makes sense given the components' individual positions. The CPU ranks at the 79th percentile among all CPUs, which is a strong position. The GPU ranks at the 58th percentile among all GPUs, which is below average. Since The Technomancer is a GPU-intensive title at higher resolutions, the GPU's lower percentile drags the combo ranking down. The 3696 total combos include many with more powerful GPUs paired with similar or weaker CPUs, which would outperform this configuration in this game.

The combo's ranking of 2911 means 785 tested combinations performed worse. This places the system in the lower third of all tested configurations. For a 2016 game, this is expected: modern mid-range GPUs like the RTX 2060 are not optimized for the game's engine, and the 6 GB VRAM is modest by current standards.

The data shows that this combo is best suited for 1080p gaming in The Technomancer, where it achieves strong frame rates across all settings. At 1440p, it remains playable at Medium settings. At 4K, only Low settings approach playability. Users with this hardware should prioritize resolution over visual quality, as the GPU's limitations become pronounced at higher pixel counts. The CPU's high percentile ranking ensures it will not be the bottleneck in most scenarios, but the GPU's lower percentile means it will limit the overall experience in this title.