The Technomancer

The AMD Ryzen 5 7600 paired with the AMD Radeon RX 6800 XT delivers a performance profile in The Technomancer that is heavily dictated by resolution. At 1080p, the combination produces very high frame rates, but the margin between settings narrows and the overall headroom shifts as pixel count increases. The data reveals a system that is capable of smooth gameplay at 1440p but begins to strain at 4K, particularly when image quality is maximized. This analysis breaks down the measured results across all twelve data points, examining how the CPU and GPU interact under varying loads.

Resolution Scaling

The frame rate drop from 1920x1080 to 3840x2160 is substantial, indicating that the GPU becomes the primary limiting factor as resolution climbs. At High settings, the average FPS falls from 142.4 at 1080p to 93.2 at 1440p, a reduction of roughly 35%. Moving from 1440p to 4K at High settings yields another significant decline, with the average dropping to 48.9 FPS. This pattern shows a clear scaling curve where each step up in resolution imposes a heavier load on the Radeon RX 6800 XT, which has 16 GB of GDDR6 memory and a 256-bit bus width.

The scaling behavior at Low settings is even more revealing. At 1080p Low, the system achieves 216.1 FPS, but this drops to 139.6 at 1440p and then to 78.7 at 4K. The percentage drop from 1080p to 4K at Low settings is about 64%, while the drop from 1080p to 1440p is around 35%. This suggests that even at the lowest settings, the GPU is still the bottleneck at higher resolutions, as the CPU's 6 cores and 12 threads are sufficient to feed the graphics card at these frame rates.

At Ultra settings, the trend intensifies. The average FPS at 1080p is 113.1, which falls to 70.4 at 1440p and then to 41.4 at 4K. The gap between Low and Ultra at 4K is substantial—78.7 FPS versus 41.4 FPS—indicating that the higher preset demands significantly more from the GPU. The data shows that the RX 6800 XT, with its boost clock of 2250 MHz and 4608 shading units, can handle 1440p High with ease but struggles to maintain 60 FPS at 4K Ultra.

CPU Role

The Ryzen 5 7600, a 6-core, 12-thread processor based on Zen 4 architecture, plays a supportive role in these results. Its base clock of 3.80 GHz and boost clock of 5.10 GHz provide strong single-thread performance, as reflected in its Cinebench R23 single-core score of 3246. In The Technomancer, which is not heavily multithreaded, the CPU's performance is unlikely to be the bottleneck, especially at lower resolutions where the GPU is already delivering high frame rates.

The CPU's multi-core capabilities, shown in its Cinebench R23 multi-core score of 22992, are more than adequate for this title. At 1080p Low, where the system reaches 216.1 FPS, the CPU is still able to keep up, indicating that the 5.10 GHz boost clock is sufficient for the game's logic. The processor's 32 MB of shared L3 cache also helps in maintaining smooth frame delivery, though the measured data does not isolate CPU-specific bottlenecks.

Compared to its nearest rivals, the Ryzen 5 7600 sits close to the AMD Ryzen 7 5800X3D, with a delta of 0.2% in average benchmark score. This proximity suggests that the 7600's performance in this game would be similar to that of the 5800X3D, though the latter has a different cache configuration. The CPU's 83rd percentile ranking among all CPUs further confirms that it is a capable processor for gaming, but the Technomancer results show that the GPU is the dominant factor in determining frame rates.

FAQ

Q: What is the average FPS at 1440p High settings?

A: The measured average FPS at 2560x1440 with High settings is 93.2.

Q: How does the 4K Ultra performance compare to 1080p Ultra?

A: At 3840x2160 Ultra, the average FPS is 41.4, while at 1920x1080 Ultra, it is 113.1. This represents a drop of approximately 63% when moving from 1080p to 4K at the same preset.

Q: Is the CPU or GPU more likely to be the bottleneck at 1080p Low?

A: At 1080p Low, the system achieves 216.1 FPS, which is very high. Given the CPU's 5.10 GHz boost clock and the GPU's 2250 MHz boost clock, the data suggests the GPU is still the limiting factor, as the frame rate is well above what most displays can show.

Q: What is the difference in average FPS between Low and Ultra at 1440p?

A: At 2560x1440, the Low preset delivers 139.6 FPS, while Ultra delivers 70.4 FPS. This is a difference of 69.2 FPS, or about 49% lower performance at Ultra.

Q: Does the system maintain 60 FPS at 4K Medium?

A: Yes, at 3840x2160 with Medium settings, the average FPS is 62.1, which is just above the 60 FPS threshold.

Q: How does the RX 6800 XT's performance here compare to its nearest rival?

A: The RX 6800 XT has an average benchmark score of 49982, which is 0.5% higher than the Intel Arc A550M's score of 49737. However, this is a general benchmark comparison, not specific to The Technomancer.

Measured FPS Breakdown

At 1920x1080, the frame rates are consistently high across all settings. The Low preset produces an average of 216.1 FPS, which is the highest measured value in the entire dataset. Medium settings yield 163.9 FPS, High settings yield 142.4 FPS, and Ultra settings yield 113.1 FPS. The spread between Low and Ultra at 1080p is 103 FPS, showing that the GPU has ample headroom at this resolution.

Moving to 2560x1440, the averages drop but remain playable. Low settings produce 139.6 FPS, Medium produces 107 FPS, High produces 93.2 FPS, and Ultra produces 70.4 FPS. The gap between Low and Ultra narrows to 69.2 FPS, indicating that the GPU is starting to feel the load of higher pixel counts.

At 3840x2160, the performance becomes more constrained. Low settings deliver 78.7 FPS, Medium delivers 62.1 FPS, High delivers 48.9 FPS, and Ultra delivers 41.4 FPS. The difference between Low and Ultra at 4K is 37.3 FPS, which is the smallest absolute spread across all resolutions, but the percentage drop from Low to Ultra is about 47%. This data shows that 4K gaming requires compromises in settings to maintain a smooth experience.

How This Combo Ranks

This combination of the AMD Ryzen 5 7600 and AMD Radeon RX 6800 XT ranks 582nd out of 1656 tested combos in The Technomancer. This places it in the upper third of all configurations, indicating that the system performs above average for this title. The rank reflects the balance between the CPU and GPU, with the RX 6800 XT's strong 87th percentile among all GPUs being a major contributor to the overall standing.

The CPU's 83rd percentile ranking among all CPUs further supports the idea that this is a well-matched pair for gaming. The combination's rank of 582 suggests that there are many systems with more powerful GPUs or CPUs that can achieve higher frame rates, particularly at 4K. However, for 1080p and 1440p gaming, this combo is clearly positioned to deliver high frame rates, as evidenced by the measured data.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution. At 1920x1080, Ultra settings are the best choice, as the average FPS of 113.1 is well above the 60 FPS threshold and provides the highest image quality. Even at 1080p Ultra, the system has enough headroom for a smooth experience.

For 2560x1440, High settings offer a strong balance, with an average FPS of 93.2. This provides a significant improvement over Medium’s 107 FPS, but the jump to Ultra at 70.4 FPS is still playable. For those prioritizing frame rate, High is recommended, as it delivers nearly 60% more performance than Ultra while maintaining a high level of visual fidelity.

At 3840x2160, the data suggests that Medium settings are the most practical. The average FPS of 62.1 at Medium is just above the 60 FPS target, making it the only preset at 4K that achieves this. Low settings produce 78.7 FPS but with reduced visual quality, while High and Ultra fall below 50 FPS. The recommendation is to use Medium at 4K for a stable experience, with Low as an option for those who prefer higher frame rates.