The Technomancer

The AMD Ryzen 5 7500X3D and AMD Radeon RX 9060 combination delivers a consistent, playable experience in The Technomancer, though the data reveals a clear performance ceiling that shifts based on resolution. This pairing ranks in the 42nd percentile of tested configurations, with benchmark results indicating that the GPU becomes the primary constraint as resolution scales upward.

Resolution Scaling

The measured FPS data shows a predictable and steep decline as resolution increases from 1920x1080 to 3840x2160. At High settings, the average frame rate drops from 103 FPS at 1080p to 67 FPS at 1440p, a 35% reduction, and then further to 37 FPS at 4K, representing a 64% total drop from the 1080p baseline. This pattern strongly suggests that the AMD Radeon RX 9060’s rendering throughput is the limiting factor at higher resolutions, rather than the CPU.

Examining the Low settings row reinforces this conclusion. The 1080p Low average of 157 FPS falls to 102 FPS at 1440p and 56 FPS at 4K. The fact that even at the lowest graphical preset, the 4K result is only 56 FPS—while the 1080p result is nearly three times higher—indicates that the GPU’s pixel fillrate and memory bandwidth are being saturated. If the CPU were the bottleneck, we would expect to see less dramatic scaling between resolutions, as the processor’s workload remains relatively constant regardless of pixel count.

The Medium settings data provides additional granularity. Here, the average FPS at 1080p is 120, dropping to 79 at 1440p and 43 at 4K. The minimum FPS values at Medium are telling: 102 FPS at 1080p, 67 FPS at 1440p, and 37 FPS at 4K. These minimums track closely with the average FPS of the High preset at the same resolutions, suggesting that frame pacing remains stable across settings and that the GPU is consistently the throughput limiter.

CPU Role

The AMD Ryzen 5 7500X3D is a 6-core, 12-thread processor from the 7000 series, built on the Zen 4 Raphael architecture using a 5 nm process. It operates with a base clock of 4.00 GHz and a boost clock of 4.50 GHz, with a 65 W TDP. Its cache configuration includes 64 KB of L1 per core, 1 MB of L2 per core, and a substantial 96 MB of shared L3 cache.

In terms of synthetic CPU benchmarks, this processor achieves a Passmark single-thread score of 3494 and a multithread score of 25047. Its average benchmark score is 44573, which places it at the 89th percentile of all CPUs tested. The nearest rivals in this metric are the Intel Core Ultra X9 388H with an average score of 44466 (0.2% slower), the Intel Core i9-13950HX at 44342 (0.5% slower), and the AMD Ryzen AI Max 385 at 44309 (0.6% slower). The Intel Core i5-14600 scores 44889, which is 0.7% higher.

For The Technomancer, a game from 2016, the CPU’s role is to maintain a stable frame delivery without stuttering. The data shows that at 1080p Low, the average FPS reaches 157, which is likely near the engine’s internal frame rate cap or the point where the GPU is no longer the primary constraint. The fact that the CPU can push frame rates above 150 FPS at lower resolutions demonstrates that its 6 cores and 12 threads are sufficient for this title’s threading model. The large 96 MB L3 cache may help with data locality, but the benchmark results primarily indicate that the CPU does not bottleneck the system until well above 100 FPS.

How This Combo Ranks

The combined configuration of the AMD Ryzen 5 7500X3D and AMD Radeon RX 9060 achieves a rank of 1632 out of 2825 tested combos for The Technomancer. This places the pairing in the lower-middle tier of all tested systems, which is consistent with the GPU’s performance profile. For context, the RX 9060’s average benchmark score is 16014, putting it at the 59th percentile of all GPUs, while the CPU is at the 89th percentile.

This rank suggests that the overall gaming experience is more heavily weighted toward the GPU’s capabilities. The CPU is a high-end part, but the GPU is positioned as a mid-range option. In a game like The Technomancer, which appears to be GPU-bound at higher resolutions (as shown by the steep scaling curve), the combo rank reflects that the GPU holds back the system from achieving higher placements. At 1080p, the relatively high FPS numbers suggest the combo could rank higher in lighter scenes, but the aggregate rank accounts for all measured conditions.

Measured FPS Breakdown

At 1920x1080, the data shows a wide range of performance across settings. The Low preset yields an average of 157 FPS, which is the highest measured value for this combo. Medium averages 120 FPS with a minimum of 102 and a maximum of 138. High averages 103 FPS, and Ultra averages 80 FPS. The gap between Low and Ultra is 77 FPS, or roughly a 50% reduction, indicating that the visual fidelity settings have a significant impact on the GPU load.

Moving to 2560x1440, the averages are as follows: Low at 102 FPS, Medium at 79 FPS (min 67, max 90), High at 67 FPS, and Ultra at 52 FPS. The scaling from 1080p to 1440p at the same settings shows a reduction of 55 FPS for Low (157 to 102), 41 FPS for Medium (120 to 79), 36 FPS for High (103 to 67), and 28 FPS for Ultra (80 to 52). This diminishing absolute drop with higher settings is characteristic of a GPU that hits its memory bandwidth limit.

At 3840x2160, the results are: Low at 56 FPS, Medium at 43 FPS (min 37, max 50), High at 37 FPS, and Ultra at 29 FPS. The 4K Ultra result of 29 FPS is below the 30 FPS threshold often considered the minimum for playability, while 4K High at 37 FPS is borderline. The 4K Low at 56 FPS is the only 4K setting that provides a comfortable margin above 60 FPS, though it is still well below the 1080p Low result.

GPU Role

The AMD Radeon RX 9060 is based on the Navi 44 chip with RDNA 4.0 architecture, manufactured on a 4 nm process at TSMC. It features 8 GB of GDDR6 memory on a 128-bit bus, providing a memory bandwidth of 288.0 GB/s. The GPU has a base clock of 1700 MHz, a game clock of 2400 MHz, and a boost clock of 2990 MHz, with a 132 W TDP.

The GPU’s memory configuration is critical to understanding its performance in The Technomancer. With only 8 GB of VRAM and a 128-bit bus, the RX 9060’s bandwidth of 288 GB/s is moderate. The benchmark data shows that performance drops significantly at 4K, where the demand for memory bandwidth increases substantially. The gap between 1080p High (103 FPS) and 4K High (37 FPS) is 64%, which is a larger relative drop than would be expected if the GPU were purely compute-bound, suggesting that the memory subsystem is a limiting factor.

In synthetic benchmarks, the RX 9060 achieves a Passmark G3D score of 17631 and a GPU compute score of 9919. Its nearest rivals are the NVIDIA GeForce RTX 3060 Ti with an average score of 16129 (0.7% higher), the AMD Radeon R9 370X at 15862 (1% lower), the AMD Radeon RX 7700 at 15852 (1% lower), and the AMD Radeon Pro W5500 at 15679 (2.1% lower). This places the RX 9060 in a performance tier that is competitive with the RTX 3060 Ti, which is a GPU from a previous generation.

Settings Recommendations

Given the measured FPS data, the optimal settings depend heavily on the target resolution and desired frame rate. For 1920x1080, the Ultra preset delivers an average of 80 FPS, which is excellent for a smooth experience. If higher frame rates are preferred, the High preset at 103 FPS offers a significant boost with likely minimal visual degradation. The Medium preset at 120 FPS is also viable, and the Low preset at 157 FPS is available for competitive or high-refresh-rate displays.

At 2560x1440, the High preset provides an average of 67 FPS, which is suitable for most players, and the Medium preset at 79 FPS is a solid alternative for those who prefer a higher frame rate. The Ultra preset at 52 FPS is playable but may feel less smooth in action-heavy scenes. The Low preset at 102 FPS is the best choice for players who prioritize frame rate over visual quality.

For 3840x2160, the data indicates that the Ultra preset at 29 FPS is not recommended due to sub-30 FPS averages. The High preset at 37 FPS is marginally playable, but the Medium preset at 43 FPS is a better balance, providing a playable experience without dropping to the lowest visual settings. The Low preset at 56 FPS is the only 4K setting that approaches a 60 FPS target, though it sacrifices significant visual fidelity.

In summary, the High preset is the recommended default for 1080p and 1440p, as it offers a strong balance of visual quality and performance. For 4K, users should opt for the Medium preset to maintain playable frame rates, or drop to Low if they require a smoother experience.

FAQ

Q: What is the average FPS at 1080p with High settings?

A: The average FPS at 1920x1080 with High settings is 103.

Q: How does the combo rank compare to other tested configurations?

A: The AMD Ryzen 5 7500X3D and AMD Radeon RX 9060 combination ranks 1632 out of 2825 tested combos for The Technomancer.

Q: Which 4K setting provides the highest average FPS?

A: The Low preset at 3840x2160 provides the highest average FPS for this combo, achieving 56 FPS.

Q: What is the minimum FPS recorded at 1440p Medium settings?

A: The minimum FPS at 2560x1440 with Medium settings is 67.

Q: How does the CPU’s multithread score compare to its nearest rival?

A: The Ryzen 5 7500X3D has a multithread score of 25047, and its nearest rival, the Intel Core Ultra X9 388H, has an average benchmark score of 44466, which is 0.2% lower than the Ryzen’s average score of 44573.

Q: What is the GPU’s memory bandwidth and how does it affect 4K performance?

A: The GPU has a memory bandwidth of 288.0 GB/s with 8 GB of GDDR6 memory. This bandwidth appears to be a limiting factor at 4K, as the average FPS at 4K High is 37, compared to 103 at 1080p High.