Archeage
This combination provides smooth gameplay with an average of 71 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 33 | 49 | 55 |
| 1440p QHD | 39 | 58 | 85 | 95 |
| 1080p Full HD | 58 | 86 | 126 | 142 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 5 7500X3D + AMD Radeon RX 9060, In-Depth Analysis
The AMD Ryzen 5 7500X3D and AMD Radeon RX 9060 combination delivers a playable yet distinctly resolution-sensitive experience in Archeage, a 2014 MMORPG. The measured data shows a clear progression from a fluid 1080p experience to a struggle at 4K, with the GPU becoming the dominant limiting factor as resolution climbs. This pairing ranks in the 58th percentile of tested combos for this title, indicating it sits slightly above the midpoint of the database’s tested configurations.
Resolution Scaling
The frame rate drop from 1080p to 4K is steep and consistent across all settings, revealing a system that is heavily bound by the graphics card at higher resolutions. At High settings, the average frame rate falls from 86 FPS at 1920x1080 to 58 FPS at 2560x1440, a reduction of 28 FPS or roughly 33%. Pushing further to 3840x2160, the average drops to 33 FPS, which is a 62% decline from the 1080p figure. This scaling pattern indicates that the Radeon RX 9060’s rendering throughput is the primary constraint as pixel count increases, with the CPU’s role diminishing at higher resolutions.
The Low preset tells a similar story but with higher absolute numbers. At 1080p Low, the combo achieves 142 FPS average, which drops to 95 FPS at 1440p and then to 55 FPS at 4K. The percentage drop from 1080p to 4K is about 61%, nearly identical to the High preset’s scaling. This consistency suggests that the relative performance penalty for moving to 4K is largely independent of the graphics settings, pointing to a fixed GPU bottleneck rather than a settings-dependent issue.
Medium settings show the most complete data, with minimum and maximum frame rates recorded at every resolution. At 1080p Medium, the average is 126 FPS with a minimum of 107 FPS and a maximum of 145 FPS. Moving to 1440p Medium, the average falls to 85 FPS, with a range of 72 to 98 FPS. At 4K Medium, the average is 49 FPS, with a minimum of 41 FPS and a maximum of 56 FPS. The scaling from 1080p to 1440p is a 32.5% drop, and from 1440p to 4K is a further 42.4% drop. The 4K minimum of 41 FPS is notably low, indicating that even the Medium preset can produce stutter-prone moments at that resolution.
Ultra settings produce the lowest frame rates across the board, but the scaling pattern remains the same. At 1080p Ultra, the average is 58 FPS. This falls to 39 FPS at 1440p and then to 23 FPS at 4K. The 1080p-to-4K decline is 60%, again mirroring the other presets. The 4K Ultra result of 23 FPS is essentially unplayable for a smooth experience, and even the 1440p Ultra figure of 39 FPS sits below what most users would consider comfortable for an MMORPG.
The data indicates that the 7500X3D’s 6 cores and 12 threads, combined with its 96 MB of shared L3 cache, are more than sufficient to feed the GPU at 1080p, where the 142 FPS Low result suggests the CPU is not the limiting factor. However, at 4K, the GPU’s 8 GB of GDDR6 memory and 128-bit bus become the bottleneck, as evidenced by the sharp frame rate declines. The scaling from 1080p to 1440p is less severe than from 1440p to 4K at Medium and High settings, indicating that the GPU’s memory bandwidth and compute resources are progressively overwhelmed as resolution increases.
Settings Recommendations
Based on the measured data, the optimal balance of visual quality and playability for this combo in Archeage is the Medium preset at 1920x1080 or 2560x1440. At 1080p Medium, the average frame rate of 126 FPS with a minimum of 107 FPS provides a smooth experience that stays well above typical display refresh rates. The maximum of 145 FPS indicates headroom for less demanding scenes. At 1440p Medium, the average drops to 85 FPS with a minimum of 72 FPS, which remains playable on most monitors, though the margin above 60 FPS is thinner.
For users prioritizing frame rate over visual fidelity, the Low preset at 1080p delivers 142 FPS average, which is the highest measured result in the entire dataset. This setting is suitable for competitive play or for users with high-refresh-rate displays. Even at 1440p Low, the 95 FPS average is respectable, though the lack of minimum frame rate data means the consistency of that performance is unknown.
The High preset at 1080p produces 86 FPS average, which is a substantial drop from Medium’s 126 FPS. This suggests that the High preset introduces significant rendering costs that are not justified by the modest visual improvement it likely offers over Medium. At 1440p High, the 58 FPS average is borderline, and at 4K High, the 33 FPS average is unplayable for most users.
Ultra settings are not recommended for any resolution with this hardware, as even 1080p Ultra only achieves 58 FPS average. The 4K Ultra result of 23 FPS is the lowest in the dataset, and the lack of minimum frame rate data for Ultra at most resolutions leaves the consistency of these results unclear. The gap between Ultra and High at 1080p is 28 FPS (58 vs. 86), indicating that Ultra’s additional effects come at a heavy cost.
The data suggests that the Medium preset is the sweet spot for this combination. At 1080p, it offers a 40 FPS advantage over High (126 vs. 86) while presumably retaining most of the visual features that matter in a 2014 MMORPG. At 1440p, Medium’s 85 FPS average is significantly better than High’s 58 FPS, and the minimum of 72 FPS ensures that most scenes remain fluid. The 4K Medium result of 49 FPS is the only 4K setting that approaches playability, but the 41 FPS minimum suggests that busy scenes with many players could cause noticeable slowdowns.
How This Combo Ranks
The AMD Ryzen 5 7500X3D and AMD Radeon RX 9060 combination ranks 1603 out of 2761 tested combos in Archeage, placing it in the 58th percentile of the database. This means that roughly 42% of tested configurations perform worse in this game, while 58% perform better. Given that the GPU sits at the 59th percentile among all GPUs and the CPU at the 89th percentile among all CPUs, the combo’s overall ranking is dragged down by the graphics card’s mid-range positioning.
The GPU’s nearest rivals provide context for its performance class. The Radeon RX 9060 has an average benchmark score of 16014, which is 0.7% lower than the NVIDIA GeForce RTX 3060 Ti’s score of 16129. It is 1% higher than the AMD Radeon R9 370X (15862) and the AMD Radeon RX 7700 (15852), and 2.1% higher than the AMD Radeon Pro W5500 (15679). These deltas are small, indicating that the RX 9060 sits in a tightly contested performance tier. The measured FPS in Archeage aligns with this positioning, as the card produces mid-range frame rates that are neither exceptional nor poor for the game’s era.
The CPU’s nearest rivals show that the 7500X3D is a strong performer in synthetic benchmarks. Its average benchmark score of 44573 is 0.2% higher than the Intel Core Ultra X9 388H’s 44466, 0.5% higher than the Intel Core i9-13950HX’s 44342, and 0.6% higher than the AMD Ryzen AI Max 385’s 44309. It trails the Intel Core i5-14600 by 0.7% (44889 vs. 44573). These sub-1% deltas indicate that the 7500X3D is competitive with these high-end chips in general compute tasks, though its performance in Archeage specifically is more dependent on the game’s single-threaded characteristics.
The combo’s rank of 1603 out of 2761 suggests that Archeage is not particularly demanding on the CPU, so the 7500X3D’s strong benchmark scores do not translate into an outsized advantage in this title. The GPU’s mid-range standing is the more significant factor in the overall rank. The 58th percentile placement means that users with higher-end GPUs would see better results, while those with lower-end GPUs would see worse results.
Measured FPS Breakdown
At 1920x1080, the dataset includes four settings. Low produces the highest average at 142 FPS, with no minimum or maximum recorded. Medium averages 126 FPS with a minimum of 107 FPS and a maximum of 145 FPS. High averages 86 FPS with no range data. Ultra averages 58 FPS with no range data. The gap between Low and Medium is 16 FPS, while the gap between Medium and High is 40 FPS, and between High and Ultra is 28 FPS. This non-linear scaling indicates that the Medium preset is the most efficient in terms of frame rate per settings increment.
At 2560x1440, Low averages 95 FPS, Medium averages 85 FPS with a range of 72 to 98 FPS, High averages 58 FPS, and Ultra averages 39 FPS. The drop from Low to Medium is 10 FPS, a much smaller penalty than at 1080p. The drop from Medium to High is 27 FPS, and from High to Ultra is 19 FPS. The 1440p results show a tighter clustering of Low and Medium, suggesting that the GPU is beginning to become the limiting factor even at Medium settings.
At 3840x2160, Low averages 55 FPS, Medium averages 49 FPS with a range of 41 to 56 FPS, High averages 33 FPS, and Ultra averages 23 FPS. The difference between Low and Medium narrows to just 6 FPS, indicating that the GPU is saturated at 4K regardless of settings. The gap between Medium and High is 16 FPS, and between High and Ultra is 10 FPS. The 4K results show that even the lowest settings cannot achieve 60 FPS, confirming that this resolution is beyond the GPU’s capabilities for this game.
Looking at the Medium preset across all resolutions, the 1080p average of 126 FPS drops to 85 FPS at 1440p (a 32.5% decrease) and then to 49 FPS at 4K (a 42.4% decrease from 1440p). The minimum frame rates follow a similar pattern: 107 FPS at 1080p, 72 FPS at 1440p, and 41 FPS at 4K. The maximum frame rates are 145 FPS at 1080p, 98 FPS at 1440p, and 56 FPS at 4K. This data shows that the frame time consistency degrades as resolution increases, with the 4K minimum being more than 15% below the average.
The High preset shows the most significant resolution penalty. From 86 FPS at 1080p to 58 FPS at 1440p is a 32.6% drop, and from 58 FPS to 33 FPS at 4K is a 43.1% drop. The 4K High result is barely above the 30 FPS threshold that many consider the absolute minimum for playability, and it would likely produce noticeable stutter in crowded areas of the MMORPG.
FAQ
Q: What is the best resolution for this combo in Archeage?
A: The data indicates that 1920x1080 is the best resolution, as it is the only one where all settings achieve at least 58 FPS average. At 2560x1440, only Low and Medium settings stay above 60 FPS, while at 3840x2160, no setting reaches 60 FPS.
Q: Can this system handle 4K in Archeage?
A: At 3840x2160, the highest average frame rate is 55 FPS on Low settings. Medium averages 49 FPS, High averages 33 FPS, and Ultra averages 23 FPS. The 4K Medium minimum of 41 FPS suggests that 4K is only marginally playable on Low settings, and not recommended for a consistently smooth experience.
Q: How does the RX 9060 compare to the RTX 3060 Ti in synthetic benchmarks?
A: The Radeon RX 9060 has an average benchmark score of 16014, which is 0.7% lower than the NVIDIA GeForce RTX 3060 Ti’s average score of 16129. This places the two GPUs in a similar performance tier.
Q: What is the CPU’s percentile ranking among all CPUs?
A: The AMD Ryzen 5 7500X3D is in the 89th percentile among all CPUs, indicating it outperforms the majority of processors in synthetic benchmarks.
Q: Is the Ultra preset worth using at 1080p?
A: At 1080p Ultra, the average frame rate is 58 FPS, which is 28 FPS lower than High and 68 FPS lower than Medium. Given that Medium achieves 126 FPS average, the Ultra preset’s visual improvements come at a significant performance cost that may not be justified.
Q: What is the combo’s rank among all tested configurations?
A: This CPU-GPU combination ranks 1603 out of 2761 tested combos in Archeage, placing it in the 58th percentile. This means 42% of tested configurations perform worse and 58% perform better.
CPU Role
The AMD Ryzen 5 7500X3D is a 6-core, 12-thread processor from the 7000 series, based on the Zen 4 Raphael architecture. It has a base clock of 4.00 GHz and a boost clock of 4.50 GHz, with a 65 W TDP. The CPU’s cache configuration includes 64 KB of L1 per core, 1 MB of L2 per core, and a substantial 96 MB of shared L3 cache. This large L3 cache is a defining feature of the X3D series and is designed to improve gaming performance by reducing memory latency.
In Archeage, the CPU’s role appears to be secondary to the GPU. The measured frame rates scale consistently with resolution, and the 1080p Low result of 142 FPS suggests that the CPU can support high frame rates when the GPU is not the bottleneck. The 7500X3D’s single-thread performance, as indicated by its PassMark single-thread score of 3494, is sufficient for the game’s demands, which are typical of an MMO from 2014.
The CPU’s 96 MB of L3 cache is likely beneficial for Archeage’s open-world environments, where many objects and entities need to be tracked. However, the benchmark data does not isolate the CPU’s contribution from the GPU’s, so the exact impact of the cache is not directly measurable from the provided FPS figures. The CPU’s 89th percentile ranking among all CPUs indicates it is a strong performer, but the combo’s 58th percentile ranking in-game suggests that this strength is not fully utilized in Archeage.
The CPU’s memory support for DDR5 with dual-channel and 83.2 GB/s bandwidth provides ample data throughput for the game. The PCIe Gen 5 interface with 24 lanes ensures the GPU can communicate with the CPU without bandwidth limitations. The lack of a multiplier unlock means the CPU cannot be overclocked via multiplier adjustments, but its stock performance is sufficient for this title.
The nearest rival comparisons for the CPU show it is competitive with high-end laptop and desktop chips in synthetic benchmarks. The Intel Core Ultra X9 388H scores 0.2% lower, the Intel Core i9-13950HX scores 0.5% lower, and the AMD Ryzen AI Max 385 scores 0.6% lower. The Intel Core i5-14600 scores 0.7% higher. These small deltas suggest that the 7500X3D’s gaming performance is not dramatically different from these alternatives, and the choice between them would likely be determined by platform features rather than raw performance in Archeage.
The CPU’s 6 cores and 12 threads are adequate for a game from 2014, which likely uses only a few threads for its main simulation loop. The measured FPS at 1080p Low of 142 FPS indicates that the CPU is not limiting frame rates at that setting, and the consistent scaling pattern across resolutions suggests that the GPU takes over as the limiting factor at higher pixel counts. The CPU’s 5nm process node and 11,270 million transistors on a 71 mm² die contribute to its efficiency, but these factors do not directly translate into game performance metrics.
Hardware Specifications
AMD Ryzen 5 7500X3D
AMD Radeon RX 9060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7500X3D + AMD Radeon RX 9060 in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 55.0 |
| 3840x2160 | Medium | 49.0 |
| 3840x2160 | High | 33.0 |
| 3840x2160 | Ultra | 23.0 |
| 2560x1440 | Low | 95.0 |
| 2560x1440 | Medium | 85.0 |
| 2560x1440 | High | 58.0 |
| 2560x1440 | Ultra | 39.0 |
| 1920x1080 | Low | 142.0 |
| 1920x1080 | Medium | 126.0 |
| 1920x1080 | High | 86.0 |
| 1920x1080 | Ultra | 58.0 |
Archeage with Ryzen 5 7500X3D + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RX 9060 + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 5 7500X3D + RX 9060
Explore FPS benchmarks for other games using this same hardware combination.