The Technomancer

The Technomancer is a 2016 Action RPG that, on this hardware, reveals a clear performance hierarchy across resolutions. The Ryzen 5 5600 and RTX 3080 pairing delivers frame rates that range from highly competitive at 1080p to demanding at 4K, with the data indicating a shift in system bottleneck as resolution increases. This analysis breaks down the measured results to explain what you can expect from this specific combination.

Resolution Scaling

The measured FPS data shows a steep and predictable decline as resolution climbs from 1920x1080 to 3840x2160. At High settings, the average frame rate drops from 148.6 FPS at 1080p to 97.9 FPS at 1440p, a reduction of roughly 34%. Pushing further to 4K yields 49.6 FPS, which is nearly half the 1440p figure and only about one-third of the 1080p performance. This scaling pattern is typical for a game where the GPU becomes the primary limiting factor at higher pixel counts.

The gap between Low and Ultra settings widens dramatically with resolution. At 1080p, the spread between Low (222.3 FPS) and Ultra (116.9 FPS) is 105.4 FPS. At 1440p, the spread narrows to 69 FPS (146 vs 77). At 4K, the spread compresses further to 37.6 FPS (77.2 vs 39.6). This compression indicates that at 4K, the GPU is so saturated that even dropping to Low settings cannot fully compensate for the pixel throughput required, whereas at 1080p, the CPU and GPU have more headroom to express settings-based differences.

The data suggests that 1080p is where this combo shines, with even Ultra settings clearing the 116.9 FPS mark, comfortably above standard 60 Hz and 144 Hz display refresh rates. At 1440p, High settings at 97.9 FPS remain very playable, but Ultra dips to 77 FPS, which is still fluid. At 4K, the system is clearly GPU-bound; the High preset’s 49.6 FPS and Medium’s 60.1 FPS indicate that you will be making significant compromises to hit 60 FPS, and Ultra at 39.6 FPS is likely too heavy for smooth gameplay.

CPU Role

The AMD Ryzen 5 5600 brings six cores and twelve threads, with a base clock of 3.50 GHz and a boost clock of 4.40 GHz. Its architecture, Zen 3, with 32 MB of shared L3 cache, provides solid single-thread performance that is crucial for older game engines like the one powering The Technomancer. The CPU’s benchmark scores support this: a 3dmark single-thread score of 882 and a Cinebench R23 single-core score of 2584 indicate strong per-core capability.

In this game, the CPU’s role appears to be secondary to the GPU at higher resolutions, but it does establish a performance ceiling at 1080p. The fact that the average FPS at 1080p Low reaches 222.3 suggests the CPU is capable of feeding the GPU well beyond typical display refresh rates. However, the relatively modest multithreaded score (Cinebench R23 multicore of 18309) and the fact that the CPU’s nearest rivals (like the Intel Core i7-11700F with an avg score of 21957) are within 0.9% in average benchmark score, indicates that this processor is not a bottleneck in most scenarios for this title.

The CPU’s 79th percentile ranking among all tested CPUs, combined with the GPU’s 80th percentile, suggests a balanced pairing. The measured FPS deltas between resolutions are far larger than any CPU-related variance, confirming that the RTX 3080 is the component that dictates frame rates in The Technomancer. The CPU’s job is to keep up, and the 5600’s solid single-core performance ensures that it does not hold the system back, even at Low settings where frame rates are highest.

FAQ

Q: Can this system hit 60 FPS at 4K in The Technomancer?

A: Yes, but only with settings adjustments. The measured data shows 60.1 FPS at Medium settings and 49.6 FPS at High settings. To achieve a stable 60 FPS, you would need to use the Medium preset or lower.

Q: Is the RTX 3080 or the Ryzen 5 5600 the limiting factor at 1080p?

A: The data suggests the GPU is still the primary limiter, but the CPU is close behind. At 1080p Low, the system hits 222.3 FPS, which is very high. The difference between Low and Ultra at 1080p is 105.4 FPS, showing that the GPU is scaling with settings, not being capped by the CPU.

Q: What is the best preset for 1440p gameplay?

A: The High preset at 97.9 FPS offers the best balance of visual quality and smoothness. The Medium preset at 110.7 FPS is also excellent if you prefer higher frame rates, but Ultra drops to 77 FPS, which is still playable but not optimal for high-refresh monitors.

Q: How does the combo rank among all tested configurations?

A: This specific pairing of the Ryzen 5 5600 and RTX 3080 ranks 510th out of 1656 tested combos for this game. This places it in the upper third of all tested systems, indicating a strong overall performance level.

Q: Is there a big difference between High and Ultra settings?

A: Yes, the performance cost is significant. At 1440p, moving from High to Ultra reduces the average FPS from 97.9 to 77, a drop of over 20%. At 4K, the same move drops from 49.6 to 39.6 FPS, pushing the game into a less fluid territory.

Q: Does the CPU’s multithreading matter for this game?

A: The Ryzen 5 5600 has 12 threads, but the game appears to rely more on single-core performance. The CPU’s single-thread score of 882 in 3dmark is strong, and the data shows no evidence of a multi-threading bottleneck, as frame rates scale linearly with GPU load.

Settings Recommendations

For the best experience, the measured data points to a clear recommendation. At 1920x1080, the High preset at 148.6 FPS is the sweet spot, offering a substantial visual improvement over Medium (173.2 FPS) while still maintaining a frame rate well above 144 FPS. Ultra at 116.9 FPS is only worth it if you have a 120 Hz monitor and prioritize maximum fidelity, but the performance hit is noticeable.

At 2560x1440, the High preset is the recommended choice. The 97.9 FPS average is ideal for 100 Hz or 144 Hz displays, and the visual quality is high. Medium at 110.7 FPS is a viable alternative for those who prefer a higher frame rate buffer, but the step down in quality is noticeable. Ultra at 77 FPS is playable but leaves less headroom for demanding scenes, and the data shows it costs over 20% performance compared to High.

For 3840x2160, you must compromise. The Medium preset at 60.1 FPS is the only setting that reliably hits the 60 FPS target. High at 49.6 FPS is playable on a 60 Hz screen with VRR, but it will feel less smooth. Low at 77.2 FPS is the fastest 4K option, but the visual downgrade is severe. Ultra at 39.6 FPS is not recommended for active gameplay. The data shows that Medium is the only viable preset for a consistent 4K experience.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600 and NVIDIA GeForce RTX 3080 achieves a rank of 510 out of 1656 tested combos in The Technomancer. This places this system in the top 31% of all configurations tested, which is a solid result for a mid-range CPU paired with a high-end GPU. The ranking reflects the strong performance of the RTX 3080, which sits at the 80th percentile among all GPUs.

The CPU’s ranking is also a factor. The Ryzen 5 5600 is at the 79th percentile among all CPUs, and its nearest rivals in synthetic benchmarks include the Intel Core i7-11700F and AMD EPYC 9554P, with average score deltas of -0.9% and -0.6% respectively. This indicates the 5600 is a strong performer in its class. The high ranking for the combo suggests that the pairing is well-balanced, with neither component dragging the other down significantly.

Compared to other combos, this system is not at the absolute top, but it is far from the bottom. The 510th rank out of 1656 means there are many faster systems, likely with more recent CPUs or higher-tier GPUs (like the RTX 3090 or 4090 series). However, for the hardware in question, this rank shows that the Ryzen 5 5600 + RTX 3080 is a capable and competitive configuration for this title.

Measured FPS Breakdown

The following table details the exact average FPS measured for each resolution and settings preset.

• 1920x1080 (1080p)
• Low: 222.3 FPS
• Medium: 173.2 FPS
• High: 148.6 FPS
• Ultra: 116.9 FPS

• 2560x1440 (1440p)
• Low: 146.0 FPS
• Medium: 110.7 FPS
• High: 97.9 FPS
• Ultra: 77.0 FPS

• 3840x2160 (4K)
• Low: 77.2 FPS
• Medium: 60.1 FPS
• High: 49.6 FPS
• Ultra: 39.6 FPS

These figures show a consistent pattern: each step up in resolution costs roughly 30-35% of the frame rate at the same settings. For example, at High settings, the transition from 1080p to 1440p drops the average from 148.6 to 97.9 FPS, and the transition from 1440p to 4K drops it from 97.9 to 49.6 FPS. This logarithmic scaling is expected for a GPU-bound title and confirms that the RTX 3080’s memory bandwidth of 760.3 GB/s and 10 GB of GDDR6X memory are being taxed heavily at higher resolutions.