Steamworld Build

The AMD Ryzen 7 5700X and Intel Arc B580 combination ranks 1,348 out of 1,730 tested combos in Steamworld Build, placing it in the lower-middle portion of the database. This is a pairing where the GPU’s performance ceiling is the primary constraint, but the CPU provides enough headroom to avoid becoming the bottleneck in most scenarios. The data indicates a balanced setup that is capable of smooth gameplay at mainstream resolutions, though it struggles to maintain high frame rates at 4K with maximum quality settings.

How This Combo Ranks

The combo’s rank of 1,348 out of 1,730 tested combinations reflects a system that is adequate for the game but not exceptional. This position suggests that while the hardware meets the minimum requirements for a playable experience, it does not excel in the upper echelon of performance. In practical terms, this rank means the system sits closer to the 25th percentile of tested combos, indicating that many other configurations will deliver higher average frame rates. However, the ranking is not a condemnation; the measured FPS data shows that the combo can handle 1080p and 1440p gaming with solid results, which is the target audience for this class of hardware. The gap between this combo and higher-ranked ones is largely attributable to the GPU’s compute capabilities rather than any CPU limitation, as the Ryzen 7 5700X’s benchmark scores place it in the 83rd percentile among all CPUs, while the Arc B580 sits in the 66th percentile among GPUs.

GPU Role

The Intel Arc B580 is built on the Xe2-HPG architecture and features 12 GB of GDDR6 memory on a 192-bit bus, providing a memory bandwidth of 456.0 GB/s. The GPU operates at a base and boost clock of 2670 MHz, with memory running at 2375 MHz (19 Gbps effective). These specifications translate to a pixel rate of 213.6 GPixel/s and a texture rate of 427.2 GTexel/s, with FP32 performance at 13.67 TFLOPS. In Steamworld Build, the GPU’s role is critical at higher resolutions and settings. The benchmark results show a clear scaling pattern: at 1080p Low, the combo achieves 182.2 FPS, but this drops to 68.6 FPS at 1080p Ultra. The decline is steeper at 1440p, where Low yields 115.4 FPS and Ultra falls to 45.7 FPS. At 4K, the GPU becomes the limiting factor, with High settings producing only 33.9 FPS and Ultra dropping to a barely playable 21.6 FPS. The 12 GB VRAM capacity is sufficient for this game’s demands, as the data does not indicate any memory-related stuttering or texture pop-in at any tested setting. The GPU’s 66th percentile ranking among all GPUs, with its closest rival being the NVIDIA GeForce RTX 4060 (0.7% higher average score), positions it as a mid-range performer that excels at 1080p but struggles at 4K.

FAQ

Q: Can this combo handle 4K gaming in Steamworld Build?

A: At 4K, the combo delivers 60 FPS on Low settings, 49.2 FPS on Medium, 33.9 FPS on High, and 21.6 FPS on Ultra. For a playable experience, Low or Medium settings are recommended, as High and Ultra fall below the 60 FPS threshold.

Q: How does the Ryzen 7 5700X perform relative to its closest rivals?

A: The Ryzen 7 5700X has an average benchmark score of 26,214, placing it 0.1% ahead of the Intel Core i9-11900KF and 0.2% behind the AMD Ryzen 5 7600X. This indicates near-identical CPU performance among these rivals.

Q: What is the best resolution for this combo to maintain high frame rates?

A: The data shows that 1080p is the sweet spot, with all settings except Ultra exceeding 100 FPS. At 1440p, Low and Medium settings provide 115.4 FPS and 85.8 FPS respectively, making it a viable option for gamers with 1440p monitors.

Q: Does the Arc B580’s memory bandwidth impact performance in this game?

A: The GPU’s 456.0 GB/s bandwidth and 12 GB VRAM are sufficient for Steamworld Build, as the measured FPS does not indicate any memory bottleneck. The performance scaling across settings is consistent with compute-bound workloads rather than memory limitations.

Q: How does the CPU’s single-thread performance affect the game?

A: The Ryzen 7 5700X scores 3,193 in Cinebench R23 single-core, which is strong for a city builder. The game’s simulation logic benefits from this, but the measured FPS data shows that the GPU is the primary constraint at high settings, as the CPU keeps up without issue.

Q: Is this combo better suited for 1080p or 1440p gaming?

A: At 1080p, the combo achieves 182.2 FPS on Low and 105.3 FPS on High, making it excellent for high-refresh-rate monitors. At 1440p, it still provides 115.4 FPS on Low and 68.9 FPS on High, which is playable but not as smooth. The choice depends on whether the user prefers higher resolution or higher frame rates.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the combo’s performance across three resolutions and four settings presets. At 3840x2160, the combo starts at 60 FPS on Low, drops to 49.2 FPS on Medium, further to 33.9 FPS on High, and bottoms out at 21.6 FPS on Ultra. This represents a 64% reduction in frame rate from Low to Ultra, indicating that the GPU is heavily taxed by the higher settings at 4K. Moving to 2560x1440, the performance improves substantially: Low yields 115.4 FPS, Medium delivers 85.8 FPS, High provides 68.9 FPS, and Ultra falls to 45.7 FPS. The scaling from Low to Ultra at 1440p is a 60% drop, which is slightly less severe than at 4K, suggesting the GPU has more headroom at this resolution. At 1920x1080, the combo shines: Low achieves 182.2 FPS, Medium reaches 137.6 FPS, High maintains 105.3 FPS, and Ultra still produces 68.6 FPS. The 1080p results show that the combo is capable of high-refresh-rate gaming on Low through High settings, with only Ultra dropping below the 100 FPS mark. The data reveals a consistent pattern where each resolution step down from 4K to 1080p roughly doubles the frame rate at the same settings, highlighting the GPU’s bandwidth and compute limits as the primary performance drivers.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the user’s resolution and frame rate goals. At 1080p, the High preset at 105.3 FPS offers the best balance of visual quality and performance, as it provides a smooth experience on standard 60 Hz and 144 Hz monitors. For users with 240 Hz displays, the Medium preset at 137.6 FPS is the recommended choice, as it delivers a significant frame rate boost while maintaining respectable visual fidelity. The Ultra preset at 68.6 FPS is playable but does not offer a meaningful visual improvement over High to justify the 35% frame rate reduction. At 1440p, the Medium preset at 85.8 FPS is the sweet spot, providing a smooth experience on 60 Hz and 75 Hz monitors. The High preset at 68.9 FPS is also viable for 60 Hz displays, but the frame rate is close enough to the 60 FPS threshold that any complex scene could cause dips. For 4K gaming, the Low preset at 60 FPS is the only option that guarantees a consistent frame rate, while Medium at 49.2 FPS is acceptable for slower-paced city building. The High and Ultra presets at 4K are not recommended, as the frame rates of 33.9 FPS and 21.6 FPS respectively would result in a visibly stuttery experience. In general, the data suggests that users should prioritize the Medium or High presets at 1080p and 1440p, and only use Low or Medium at 4K.

CPU Role

The AMD Ryzen 7 5700X is an 8-core, 16-thread processor based on the Zen 3 architecture, with a base clock of 3.40 GHz and a boost clock of 4.60 GHz. It features 32 MB of shared L3 cache and supports dual-channel DDR4 memory with a bandwidth of 51.2 GB/s. In the context of Steamworld Build, a city builder that relies on CPU-intensive simulation logic, the processor’s multi-threaded performance is important. The CPU scores 22,620 in Cinebench R23 multi-core and 9,500 in Cinebench R20 multi-core, placing it in the 83rd percentile among all CPUs. Its nearest rivals include the Intel Core i9-11900KF (0.1% higher score) and the AMD Ryzen 5 7600X (0.2% higher score), indicating that the 5700X is competitive with modern mid-range and last-gen high-end processors. The CPU’s single-thread score of 3,193 in Cinebench R23 is also strong, which matters for the game’s main-thread logic. However, the measured FPS data shows that the CPU is not the bottleneck in this combo. At 1080p Low, the combo achieves 182.2 FPS, which is likely near the GPU’s maximum output, and the frame rate scales predictably with GPU load as settings increase. The CPU’s 65 W TDP and support for PCIe Gen 4 with 20 lanes ensure it can feed the GPU without any interface limitations. The data indicates that the Ryzen 7 5700X provides ample processing power for Steamworld Build, and users upgrading from older quad-core CPUs would see a significant improvement in simulation speed and frame time consistency. The processor’s high multi-threaded benchmark scores, such as 26,612 in PassMark multi-thread and 9,720 in Geekbench multi-core, further confirm its capability to handle the game’s background AI and resource management tasks without causing frame drops.