Steamworld Build

Steamworld Build

AVERAGE FPS
151
excellent

This combination delivers exceptional performance with an average of 151 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 63 84 112
1440p QHD 85 121 165 215
1080p Full HD 133 190 255 339

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 112
3840x2160 Medium 84
3840x2160 High 63
3840x2160 Ultra 46
2560x1440 Low 215
2560x1440 Medium 165
2560x1440 High 121
2560x1440 Ultra 85
1920x1080 Low 339
1920x1080 Medium 255
1920x1080 High 190
1920x1080 Ultra 133

Steamworld Build with AMD Ryzen 5 7500F + NVIDIA GeForce RTX 5070, In-Depth Analysis

Steamworld Build is a city builder where the simulation and rendering load can scale very differently depending on your hardware. The data for the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 5070 combination shows a system that is heavily front-loaded on the CPU at lower resolutions, but shifts decisively to the GPU as the resolution climbs. This pairing is a strong match for high-refresh-rate 1080p and 1440p play, with 4K Ultra being the only configuration that pushes the GPU to its limits. The measured frame rates across the board indicate that the RTX 5070 has ample headroom for this genre, making the Ryzen 5 7500F's single-thread performance the primary factor for achieving the highest possible frame rates.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, running on the AMD Socket AM5 platform. Its base clock of 3.70 GHz can boost up to 5.00 GHz, which provides the raw single-thread speed that city builders often rely on for game logic and simulation steps. In the context of Steamworld Build, the benchmark results show that the CPU is a critical component for pushing frame rates at lower resolutions. At 1080p with Low settings, the system achieves 339 FPS, a figure that far exceeds what the GPU alone would need to render, indicating the CPU is driving the simulation fast enough to feed the GPU at an extremely high rate.

The processor's benchmark scores reinforce its capability in this role. Its Cinebench R23 single-core score of 3218 and multi-core score of 22799 demonstrate a balanced performance profile. The CPU's 82nd percentile ranking among all CPUs suggests it is a solid performer, but the more telling comparison is against its nearest rivals. The data shows it trades blows with the Intel Core i7-11850H (0.1% faster) and the AMD Ryzen 7 2700X (0.3% slower), indicating that while it is not a class leader, its performance is within a hair of these established parts. For a game like Steamworld Build, which may not heavily utilize all 12 threads, the 5.00 GHz boost clock is likely the more important spec, as it ensures that the primary simulation thread has the highest possible clock speed.

The L3 cache of 32 MB (shared) also plays a role in keeping frequently accessed simulation data close to the cores. This is beneficial for maintaining consistent frame pacing as your city grows and the number of entities with individual states increases. The data shows that the CPU is not a bottleneck at 1440p High, where the system achieves 121.2 FPS, but it is clearly the limiting factor at 1080p Low. The 339 FPS result at 1080p Low is a strong indicator that the Ryzen 5 7500F's single-thread performance is more than sufficient to handle the game's simulation logic, providing a significant headroom for players who want to push for the highest refresh rates.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 5070 is the other half of this duo, featuring 12 GB of GDDR7 memory on a 192-bit bus, which provides a memory bandwidth of 672.0 GB/s. Its base clock of 2325 MHz and boost clock of 2512 MHz are complemented by 6144 shading units, giving it a substantial raw compute capacity of 30.87 TFLOPS for FP32 operations. In Steamworld Build, the GPU's role becomes more pronounced as settings and resolution increase. The transition from 1080p Medium (255.4 FPS) to 4K Medium (83.5 FPS) shows a significant performance drop, which is characteristic of a GPU-bound workload at higher pixel counts.

The GPU's 12 GB of VRAM is a key asset for a city builder, as it allows for the storage of numerous high-resolution textures for buildings, terrain, and ambient details. While the measured FPS data does not explicitly show VRAM usage, the fact that the card can handle 4K High at 63.1 FPS suggests that the memory capacity is not a bottleneck at these settings. The RTX 5070's benchmark scores, such as a Passmark G3D score of 29137 and a Geekbench OpenCL score of 185269, place it in the 83rd percentile of all GPUs. Its nearest rival, the NVIDIA GeForce RTX 3090, is a mere 0.6% slower in average benchmark score, which is a remarkable result for a newer generation card.

The GPU's performance scaling from Low to Ultra settings is also telling. At 1080p, the frame rate drops from 339 FPS on Low to 132.5 FPS on Ultra, while at 4K it drops from 111.7 FPS on Low to 46 FPS on Ultra. This 58% reduction in performance from Low to Ultra at 4K highlights the GPU's workload. The RTX 5070 is clearly capable of delivering playable frame rates at 4K on High settings, but the jump to Ultra pushes it to a point where the frame rate falls below the 60 FPS threshold, indicating that the GPU is the primary limiting component in that specific configuration.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data across resolutions shows a clear pattern of scaling that reveals the balance between the CPU and GPU. At Low settings, the frame rate drops from 339 FPS at 1080p to 215.3 FPS at 1440p, and then to 111.7 FPS at 4K. This represents a 34% drop from 1080p to 1440p, but a 48% drop from 1440p to 4K. The initial drop is relatively shallow, suggesting that the system is still partly CPU-limited at 1440p Low. However, the significant drop to 4K indicates that the GPU is starting to become the primary bottleneck, as the number of pixels to render quadruples from 1080p to 4K.

At High settings, the scaling is more linear. The system achieves 189.9 FPS at 1080p, 121.2 FPS at 1440p, and 63.1 FPS at 4K. The percentage drops are 36% and 48%, respectively. This consistency suggests that the system is more balanced at this setting, with both the CPU and GPU contributing to the frame rate. The fact that 1080p High (189.9 FPS) is significantly higher than 4K Low (111.7 FPS) is notable. It shows that even with lower graphical fidelity, the sheer pixel count of 4K is a much heavier load for the GPU than the extra visual effects of the High preset are at 1080p.

This data points to a system where the CPU is the dominant factor at 1080p and 1440p on lower settings. The RTX 5070 has more than enough power to render the scene quickly, but the Ryzen 5 7500F's simulation speed caps the output. As you increase the resolution, the GPU's rendering time increases, and it eventually becomes the limiting factor. The crossover point appears to be around 1440p High, where the frame rate of 121.2 FPS is still high, but the scaling indicates the GPU is taking on a more significant role. At 4K Ultra, the GPU is clearly the bottleneck, as the frame rate drops to 46 FPS, which is a 66% drop from the 4K Low result.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured data, the optimal settings for this hardware configuration depend on your display's resolution and refresh rate. For players on a 1080p display with a 144Hz or 165Hz monitor, the High preset is the sweet spot, delivering 189.9 FPS. This is more than enough to saturate a high-refresh-rate panel while providing a substantial visual upgrade over the Medium preset, which runs at 255.4 FPS. The Ultra preset at 1080p drops to 132.5 FPS, which is still playable, but the performance cost of 57 FPS over High is significant for a city builder where the visual difference may not be as noticeable during fast camera panning.

For 1440p users, the High preset is also the recommended choice, as it hits 121.2 FPS. This is comfortably above the 60 FPS mark and provides a smooth experience for a game of this genre. The Medium preset offers a higher frame rate of 165 FPS, but the visual fidelity reduction may not be worth the extra headroom unless you are using a very high refresh rate display (240Hz or more). The Ultra preset at 1440p (85.1 FPS) is a viable option for players who prioritize image quality, but the 30% performance drop from High makes it a less optimal choice for maintaining a consistently high frame rate.

At 4K, the choices are more constrained. The High preset is the only one that offers a playable experience at a consistent 63.1 FPS. The Medium preset is also playable at 83.5 FPS, and it could be considered if you want a higher frame rate buffer. However, the Ultra preset, at 46 FPS, falls below the standard 60 FPS threshold and should be avoided for a smooth experience. The Low preset at 4K (111.7 FPS) demonstrates the GPU's power but is not recommended due to the significant visual compromises. The data strongly suggests that High settings provide the best balance of visual quality and performance across all three resolutions.

FAQ

Q: Can this system handle 4K gaming in Steamworld Build?

A: Yes, but with limitations. The system achieves 63.1 FPS on High settings and 83.5 FPS on Medium settings at 3840x2160. However, the Ultra preset drops to 46 FPS, which is below the standard 60 FPS playability threshold.

Q: Is the CPU or GPU the main bottleneck at 1080p?

A: The CPU is the primary limiter at 1080p. The frame rate scales dramatically with settings (339 FPS on Low vs. 189.9 FPS on High), but even the highest GPU load at 1080p Ultra (132.5 FPS) is well above what the GPU would struggle with, indicating the CPU's simulation speed is the limiting factor.

Q: What is the best setting for a 1440p 144Hz monitor?

A: The High preset is the best choice. It delivers 121.2 FPS, which is close to the 144Hz refresh rate. The Medium preset offers 165 FPS, but the visual trade-off may not be worth it. The Ultra preset drops to 85.1 FPS, which is still smooth but leaves performance on the table.

Q: How does the Ryzen 5 7500F compare to its immediate competitors?

A: The data shows it is essentially tied with its nearest rivals. It is 0.1% faster than the Intel Core i7-11850H and 0.3% slower than the AMD Ryzen 7 2700X, indicating that performance is virtually identical among these parts in synthetic benchmarks.

Q: How much performance is lost when going from 1440p to 4K on High settings?

A: The system drops from 121.2 FPS at 2560x1440 to 63.1 FPS at 3840x2160, a reduction of approximately 48%. This indicates a significant shift to a GPU-bound workload due to the increased pixel count.

Q: Is the RTX 5070's 12 GB VRAM enough for Steamworld Build?

A: Based on the measured performance, yes. The system maintains playable frame rates at 4K High (63.1 FPS) and 4K Medium (83.5 FPS), which suggests that the 12 GB of GDDR7 memory is sufficient for the game's texture and geometry demands at these settings.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The following table and analysis break down the exact average frame rates measured for the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 5070 combination in Steamworld Build.

1920x1080 (1080p)

At this resolution, the system exhibits exceptional performance, driven largely by the CPU's strong single-thread capabilities.

  • Low: 339.0 FPS
  • Medium: 255.4 FPS
  • High: 189.9 FPS
  • Ultra: 132.5 FPS

The scaling from Low to Ultra shows a 61% performance drop, but even the lowest result at Ultra is highly playable. The gap between Low and Medium is 83.6 FPS, while the gap between High and Ultra is 57.4 FPS, showing that the Ultra preset has a significant performance cost.

2560x1440 (1440p)

This resolution is the sweet spot for this hardware, offering a great balance between visual fidelity and high frame rates.

  • Low: 215.3 FPS
  • Medium: 165.0 FPS
  • High: 121.2 FPS
  • Ultra: 85.1 FPS

The frame rates remain high across the board. The drop from Low to Ultra is 60%, which is consistent with the 1080p scaling. The High preset at 121.2 FPS is particularly notable for being well-suited for high-refresh-rate 1440p monitors.

3840x2160 (4K)

At 4K, the GPU becomes the dominant factor, and performance drops significantly, especially on the Ultra preset.

  • Low: 111.7 FPS
  • Medium: 83.5 FPS
  • High: 63.1 FPS
  • Ultra: 46.0 FPS

This is the only resolution where the system fails to maintain 60 FPS, and it happens on the Ultra preset. The drop from High to Ultra is 17.1 FPS, which is a 27% reduction. The Medium preset offers a comfortable 83.5 FPS, making it a strong choice for 4K gaming if you want a higher frame rate buffer than High provides.

Hardware Specifications

AMD Ryzen 5 7500F

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 5000 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 5070

VRAM 12 GB GDDR7
Base Clock —
Boost Clock 2512 MHz MHz
TDP 250 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7500F + NVIDIA GeForce RTX 5070 in Steamworld Build

Resolution Settings Avg FPS
3840x2160 Low 111.7
3840x2160 Medium 83.5
3840x2160 High 63.1
3840x2160 Ultra 46.0
2560x1440 Low 215.3
2560x1440 Medium 165.0
2560x1440 High 121.2
2560x1440 Ultra 85.1
1920x1080 Low 339.0
1920x1080 Medium 255.4
1920x1080 High 189.9
1920x1080 Ultra 132.5

Steamworld Build with Ryzen 5 7500F + Other GPUs

See how Steamworld Build performs with the same CPU but different graphics cards.

Steamworld Build with RTX 5070 + Other CPUs

See how Steamworld Build performs with the same GPU but different processors.

Other Games with Ryzen 5 7500F + RTX 5070

Explore FPS benchmarks for other games using this same hardware combination.