Steamworld Build

Steamworld Build

AVERAGE FPS
101
good

This combination provides smooth gameplay with an average of 101 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 29 43 58 76
1440p QHD 55 82 110 143
1080p Full HD 87 129 172 225

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 76
3840x2160 Medium 58
3840x2160 High 43
3840x2160 Ultra 29
2560x1440 Low 143
2560x1440 Medium 110
2560x1440 High 82
2560x1440 Ultra 55
1920x1080 Low 225
1920x1080 Medium 172
1920x1080 High 129
1920x1080 Ultra 87

Steamworld Build with AMD Ryzen 5 5600F + NVIDIA GeForce RTX 4060, In-Depth Analysis

Steamworld Build is a city builder where the pace of simulation and the smoothness of camera movement matter more than raw frame rates. The measured data for this combination of an AMD Ryzen 5 5600F and NVIDIA GeForce RTX 4060 reveals a system that is capable of handling the game at high settings across most resolutions, but with distinct limitations at the extreme end of the spectrum.

Resolution Scaling

The performance scaling from 1080p to 4K clearly shows the RTX 4060 becoming the primary limiting factor as pixel count increases. At 1080p with High settings, the system delivers an average of 129 FPS. Moving to 1440p drops that to 82 FPS, a reduction of roughly 36%. At 4K, the average falls to 43 FPS, which is less than half of the 1080p score. This steep decline is a classic sign of GPU-bound performance, where the graphics card's rendering throughput is exhausted by the sheer number of pixels.

The scaling pattern is even more dramatic at the highest settings. At 1080p Ultra, the average FPS is 87. At 1440p Ultra, it drops to 55, and at 4K Ultra, it plummets to just 29 FPS. The gap between 1080p and 4K at Ultra settings is a 67% reduction, indicating that the combination of high resolution and maximum graphical fidelity is too demanding for this GPU to maintain a fluid experience. The data suggests that while the CPU is more than capable at lower resolutions, the GPU's 8 GB of VRAM and 128-bit memory interface are not sufficient to handle the 4K Ultra workload.

The difference between Low and Ultra settings at the same resolution also highlights the GPU's role. At 1080p, the jump from Low (225 FPS) to Ultra (87 FPS) represents a massive 61% performance penalty. This is a much larger drop than what would be expected if the CPU were the bottleneck. The GPU is being pushed harder as settings increase, confirming it is the component that determines the ceiling for this game at higher presets.

Settings Recommendations

Based on the measured data, the High preset provides the most balanced experience across all tested resolutions. At 1080p, High settings yield a very smooth 129 FPS average, which is more than sufficient for a city builder where precision mouse control is key. At 1440p, High still maintains a solid 82 FPS, providing a great balance between visual quality and responsiveness. Even at 4K, High delivers a playable 43 FPS average, which is acceptable for a genre that does not require twitch-reflex response times.

The Medium preset is a viable alternative for those seeking higher frame rates, especially at 1440p where it reaches 110 FPS. This is a significant 34% improvement over High at that resolution. The data also provides min and max FPS for Medium settings, showing a range of 147-198 at 1080p and 93-126 at 1440p. This indicates a stable frame time delivery with no severe stutters, making it a good choice for users who prioritize smoothness over absolute visual detail.

The Ultra preset is not recommended for this setup. While it does produce a playable 87 FPS average at 1080p, the performance drops to 55 FPS at 1440p and becomes unplayable at 4K with its 29 FPS average. The visual gain from High to Ultra is typically marginal in city builders, and the performance cost is steep. The Low preset is only useful for maximizing frame rates on 1080p monitors, where it achieves 225 FPS, but it does so at the cost of significant visual fidelity.

CPU Role

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture. Its base clock of 3.00 GHz and boost clock of 4.00 GHz are sufficient to handle the simulation logic of Steamworld Build. The CPU's benchmark scores support this, with a strong single-thread score of 2872 and a multithread score of 19236 in Passmark tests. These results indicate a processor with robust single-core performance, which is often critical for game simulation threads, and ample multi-core capability for background tasks.

The data suggests that the CPU is not a bottleneck in this game, especially at higher resolutions. For example, at 1080p Low, the system achieves 225 FPS. At 1440p Low, it drops to 143 FPS, and at 4K Low, it is 76 FPS. This consistent decline with resolution increase, even at Low settings where the GPU load is minimized, shows the GPU is the limiting factor. If the CPU were the bottleneck, the FPS would remain relatively flat across resolutions at the same settings.

The processor's 32 MB of shared L3 cache and dual-channel DDR4 memory support provide sufficient bandwidth for the game's asset streaming and data processing. The 65W TDP also indicates efficient power usage, which is a good match for the RTX 4060. In the context of the game's results, the 5600F provides a stable platform that allows the RTX 4060 to perform to its full potential, only becoming a factor at very low resolutions and settings where frame rates exceed 200 FPS, which is far beyond the refresh rate of most monitors.

How This Combo Ranks

In the database of tested combinations for Steamworld Build, this pairing of the Ryzen 5 5600F and RTX 4060 holds a rank of 1530 out of 2924 tested combos. This places it in the middle of the pack, specifically in the 52nd percentile (calculated from its rank). This ranking is logical given the mid-range nature of both the CPU and GPU. It outperforms many older or lower-spec combinations but is also behind systems with higher-end CPUs and GPUs.

The ranking is a direct result of the measured performance. With a 4K High average of 43 FPS and a 1080p Ultra average of 87 FPS, the system demonstrates solid 1080p and 1440p capability but falls short of being a high-end 4K machine. The rank reflects that in a database containing 2924 combos, there are 1393 combinations that deliver better performance in this specific game. This is not a negative mark against the combo, but rather a positioning that aligns with its hardware class.

The individual component benchmarks corroborate this mid-pack standing. The CPU's average benchmark score of 36945 places it at the 85th percentile of all CPUs, showing it is a strong processor. The GPU's average benchmark score of 17639 places it at the 61st percentile of all GPUs. The combination of a high-percentile CPU with a lower-percentile GPU results in an overall ranking that is pulled down by the graphics card, which is the limiting factor in this game's demanding high-resolution scenarios.

FAQ

Q: What is the highest average FPS recorded for this setup?

A: The highest average FPS recorded is 225, achieved at 1920x1080 with Low settings.

Q: Can this system handle 4K gaming in Steamworld Build?

A: It can at lower settings; the data shows a 76 FPS average at 4K Low and 58 FPS at 4K Medium. However, at 4K High and Ultra, the averages drop to 43 FPS and 29 FPS, respectively, which may not be ideal for all users.

Q: How does the CPU compare to its nearest rivals in benchmark scores?

A: The Ryzen 5 5600F has an average benchmark score of 36945. This is nearly identical to the Intel Core Ultra 5 225 (36938, 0% delta) and the AMD Ryzen 5 5500X3D (37018, -0.2% delta), showing they are all very closely matched in processing power.

Q: What is the performance difference between High and Ultra settings at 1440p?

A: The performance drops from an average of 82 FPS on High settings to 55 FPS on Ultra settings at 2560x1440, which is a 33% reduction in frame rate.

Q: Is the RTX 4060 more powerful than the AMD Radeon 780M?

A: According to benchmark data, the RTX 4060 has an average score of 17639, which is slightly higher than the AMD Radeon 780M's score of 17588, a difference of 0.3%.

Q: What is the best resolution for a 60 FPS experience on High settings?

A: The data shows that at 2560x1440 with High settings, the average FPS is 82, which is well above 60. At 3840x2160 with High settings, the average drops to 43 FPS, so 1440p is the highest resolution that comfortably exceeds the 60 FPS target on this preset.

Measured FPS Breakdown

The following is the complete set of measured average frame rates for this hardware configuration, broken down by resolution and settings.

3840x2160 (4K)

  • Ultra: 29 FPS average.
  • High: 43 FPS average.
  • Medium: 58 FPS average, with a range of 49 to 67 FPS.
  • Low: 76 FPS average.

2560x1440 (1440p)

  • Ultra: 55 FPS average.
  • High: 82 FPS average.
  • Medium: 110 FPS average, with a range of 93 to 126 FPS.
  • Low: 143 FPS average.

1920x1080 (1080p)

  • Ultra: 87 FPS average.
  • High: 129 FPS average.
  • Medium: 172 FPS average, with a range of 147 to 198 FPS.
  • Low: 225 FPS average.

GPU Role

The NVIDIA GeForce RTX 4060 is built on the Ada Lovelace architecture and features 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 272.0 GB/s. Its boost clock is rated at 2460 MHz. The benchmark data shows this GPU performs at the 61st percentile of all GPUs, with an average score of 17639. This positions it as a solid mainstream card, but its memory configuration and chip size (159 mm²) suggest it is designed for 1080p and 1440p gaming rather than 4K.

The GPU's role as the performance limiter in Steamworld Build is evident from the resolution scaling. The 4K High result of 43 FPS is a stark contrast to the 1080p High result of 129 FPS, indicating a 67% performance loss due to pixel count. The 8 GB VRAM is likely a significant factor, as 4K textures can easily exceed this capacity, leading to texture swapping and lower frame rates. The GDDR6 memory, while fast, is constrained by the 128-bit interface, which limits the amount of data that can be moved to and from the GPU.

The RTX 4060's nearest rivals in the database are older or integrated graphics solutions, such as the AMD Radeon HD 7790 and the Radeon 780M, with delta percentages of -0.2% and 0.3% respectively. This reinforces that the 4060 is a modern entry-level discrete GPU. In this game, its performance is acceptable for 1080p and 1440p on High settings, but the data suggests that users should not expect a high-refresh-rate 4K experience without dropping the graphical preset significantly. The GPU's capabilities are best utilized at 1440p, where it can maintain an 82 FPS average on High, providing a smooth and visually appealing experience.

Hardware Specifications

AMD Ryzen 5 5600F

Cores / Threads 6 / 12
Base Clock 3000 MHz
Boost Clock 4000 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 4060

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2460 MHz MHz
TDP 115 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600F + NVIDIA GeForce RTX 4060 in Steamworld Build

Resolution Settings Avg FPS
3840x2160 Low 76.0
3840x2160 Medium 58.0
3840x2160 High 43.0
3840x2160 Ultra 29.0
2560x1440 Low 143.0
2560x1440 Medium 110.0
2560x1440 High 82.0
2560x1440 Ultra 55.0
1920x1080 Low 225.0
1920x1080 Medium 172.0
1920x1080 High 129.0
1920x1080 Ultra 87.0

Steamworld Build with Ryzen 5 5600F + Other GPUs

See how Steamworld Build performs with the same CPU but different graphics cards.

Steamworld Build with RTX 4060 + Other CPUs

See how Steamworld Build performs with the same GPU but different processors.

Other Games with Ryzen 5 5600F + RTX 4060

Explore FPS benchmarks for other games using this same hardware combination.