Steamworld Build
This combination delivers exceptional performance with an average of 171 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 53 | 84 | 109 | 144 |
| 1440p QHD | 106 | 153 | 205 | 249 |
| 1080p Full HD | 163 | 238 | 265 | 286 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with AMD Ryzen 5 5600 + NVIDIA GeForce RTX 5080, In-Depth Analysis
Steamworld Build is a city builder where the pace of simulation and the rendering of a bustling colony determine playability. The measured data for this specific combination—AMD Ryzen 5 5600 and NVIDIA GeForce RTX 5080—shows a system that is heavily overqualified for the game’s demands, but the settings menu still hides a few important performance traps. The RTX 5080, with its 16 GB of GDDR7 memory and a boost clock of 2617 MHz, is clearly the dominant force here, but the Ryzen 5 5600’s 6 cores and 12 threads are sufficient to keep frames flowing. The key takeaway from the data is that the Ultra preset is a significant step down in performance from High, and for a game like this, the visual fidelity gain is likely not worth the frame rate loss.
Settings Recommendations
The measured FPS data reveals a clear hierarchy in settings presets, and the optimal choice depends heavily on your target resolution and refresh rate. For 1920x1080, the High preset delivers an average of 238 FPS, which is only slightly below the Low preset’s 286.3 FPS and the Medium preset’s 265 FPS. The Ultra preset, however, drops to 163.4 FPS. While all of these are well above the standard 60 Hz refresh rate, the jump from Medium to High is a small cost for the visual improvement, and the drop from High to Ultra is nearly 75 FPS—a massive penalty for a city builder where the camera often pans across large areas. The data suggests High is the sweet spot at 1080p, offering a 75% higher frame rate than Ultra while only being 11% slower than Low.
At 2560x1440, the story becomes more nuanced. The High preset still shines with an average of 153.3 FPS, while Medium provides 205.2 FPS and Low offers 248.5 FPS. The Ultra preset, again, is the outlier, dropping to 106.2 FPS. For users with a 144 Hz monitor, High is the best choice because it comfortably clears that threshold with a 44% margin over the 106.2 FPS of Ultra. If you have a 240 Hz display, you would need to step down to Medium to see the benefit. For a game focused on management and layout rather than twitch reflexes, the visual quality of High at 1440p is the recommended balance, as it provides a 44% performance lead over Ultra.
At 3840x2160 (4K), the performance curves flatten out but still show a critical issue with the Ultra preset. High delivers a solid 83.8 FPS, which is playable and smooth for a strategy title. Medium is better at 108.5 FPS, and Low reaches 144.1 FPS. The Ultra preset, however, plummets to 53.3 FPS. This is the only resolution where the Ultra preset drops below the 60 FPS threshold, making it feel stuttery and unresponsive for camera movement. The recommendation here is simple: use High for a stable 4K experience, as the 36% gap between High and Ultra is not worth the marginal visual improvements in a game where you are mostly looking at buildings and terrain from a distance. If you have a high refresh rate 4K display, Medium is the only preset that offers a significant boost without the massive performance hit of Ultra.
GPU Role
The NVIDIA GeForce RTX 5080 is the undisputed performance driver in this pairing. The data shows that the GPU is rarely the bottleneck, even at 4K, until you engage the Ultra preset. The card’s 16 GB of GDDR7 memory on a 256-bit bus provides a bandwidth of 960.0 GB/s, which is more than enough for the textures and geometry in Steamworld Build. The card’s boost clock of 2617 MHz and its 10752 shading units are clearly overkill for this title, as evidenced by the 286.3 FPS at 1080p Low. The performance scaling from Low to High at 1080p is only a 17% drop, and from High to Ultra it is a 31% drop, indicating that the Ultra preset introduces effects that are heavily taxing on the GPU’s compute units, likely related to shadow resolution or ambient occlusion quality.
The GPU’s role becomes most apparent at 4K. The difference between High (83.8 FPS) and Ultra (53.3 FPS) is a 36% reduction in frame rate, which is a severe penalty. This suggests that the Ultra preset is not just increasing texture quality, but also adding post-processing or simulation effects that require substantial GPU resources. The RTX 5080’s 84 RT cores and 336 Tensor cores are not specifically utilized in this benchmark data, but their presence means the card has headroom for future updates or mods. The card’s process node of 5 nm and its 45,600 million transistors are the physical basis for its high FP32 performance of 56.28 TFLOPS, which is what allows it to brute-force its way through the High preset at 4K without breaking a sweat. The data indicates that the GPU is the reason this combo can achieve 144.1 FPS at 4K Low, a figure that would be impossible with a weaker card.
FAQ
Q: Is the Ultra preset ever worth using with this combo?
A: No, based on the measured data. At 4K, Ultra drops to 53.3 FPS, which is below the 60 FPS standard and a 36% decrease from High. Even at 1080p, Ultra is 31% slower than High, and the visual difference in a city builder is not worth the frame rate loss.
Q: Can this system handle 4K gaming in Steamworld Build?
A: Yes, but with a caveat. The High preset at 3840x2160 yields an average of 83.8 FPS, which is perfectly playable. For higher refresh rates, the Medium preset at 108.5 FPS is the better option, but you should avoid Ultra unless you are content with 53.3 FPS.
Q: How does the RTX 5080’s memory affect performance in this game?
A: The 16 GB of GDDR7 memory with 960.0 GB/s of bandwidth is more than sufficient for Steamworld Build. The data shows no memory-related stuttering, as the frame rates are consistently high even at 4K High, indicating that the VRAM capacity is not a limiting factor.
Q: Is the CPU holding back the GPU in this game?
A: The data suggests the Ryzen 5 5600 is not a bottleneck. At 1080p Low, the combo hits 286.3 FPS, which is exceptionally high. The CPU’s 6 cores and 12 threads are enough to feed the GPU, as the frame rates scale predictably with resolution changes, indicating a GPU-bound workload.
Q: What is the best setting for a 144 Hz 1440p monitor?
A: The High preset at 2560x1440 provides 153.3 FPS, which is just above the 144 Hz refresh rate. This gives you a smooth experience with good visuals. Using Medium would give you 205.2 FPS, but the visual quality loss is unnecessary for the frame rate headroom.
Q: Why is the jump from High to Ultra so large in performance cost?
A: The measured data shows a consistent and significant drop across all resolutions when switching to Ultra. At 1080p, the drop from 238 FPS to 163.4 FPS is a 31% reduction, and at 4K it is a 36% reduction. This indicates that the Ultra preset enables computationally expensive rendering features that are disproportionate to the visual benefit in this genre.
Measured FPS Breakdown
At 1920x1080, the combo produces exceptionally high frame rates across all presets. The Low preset leads with 286.3 FPS, followed by Medium at 265 FPS, High at 238 FPS, and Ultra at 163.4 FPS. The gap between Low and High is 16.9%, while the gap between High and Ultra is 31.3%. This resolution is clearly overkill for the hardware, as even the most demanding preset clears 160 FPS easily.
At 2560x1440, the frame rates remain high, but the differences between presets become more pronounced. Low delivers 248.5 FPS, Medium drops to 205.2 FPS, High sits at 153.3 FPS, and Ultra falls to 106.2 FPS. The progression from Low to Medium is a 17.4% decrease, from Medium to High is a 25.3% decrease, and from High to Ultra is a 30.7% decrease. This shows a consistent pattern of diminishing returns as you increase visual fidelity.
At 3840x2160, the 4K resolution finally starts to stress the GPU. Low yields 144.1 FPS, Medium provides 108.5 FPS, High offers 83.8 FPS, and Ultra drops to 53.3 FPS. The relative performance gaps are similar to 1440p, but the absolute numbers mean that only Low, Medium, and High are viable for smooth gameplay. The Ultra preset is the only one that falls below the 60 FPS threshold, making it unsuitable for practical use.
The overall trend in the data is that the RTX 5080 provides a linear performance scaling with resolution changes, but the Ultra preset introduces a nonlinear penalty that is consistent across all resolutions. The High preset is the most balanced choice, offering 238 FPS at 1080p, 153.3 FPS at 1440p, and 83.8 FPS at 4K.
How This Combo Ranks
In the global database of tested combinations for Steamworld Build, this pairing of the AMD Ryzen 5 5600 and NVIDIA GeForce RTX 5080 achieves a combo rank of 104 out of 1730 tested configurations. This places it in the top 6% of all tested systems, which is an excellent result for a CPU that is not from the latest generation. The ranking confirms the GPU’s power, as the Ryzen 5 5600 is a mid-range processor from 2022, but the RTX 5080’s raw performance is so dominant that it carries the system to a high tier.
The context for this rank is important. While the CPU is not a top-tier part, the data shows that the game is primarily GPU-bound, as evidenced by the frame rate differences between resolutions. The Ryzen 5 5600’s percentile rank of 79 among all CPUs indicates it is a solid performer, but its nearest rivals include the Intel Core i7-11700F, which has a slightly higher average benchmark score. However, in this specific game, the GPU’s capabilities are the deciding factor for the combo’s position. The fact that this combo ranks above 94% of all tested systems shows that you do not need a flagship CPU to achieve excellent results in Steamworld Build, provided you pair it with a high-end GPU like the RTX 5080.
CPU Role
The AMD Ryzen 5 5600, with its 6 cores and 12 threads, plays a supporting role in this configuration. The CPU’s base clock of 3.50 GHz and boost clock of 4.40 GHz are the key specifications that determine its ability to feed the GPU. In Steamworld Build, a city builder that often has complex simulation logic for resource management and citizen pathfinding, the CPU’s single-thread performance is critical. The 3DMark single-thread score of 882 and the Cinebench R23 single-core score of 2584 indicate that the Ryzen 5 5600 has strong per-core performance, which is sufficient for the game’s engine.
The data shows that the CPU is not a bottleneck in this pairing. At 1080p Low, the system achieves 286.3 FPS, which is a very high frame rate that would require significant CPU work to maintain. The fact that the frame rate scales down to 144.1 FPS at 4K Low suggests that the workload shifts to the GPU as the resolution increases, but the CPU is still able to keep up with the simulation demands. The CPU’s 32 MB of shared L3 cache is also beneficial for game logic, as it reduces the need to access slower system memory. The memory bandwidth of 51.2 GB/s is modest, but the game’s data set is not large enough to be constrained by this.
The benchmark results for the Ryzen 5 5600 show a strong multi-threaded performance, with a Cinebench R23 multi-core score of 18309 and a Passmark multithread score of 21541. In a city builder, this multi-threaded capability is useful for background simulation tasks, such as calculating traffic flows or managing resource production. The data indicates that the Ryzen 5 5600 provides enough computational headroom to avoid any noticeable stutters or frame drops, even when the city grows large and complex. While the CPU is not the star of the show, it is a capable partner that does not hold back the RTX 5080 in any meaningful way.
Hardware Specifications
AMD Ryzen 5 5600
NVIDIA GeForce RTX 5080
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600 + NVIDIA GeForce RTX 5080 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 144.1 |
| 3840x2160 | Medium | 108.5 |
| 3840x2160 | High | 83.8 |
| 3840x2160 | Ultra | 53.3 |
| 2560x1440 | Low | 248.5 |
| 2560x1440 | Medium | 205.2 |
| 2560x1440 | High | 153.3 |
| 2560x1440 | Ultra | 106.2 |
| 1920x1080 | Low | 286.3 |
| 1920x1080 | Medium | 265.0 |
| 1920x1080 | High | 238.0 |
| 1920x1080 | Ultra | 163.4 |
Steamworld Build with Ryzen 5 5600 + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 5080 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with Ryzen 5 5600 + RTX 5080
Explore FPS benchmarks for other games using this same hardware combination.