Rust

The AMD Ryzen 7 5800X and NVIDIA GeForce RTX 4060 pairing delivers a playable but demanding experience in Rust, with performance scaling predictably from 1080p to 4K. The data shows a system that is capable of high refresh rates at lower resolutions but struggles to maintain smooth framerates at 4K Ultra settings. This analysis breaks down the specific CPU and GPU contributions based on measured benchmark results.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 5800X is an 8-core, 16-thread processor based on the Zen 3 architecture, codenamed Vermeer. It operates with a base clock of 3.80 GHz and a boost clock of 4.70 GHz, which are critical for a game like Rust that relies on single-thread performance for core game logic and physics simulation. The processor’s 32 MB of L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth provide a solid foundation for feeding data to the GPU.

In synthetic benchmarks, the 5800X demonstrates strong multi-threaded capabilities with a Cinebench R23 multi-core score of 15476 and a single-core score of 1574.5. Its 3DMark results show scaling from 943 points in the single-thread test to 7586 in the 16-thread test, indicating good utilization across all cores. The processor’s PassMark multi-thread score of 27732 and integer math score of 94969 further underscore its computational throughput.

For Rust specifically, the CPU’s performance is a significant factor, especially at lower resolutions where the GPU is not the bottleneck. At 1080p Low settings, the system achieves 163 FPS, which is the highest measured result across all configurations. This suggests that the 5800X’s single-thread performance is sufficient to drive high framerates when the graphical load is minimal. However, as resolution and settings increase, the GPU becomes the limiting factor, and the CPU’s role diminishes in terms of frame rate ceiling.

The processor’s 105 W TDP and 7 nm process node (TSMC) contribute to its efficiency, but the benchmark data does not include thermal or power draw measurements in-game. The 5800X’s 81st percentile ranking among all CPUs indicates it is a well-above-average processor, placing it near rivals like the Intel Core Ultra 5 135H (0.1% faster) and AMD Ryzen 5 5600XT (0.6% slower) in average benchmark scores.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the Ryzen 7 5800X and RTX 4060 ranks 2008th out of 3723 tested combos in Rust. This places it in the 54th percentile of all tested configurations, meaning it outperforms roughly 46% of the combos in the database. This mid-pack ranking is somewhat surprising given the individual component performance, but it reflects the demanding nature of Rust and the specific balance of this pairing.

The rank suggests that while the RTX 4060 is a capable GPU, it is not a top-tier performer in Rust at higher resolutions. When compared to the GPU’s nearest rivals, the RTX 4060’s average benchmark score of 17639 is nearly identical to the AMD Radeon HD 7790 (17666, -0.2%) and AMD Radeon 780M (17588, 0.3%). This indicates that the RTX 4060’s raw compute performance is not exceptionally high relative to these older or integrated alternatives, despite its modern architecture.

The combo’s rank also reflects the CPU’s position. The 5800X’s average benchmark score of 29123 is closely matched by the Intel Core i5-13500HX (29270, -0.5%) and Intel Xeon Phi 7210 (29245, -0.4%). This clustering suggests that the CPU is not providing a significant advantage over these rivals in general workloads. In Rust, the combination of this mid-tier GPU and upper-mid-tier CPU results in a system that is competent but not exceptional, aligning with its 2008th rank.

The data indicates that this combo is better suited for 1080p or 1440p gaming, where it can achieve respectable framerates, rather than 4K gaming, where it falls short of the 60 FPS threshold. The rank of 2008 out of 3723 serves as a reference point for users comparing this build against other tested configurations.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data reveals a clear scaling pattern as resolution increases from 1080p to 4K, with the GPU becoming the primary bottleneck at higher resolutions. At 1080p Low settings, the system achieves 163 FPS, but this drops to 112 FPS at 1440p Low (-31%) and further to 66 FPS at 4K Low (-59% from 1080p). This dramatic decline indicates that the RTX 4060 is struggling to keep up with the increased pixel count, even at the lowest graphical settings.

The pattern is consistent across all settings. At High settings, the FPS drops from 92 FPS at 1080p to 64 FPS at 1440p (-30%) and then to 38 FPS at 4K (-59%). Similarly, at Medium settings, the system goes from 110 FPS at 1080p to 75 FPS at 1440p (-32%) and 44 FPS at 4K (-60%). The Ultra settings show the most severe drop, with 70 FPS at 1080p falling to 48 FPS at 1440p (-31%) and a mere 29 FPS at 4K (-59%).

The consistent ~30% drop from 1080p to 1440p and ~59% drop from 1080p to 4K across all settings strongly suggests the GPU is the limiting factor. If the CPU were the bottleneck, the frame rate would remain relatively flat as resolution increases, since the CPU workload stays constant. Instead, the proportional FPS decline with resolution indicates that the RTX 4060’s 8 GB of VRAM and 128-bit memory bus are being saturated. The GPU’s 272.0 GB/s memory bandwidth is likely insufficient for the high-resolution textures and geometry in Rust, particularly at 4K.

At 1080p and 1440p, the CPU has more headroom, allowing the GPU to be the primary constraint. However, at the lowest settings, the CPU’s role becomes more pronounced, as evidenced by the 163 FPS at 1080p Low, which is a strong result. The data shows that this combo is best utilized at 1080p or 1440p, where it can maintain playable framerates, while 4K gaming requires significant settings reductions to achieve acceptable performance.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the best resolution for this CPU-GPU combo in Rust?

A: Based on the measured FPS, 1080p is the optimal resolution. The system achieves 163 FPS at Low settings and 92 FPS at High settings. At 1440p, the framerate drops to 112 FPS Low and 64 FPS High, which is still playable. 4K is only viable at Low settings with 66 FPS, while Ultra settings drop to an unplayable 29 FPS.

Q: How does the RTX 4060 compare to its closest GPU rivals in average benchmark scores?

A: The RTX 4060 has an average benchmark score of 17639. Its nearest rival, the AMD Radeon HD 7790, scores 17666, which is 0.2% higher. The AMD Radeon 780M scores 17588, which is 0.3% lower. These differences are minimal, indicating similar raw compute performance.

Q: What is the combo’s rank among all tested systems in Rust?

A: The combo ranks 2008th out of 3723 tested combinations. This places it in the middle of the pack, indicating it is a competent but not top-tier configuration for Rust.

Q: What is the FPS difference between 1080p and 4K at High settings?

A: At 1080p High settings, the system achieves 92 FPS. At 4K High settings, the FPS drops to 38, representing a 59% reduction. This highlights the GPU’s limitations at higher resolutions.

Q: Does the CPU or GPU limit performance at higher resolutions?

A: The data indicates the GPU is the limiting factor at higher resolutions. The FPS drops proportionally with resolution increases (e.g., -59% from 1080p to 4K across most settings), which is characteristic of GPU-bound performance. The CPU’s performance is sufficient to avoid being a bottleneck at these resolutions.

Q: What is the launch MSRP of the RTX 4060?

A: The RTX 4060 has a launch MSRP of 299 USD. This is a factual detail from the fact pack, with no further pricing analysis provided.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data provides a comprehensive look at the system’s performance across three resolutions and four quality settings.

1080p (1920x1080):

• Low: 163 FPS average
• Medium: 110 FPS average (min 93, max 126)
• High: 92 FPS average
• Ultra: 70 FPS average

At 1080p, the system is well-suited for high-refresh-rate gaming, with even Ultra settings delivering 70 FPS. The Low setting’s 163 FPS indicates the CPU can drive high framerates when graphical load is minimal. The Medium setting’s min FPS of 93 and max of 126 show some variance, but the average remains smooth.

1440p (2560x1440):

• Low: 112 FPS average
• Medium: 75 FPS average (min 64, max 87)
• High: 64 FPS average
• Ultra: 48 FPS average

1440p represents a balance between visual fidelity and performance. Low settings still achieve 112 FPS, making it viable for competitive play. High settings at 64 FPS are playable, but Ultra drops to 48 FPS, which may be below the threshold for smooth gameplay. The Medium setting’s min FPS of 64 aligns with the High setting average, showing consistency.

4K (3840x2160):

• Low: 66 FPS average
• Medium: 44 FPS average (min 38, max 51)
• High: 38 FPS average
• Ultra: 29 FPS average

4K performance is significantly limited. Only Low settings achieve a playable 66 FPS, while Medium and High are borderline at 44 and 38 FPS, respectively. Ultra settings at 29 FPS are not recommended for smooth gameplay. The Medium setting’s min FPS of 38 indicates potential stuttering during intense scenes.

The data shows a clear pattern: the system is capable at 1080p and 1440p, but 4K requires substantial graphical compromises to maintain playable framerates. The drop from 1080p to 4K is consistent across settings, reinforcing the GPU-bound nature of the system.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4060 is a 40-series GPU based on the Ada Lovelace architecture, built on a 5 nm process node. It features 8 GB of GDDR6 memory on a 128-bit bus, providing 272.0 GB/s of bandwidth. The GPU operates at a base clock of 1830 MHz with a boost clock of 2460 MHz, and its memory runs at 2125 MHz (17 Gbps effective). These specifications are directly relevant to Rust’s performance, particularly at higher resolutions.

The 8 GB VRAM capacity is a critical factor in Rust’s performance at 4K. The game’s high-resolution textures and large world environments can quickly consume VRAM, and the data suggests this is a bottleneck. At 4K Ultra settings, the system only achieves 29 FPS, which is likely due to the GPU hitting its memory capacity limits. The 128-bit memory bus and 272.0 GB/s bandwidth are relatively modest, and the benchmark results show that this is insufficient for smooth 4K gameplay.

The GPU’s shading units (3072), texture mapping units (96), and render output units (48) provide a baseline for its compute capabilities. Its FP32 performance of 15.11 TFLOPS and pixel rate of 118.1 GPixel/s are moderate for the 40-series lineup. In PassMark benchmarks, the GPU scores 19545 in the G3D test and 9213 in the GPU compute test, placing it at the 61st percentile among all GPUs.

The RTX 4060’s performance in Rust is consistent with its mid-range positioning. At 1080p, it delivers strong results, with 92 FPS at High settings. At 1440p, it remains playable at High settings with 64 FPS. However, at 4K, the GPU’s limitations become apparent, with only Low settings achieving a playable framerate. The data indicates that the RTX 4060 is best suited for 1080p and 1440p gaming, while 4K in Rust requires significant settings reductions or a more powerful GPU.

The GPU’s 115 W TDP and dual-slot design suggest it is a power-efficient card, but the benchmark data does not include power draw measurements in-game. The fact that the GPU is marked as “End-of-life” in production status indicates it is being phased out, but its performance in Rust remains relevant for this analysis.