Control

The AMD Ryzen 7 5800X paired with the NVIDIA GeForce RTX 4060 delivers a broad range of performance in Control, scaling from highly playable frame rates at 1080p to a more demanding experience at 4K. The measured data shows a clear narrative: this combo is capable of smooth gameplay at lower resolutions, but the GPU becomes the primary constraint as pixel count rises, with settings playing a decisive role in the final experience.

Resolution Scaling

The frame rate drop from 1920x1080 to 3840x2160 is steep and consistent across all settings, revealing where the bottleneck lies. At High settings, the average FPS falls from 87.1 at 1080p to 67.8 at 1440p, a reduction of roughly 22%, and then plummets to 43 at 4K, a further 37% drop from the 1440p result. This pattern is even more pronounced at Low settings, where the average goes from 141.3 at 1080p to 107.8 at 1440p, and then down to 71.5 at 4K. The scaling suggests that the RTX 4060 is the limiting component at higher resolutions, as the CPU’s role diminishes when the GPU is forced to render significantly more pixels.

The data implies that the sweet spot for this combination is 1440p, where the performance hit from 1080p is manageable but the visual fidelity gain is substantial. At 4K, even the Low preset only manages an average of 71.5 FPS, which is playable but far from the high-refresh territory seen at lower resolutions. The gap between 1080p and 1440p is smaller than the gap between 1440p and 4K, indicating that the GPU’s memory bandwidth and compute capabilities are stretched thin at the highest resolution. This is a typical pattern for a mid-range GPU like the RTX 4060, where 4K gaming requires significant compromises in settings to maintain acceptable frame rates.

CPU Role

The AMD Ryzen 7 5800X is an 8-core, 16-thread processor based on the Zen 3 architecture, with a base clock of 3.80 GHz and a boost clock of 4.70 GHz. Its benchmark scores are strong, with a Cinebench R23 multi-core score of 23571 and a single-core score of 3327. In the context of Control, which is not particularly CPU-intensive, this processor provides ample headroom. The data shows that at 1080p Low settings, the combo achieves 141.3 FPS, which suggests the CPU is not holding back the GPU in less demanding scenarios.

The 5800X’s performance relative to its nearest rivals is tight. It is 0.3% ahead of the AMD Ryzen 7 5800 in average benchmark score, and only 0.4% behind both the AMD Ryzen 5 8500GE and the Intel Core i7-13700H. This indicates that the 5800X is well-positioned within its performance tier, and for a game like Control, the core count and clock speeds are more than sufficient. The processor’s 32 MB of L3 cache and dual-channel DDR4 memory support further ensure that it does not become a bottleneck in most gaming scenarios. The measured FPS at 1080p Ultra, which hits 79.2 average, implies that the CPU can feed the GPU effectively even when the graphical load is high.

GPU Role

The NVIDIA GeForce RTX 4060 is the clear driver of performance in this pairing, particularly as resolution increases. It features 8 GB of GDDR6 memory on a 128-bit bus, providing 272.0 GB/s of bandwidth, and a boost clock of 2460 MHz. The GPU’s 3072 shading units and 24 RT cores are relevant for Control’s visual effects, though the measured data does not isolate ray tracing performance. The GPU’s average benchmark score of 23181 places it in the 66th percentile of all GPUs, with a passmark G3D score of 19545.

The RTX 4060’s nearest rivals show a tight cluster of performance. It is 0.6% behind the AMD Radeon RX 6600M and 0.7% behind the NVIDIA GeForce GTX 780 Ti, while being 0.7% ahead of the Intel Arc B580 and 0.8% ahead of the AMD Radeon 760M. This suggests that the RTX 4060 is a solid mid-range option, but its 8 GB VRAM and 128-bit bus are limiting factors at 4K. The data supports this: at 4K Ultra, the combo only manages 38.4 FPS, which is below the threshold for smooth gameplay. The GPU’s 115 W TDP and dual-slot design indicate it is a power-efficient card, but its performance ceiling is clear in the 4K results.

How This Combo Ranks

In the database of tested combos, this pairing of the Ryzen 7 5800X and RTX 4060 holds a rank of 931 out of 1636 combinations. This places it in the upper-middle tier of all tested systems, suggesting it is a competent but not top-tier configuration. The rank reflects the balanced nature of the components: the CPU is strong, but the GPU is a mid-range part that prevents the combo from reaching higher positions. The data shows that the combo’s performance is highly dependent on resolution and settings, which is typical for a system where the GPU is the primary bottleneck in demanding scenarios.

The rank of 931 out of 1636 implies that there are many combos that outperform this one, particularly those with higher-end GPUs. However, it also means that this setup outperforms a significant portion of tested systems, especially at 1080p and 1440p. The measured FPS at 1080p High (87.1) and 1440p High (67.8) are respectable, indicating that this combo is well-suited for mainstream gaming at those resolutions. The relative position of the CPU and GPU in their respective percentiles (84th for the CPU, 66th for the GPU) suggests that the processor is the stronger component relative to its peers, and the GPU is the limiting factor in the overall ranking.

Settings Recommendations

Based on the measured FPS data, the recommended settings for this combo depend heavily on the target resolution. At 1920x1080, the Ultra preset is viable, with an average of 79.2 FPS, which is smooth for most gamers. The Medium preset offers a more comfortable 102.7 FPS, and Low reaches 141.3 FPS, but the visual trade-offs may not be worth it. For a balance of visual quality and performance, High at 87.1 FPS is a strong choice, providing a crisp image without sacrificing too much speed.

At 2560x1440, the High preset is the best option, delivering 67.8 FPS, which is still playable. The Ultra preset drops to 55.6 FPS, which may be acceptable for some but is on the edge of smoothness. The Medium preset at 72.4 FPS is also a good alternative, offering a slight performance boost over High with minor visual compromises. At 3840x2160, the Low preset is the only viable option for smooth gameplay, hitting 71.5 FPS. The High preset at 43 FPS and Medium at 50 FPS are playable but may feel sluggish, while Ultra at 38.4 FPS is not recommended for a fluid experience.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of this combo’s performance across all tested configurations.

At 1920x1080, the average frame rates are as follows:

• Low: 141.3 FPS
• Medium: 102.7 FPS
• High: 87.1 FPS
• Ultra: 79.2 FPS

At 2560x1440, the average frame rates are:

• Low: 107.8 FPS
• Medium: 72.4 FPS
• High: 67.8 FPS
• Ultra: 55.6 FPS

At 3840x2160, the average frame rates are:

• Low: 71.5 FPS
• Medium: 50 FPS
• High: 43 FPS
• Ultra: 38.4 FPS

The data shows a consistent pattern: as resolution increases, the gap between Low and Ultra settings narrows in absolute terms but widens in percentage terms. At 1080p, the difference between Low and Ultra is 62.1 FPS, while at 4K it is 33.1 FPS. This suggests that the GPU’s limitations become more pronounced at higher resolutions, where even reducing settings cannot fully compensate for the increased pixel workload.

FAQ

*Q: What is the best resolution for this combo in Control?*

A: The data indicates that 2560x1440 is the sweet spot, as it offers a significant visual upgrade over 1080p while maintaining playable frame rates. At 1440p High, the average FPS is 67.8, which is smooth for most players.

*Q: Can this combo handle 4K gaming in Control?*

A: 4K is possible but requires significant settings compromises. The Low preset achieves 71.5 FPS, while the Ultra preset drops to 38.4 FPS. For a smoother experience, the Low or Medium presets are recommended, but the GPU is clearly the limiting factor.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 7 5800X is 0.3% ahead of the AMD Ryzen 7 5800 and 0.4% behind the AMD Ryzen 5 8500GE and Intel Core i7-13700H in average benchmark score. This shows it is competitively positioned within its performance tier.

Q: How does the GPU compare to its nearest rivals?

A: The RTX 4060 is 0.6% behind the AMD Radeon RX 6600M and 0.7% behind the NVIDIA GeForce GTX 780 Ti, while being 0.7% ahead of the Intel Arc B580 and 0.8% ahead of the AMD Radeon 760M. This indicates a tight cluster of mid-range performance.

Q: What is the impact of settings on FPS at 1080p?

A: At 1080p, the average FPS ranges from 141.3 on Low to 79.2 on Ultra. The difference between High and Ultra is only 7.9 FPS, suggesting that Ultra is a reasonable choice if visual fidelity is a priority.

Q: Is the CPU or GPU the primary bottleneck?

A: The data shows that the GPU is the primary bottleneck, especially at higher resolutions. The CPU’s strong benchmark scores and the significant FPS drops with resolution scaling indicate that the RTX 4060 is the limiting component in this pairing.