Rust

The AMD Ryzen 7 5700G paired with the NVIDIA GeForce RTX 5070 Ti is a combination that pits a capable, if older, 8-core CPU against a top-tier Blackwell GPU. In Rust, this pairing produces a wide range of frame rates that are heavily dependent on resolution and settings. The data shows a system that can deliver high refresh rates at 1080p but begins to show its CPU limitations as resolution drops, while the GPU becomes the limiting factor at 4K.

FAQ

Q: What is the best resolution for this combo to maximize frame rates?

A: According to the measured data, the highest average FPS is achieved at 1920x1080. At Low settings, it hits 194.4 FPS, which is the absolute maximum recorded for this combination.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 7 5700G has an average benchmark score of 25626. It is essentially tied with the AMD Ryzen 7 6800U, which is -0.3% slower, and the Intel Xeon D-2752TER, which is 0.4% faster. It also sits close to the Intel Core 5 210H and AMD Ryzen 5 7640U.

Q: Is the RTX 5070 Ti significantly faster than the RTX 4080?

A: The data indicates the two are extremely close. The RTX 5070 Ti has an average score of 52086, while the RTX 4080 has a score of 52085, representing a 0% performance delta. They are effectively identical in overall benchmark scores.

Q: What is the performance difference between the 4K Ultra and 1080p Low settings?

A: The jump is substantial. The 4K Ultra setting averages 50.3 FPS, while 1080p Low averages 194.4 FPS. This represents a performance gain of 144.1 FPS, or roughly 286% higher frame rate when moving to the much lower resolution and settings.

Q: How many total combinations were tested for this ranking system?

A: The comboRankInGame field shows this specific CPU and GPU combination ranks 182nd out of 1717 total tested combos in Rust.

Q: What is the launch MSRP of this GPU?

A: The launch MSRP for the NVIDIA GeForce RTX 5070 Ti is 749 USD.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is the dominant component in this pairing, but its role changes dramatically depending on the workload. With 16 GB of GDDR7 memory on a 256-bit bus, it provides a substantial 896.0 GB/s of memory bandwidth. This is crucial for Rust, a game known for its large, persistent worlds and many assets. The GPU also has a base clock of 2295 MHz and a boost clock of 2452 MHz, supported by 8960 shading units.

However, the data shows that the GPU’s vast resources are not always fully utilized. At 1080p, the CPU is able to feed frames quickly enough, and the GPU is not the primary bottleneck. As the resolution increases to 4K, the pixel throughput demands rise. The GPU’s pixel rate of 235.4 GPixel/s becomes a key factor, and the measured FPS drops significantly at 4K Ultra (50.3 FPS) compared to 1080p Ultra (121.2 FPS). This indicates that at higher resolutions, the RTX 5070 Ti is working much harder, and its performance characteristics are the deciding factor in the final frame rate. The performance delta with the RTX 4080 is 0%, meaning in this metric they are indistinguishable, but the 5070 Ti's 16 GB of VRAM is a clear advantage for high-detail textures.

Resolution Scaling

The measured FPS data reveals a clear and expected trend: performance scales inversely with resolution. At 1080p, the system is capable of very high frame rates, with the Low preset hitting 194.4 FPS and even the Ultra preset maintaining a playable 121.2 FPS. This suggests that at 1080p, the AMD Ryzen 7 5700G is able to keep up with the RTX 5070 Ti, and the CPU is likely the primary limiting factor.

Moving to 1440p, the frame rates drop across all settings. The Low preset falls to 173.1 FPS, a decrease of 21.3 FPS from 1080p. The High preset drops to 109.9 FPS, which is a 45.5 FPS reduction. This indicates that the GPU is starting to take on more of the workload, but the CPU is still a significant contributor to the performance.

At 4K, the GPU becomes the clear bottleneck. The Low preset at 4K (112.9 FPS) is only slightly faster than the High preset at 1440p (109.9 FPS), showing the massive increase in rendering load. The High preset at 4K (66.6 FPS) is a significant drop from its 1440p counterpart, and the Ultra preset (50.3 FPS) is the lowest result in the entire dataset. This scaling pattern tells a story of a well-balanced system at 1080p that becomes increasingly GPU-bound as resolution increases.

Measured FPS Breakdown

The data provides a comprehensive look at average frame rates across three resolutions and four settings presets. At 1920x1080, the performance is high across the board. The Low preset averages 194.4 FPS, which is the highest figure in the dataset. The Medium preset averages 168.9 FPS, and the High preset averages 155.4 FPS. The Ultra preset, while the most demanding, still manages a robust 121.2 FPS.

At 2560x1440, the performance remains strong but drops noticeably. The Low preset is the fastest here, averaging 173.1 FPS. The Medium preset follows at 128.2 FPS, which is a significant step down. The High preset averages 109.9 FPS, and the Ultra preset drops further to 82.3 FPS. The gap between Low and Ultra at this resolution is 90.8 FPS, showcasing the performance cost of the higher detail levels.

At 3840x2160, the GPU is pushed hard. The Low preset still provides a solid experience at 112.9 FPS. The Medium preset drops to 74.3 FPS, and the High preset averages 66.6 FPS. The Ultra preset is the most demanding, yielding an average of 50.3 FPS. This final result is the only one that falls below the 60 FPS threshold, indicating that the Ultra preset at 4K is too demanding for this combination to maintain a smooth experience.

How This Combo Ranks

This specific configuration, the AMD Ryzen 7 5700G with the NVIDIA GeForce RTX 5070 Ti, ranks 182nd out of 1717 tested combinations in Rust. This places it in the top 10.6% of all tested systems, which is a strong showing. The ranking reflects the overall capability of the system across all tested resolutions and settings.

The CPU itself sits in the 83rd percentile when compared to all other CPUs in the benchmark database. Its performance is nearly identical to the AMD Ryzen 7 6800U (-0.3%) and the Intel Xeon D-2752TER (+0.4%). This indicates that while the 5700G is not a top-of-the-line processor anymore, it is by no means a slouch and provides a solid foundation for the powerful GPU.

The GPU is in the 87th percentile compared to all other GPUs. Its average benchmark score of 52086 is essentially a dead heat with the NVIDIA GeForce RTX 4080 (52085) and slightly behind the AMD Radeon RX 7700S (-0.8%). This high percentile reinforces that the RTX 5070 Ti is a top-tier graphics card, and its pairing with a mid-range CPU from a previous generation is what likely prevents this combo from ranking even higher.

Settings Recommendations

Given the measured data, the choice of settings should be driven by the user's display and preference for frame rate versus visual fidelity. For a 1080p display, the Ultra preset is the clear recommendation. The 121.2 FPS average is well above the smoothness threshold for most gamers and allows for the full visual experience of Rust without significant performance sacrifices.

For a 1440p display, the High preset offers the best balance. It delivers a solid 109.9 FPS, which is very playable and maintains a high level of visual detail. The Ultra preset at 82.3 FPS is also playable, but the jump to High provides a substantial 27.6 FPS increase for a modest visual downgrade. The Medium preset at 128.2 FPS is an option for those seeking maximum refresh rates, but High offers a better visual experience for the FPS cost.

For a 4K display, the Medium preset is the best choice for a playable experience. It averages 74.3 FPS, which is a good target for a single-player or co-op survival game. The High preset at 66.6 FPS is also acceptable, but the Medium preset provides a 7.7 FPS improvement. The Ultra preset should be avoided, as the 50.3 FPS average is too low for a consistently smooth experience. The Low preset at 4K (112.9 FPS) is an option for competitive play, but the visual quality is severely compromised. The data shows that this system is best utilized at 1080p and 1440p, where it can fully exploit the power of the RTX 5070 Ti.