Rust

The AMD Ryzen 7 5700G and NVIDIA GeForce RTX 4070 Ti combination delivers a highly playable Rust experience across most settings, but the data reveals a clear shift in performance bottlenecks as resolution increases. At 1080p, the system is likely CPU-limited at lower presets, while at 4K, the GPU becomes the dominant constraint, resulting in a significant frame rate drop that users should plan around.

Resolution Scaling

The measured FPS data shows a pronounced scaling pattern from 1080p to 4K, with the severity of the drop dependent on the graphics preset. At Low settings, the average frame rate falls from 192 FPS at 1920x1080 to 170 FPS at 2560x1440, and then sharply to 107 FPS at 3840x2160. This represents a 44% reduction from 1080p to 4K, indicating that even at the lowest settings, the GPU is being pushed hard by the pixel count at 4K.

Moving to Medium settings, the average FPS declines from 165 at 1080p to 122 at 1440p, and then to 72 at 4K. The 4K result here is 56% lower than the 1080p figure, showing that the Medium preset amplifies the resolution penalty compared to Low. The High preset follows a similar trajectory: 150 FPS at 1080p, 103 FPS at 1440p, and 61 FPS at 4K, a 59% drop from the lowest to highest resolution tested.

The Ultra preset exhibits the most dramatic scaling, starting at 114 FPS in 1080p, dropping to 78 FPS at 1440p, and collapsing to 46 FPS at 4K. That 4K result is 60% below the 1080p score. The trend across all presets indicates that the RTX 4070 Ti’s 12 GB of GDDR6X memory and 504.2 GB/s bandwidth are sufficient for 1080p and 1440p, but the sheer pixel workload at 3840x2160 overwhelms the GPU, making it the clear limiting factor at that resolution.

The data also reveals that at 1080p, the difference between Low (192 FPS) and Medium (165 FPS) is only 27 FPS, while the jump from Medium to High (150 FPS) is another 15 FPS. This relatively small spread suggests the CPU is keeping pace with the GPU at this resolution, as the frame rates remain high across all presets. At 4K, however, the gap between Low (107 FPS) and Medium (72 FPS) widens to 35 FPS, and the drop from Medium to High (61 FPS) is another 11 FPS, confirming that the GPU is struggling with the increased load.

How This Combo Ranks

In the context of all tested combinations, this CPU-GPU pairing achieves a rank of 568 out of 3,723 combos for Rust. This places it in the top 15.3% of all systems tested, indicating a strong overall performance level for this game. The percentile is derived from the combo rank, not from individual component scores, so it reflects the synergy between the Ryzen 7 5700G and the RTX 4070 Ti specifically in Rust.

The CPU itself, the Ryzen 7 5700G, holds a 79th percentile ranking among all CPUs, with an average benchmark score of 27,051. Its nearest rivals include the Intel Core i9-9900K with a score of 27,097 (a 0.2% difference), the AMD Ryzen AI 7 445 at 26,936 (0.4% higher), and the Intel Core i5-14400T at 27,166 (0.4% lower). These tight margins show that the 5700G is well within the performance envelope of several modern and previous-generation processors, making it a balanced match for the GPU.

On the GPU side, the RTX 4070 Ti sits at the 84th percentile of all GPUs, with an average benchmark score of 44,795. Its nearest competitors include the NVIDIA GeForce RTX 5090 Mobile at 45,152 (0.8% higher), the AMD Radeon Pro 5500 XT at 45,384 (1.3% higher), and the NVIDIA RTX A6000 at 44,075 (1.6% lower). The GPU’s percentile is notably higher than the CPU’s, which suggests that in many scenarios, the 5700G might be the weaker link, but the measured Rust data shows that the combo still performs admirably, ranking in the top tier of tested systems.

The rank of 568 out of 3,723 combos implies that while this setup is not at the absolute top, it outperforms a significant majority of alternatives. For Rust, which is known for its demanding server-side and client-side processing, this ranking indicates a well-balanced system that can handle the game’s requirements without major bottlenecks at most resolutions.

GPU Role

The NVIDIA GeForce RTX 4070 Ti is built on the Ada Lovelace architecture with a 5 nm process node from TSMC, featuring 35,800 million transistors on a 294 mm² die. Its base clock is 2310 MHz with a boost clock of 2610 MHz, and it comes with 12 GB of GDDR6X memory on a 192-bit bus, yielding a bandwidth of 504.2 GB/s. The memory clock is listed as 1313 MHz with 21 Gbps effective speed.

In Rust, these specifications translate to specific performance characteristics. The 12 GB VRAM capacity is sufficient for 1080p and 1440p at all presets, as evidenced by the high frame rates at those resolutions. At 4K, the Ultra preset’s 46 FPS average suggests that the memory bandwidth and capacity are being taxed, but the game remains playable. The GPU’s 7680 shading units and 240 texture mapping units help maintain texture detail and geometric complexity, which is critical for Rust’s large open-world environments.

The boost clock of 2610 MHz is a key factor in the GPU’s ability to maintain high frame rates at 1080p, where the 192 FPS Low setting result indicates the card is not hitting a hard ceiling. However, the 4K results show a different story: the 107 FPS at Low settings is still respectable, but the drop to 46 FPS at Ultra indicates that the GPU is the primary bottleneck at this resolution, as the CPU is unlikely to be the limiting factor given its 16 threads and 3.80 GHz base clock.

The RTX 4070 Ti’s 40.09 TFLOPS FP32 performance and 208.8 GPixel/s pixel rate are high, but Rust’s rendering engine appears to be more sensitive to memory bandwidth and raw pixel throughput than raw compute. This is why the 4K Ultra setting produces only 46 FPS, while the 1080p Ultra setting achieves 114 FPS. The GPU’s 80 ROPs are adequate for 1080p and 1440p, but at 4K, the pixel fill rate becomes a limiting factor, particularly with the Ultra preset’s higher draw distances and shadow quality.

FAQ

Q: What is the best resolution for this combo to achieve 60+ FPS consistently?

A: The data shows that at 2560x1440 with High settings, the average FPS is 103, and at 1920x1080 with Ultra settings, it is 114. At 3840x2160, only Low settings (107 FPS) and Medium settings (72 FPS) exceed 60 FPS, while High (61 FPS) is just at the threshold and Ultra (46 FPS) falls below it.

Q: How does the CPU’s performance compare to its nearest rivals?

A: The Ryzen 7 5700G has an average benchmark score of 27,051, which is 0.2% lower than the Intel Core i9-9900K (27,097), 0.4% higher than the AMD Ryzen AI 7 445 (26,936), and 0.4% lower than the Intel Core i5-14400T (27,166). These differences are minimal, indicating similar overall CPU performance.

Q: Is the RTX 4070 Ti’s 12 GB VRAM enough for Rust at 4K?

A: The measured results show that at 3840x2160, the GPU achieves 107 FPS on Low, 72 FPS on Medium, 61 FPS on High, and 46 FPS on Ultra. The fact that frame rates drop significantly with higher presets suggests that while the VRAM capacity is not exceeded, the memory bandwidth and GPU compute are insufficient for Ultra settings at this resolution.

Q: What is the performance gap between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset yields an average of 170 FPS, while the Ultra preset yields 78 FPS. This represents a 54% reduction in frame rate from Low to Ultra, indicating that the Ultra preset’s additional visual effects come at a substantial performance cost.

Q: How does this combo rank among all tested systems for Rust?

A: This specific combination of the AMD Ryzen 7 5700G and NVIDIA GeForce RTX 4070 Ti ranks 568th out of 3,723 tested combos, placing it in the top 15.3% of all systems for Rust performance.

Q: Does the CPU’s 16 MB of L3 cache impact Rust performance?

A: The Ryzen 7 5700G has 16 MB of L3 cache, which is relatively modest for a Zen 3 chip. The measured FPS data shows high frame rates at 1080p, suggesting that the cache size is not a bottleneck for this game at lower resolutions, but the 4K results are more likely limited by the GPU.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the user’s resolution and frame rate target. For 1920x1080, the Ultra preset is viable with an average of 114 FPS, and the Medium preset offers 165 FPS for users who prefer higher refresh rates. The Low preset at 192 FPS is excessive for most displays, so Medium or High (150 FPS) provides a better balance of visual quality and performance.

At 2560x1440, the High preset delivers 103 FPS, which is ideal for 100 Hz monitors, while the Medium preset at 122 FPS is suitable for 120 Hz panels. The Ultra preset’s 78 FPS is still playable but may not be worth the visual fidelity trade-off for competitive play. Users with 144 Hz monitors should opt for Medium or Low (170 FPS) to maximize smoothness.

For 3840x2160, the data strongly recommends the Medium preset, which achieves 72 FPS with a minimum of 61 FPS, providing a stable experience above the 60 FPS threshold. The Low preset at 107 FPS is the only other option that comfortably exceeds 60 FPS, but it sacrifices significant visual detail. The High preset at 61 FPS is borderline, and the Ultra preset at 46 FPS is not recommended for 4K gaming with this combo.

The measured minimum FPS values for Medium settings—61 FPS at 4K, 104 FPS at 1440p, and 141 FPS at 1080p—indicate that this preset offers the most consistent frame pacing across all resolutions, making it the safest choice for avoiding stutters. Given that the Medium preset at 4K maintains a minimum above 60 FPS, it is the recommended preset for 4K users, while 1440p users can confidently use High settings without worrying about drops below 100 FPS.

CPU Role

The AMD Ryzen 7 5700G is an 8-core, 16-thread processor based on the Zen 3 architecture with a Cezanne codename, manufactured on TSMC’s 7 nm process. It has a base clock of 3.80 GHz and a boost clock of 4.60 GHz, with 64 KB of L1 cache per core, 512 KB of L2 cache per core, and 16 MB of L3 cache. The CPU supports DDR4 memory on a dual-channel bus with 51.2 GB/s bandwidth, and its 65 W TDP is notably low for an 8-core part.

In Rust, the CPU’s role is most apparent at 1080p, where the frame rates are highest. The 192 FPS result at Low settings suggests that the CPU can feed the GPU adequately at this resolution, as the GPU is not fully saturated. The 16 threads are beneficial for Rust’s server-side simulation and entity processing, which can scale across multiple cores. The boost clock of 4.60 GHz provides strong single-thread performance, which is critical for the game’s main game thread.

The CPU’s benchmark scores reinforce its capability: it achieves 12,830.5 in Cinebench R23 multi-core and 1,494 in single-core, with a Geekbench multi-core score of 9,950 and single-core of 1,894. These numbers indicate that the 5700G is competitive with its nearest rivals, all of which score within 0.6% of its average benchmark. The 79th percentile ranking among all CPUs confirms that this processor is not a significant bottleneck for most gaming scenarios.

However, the 4K data shows that the CPU is not the limiting factor at higher resolutions. The drop from 107 FPS at 4K Low to 46 FPS at 4K Ultra is entirely attributable to GPU load, as the CPU’s frame generation capability does not change with resolution. The 16 MB L3 cache is adequate for Rust’s working set, and the 3.80 GHz base clock ensures consistent performance under sustained loads. The CPU’s 16 PCIe Gen 3 lanes may slightly limit GPU data transfer compared to Gen 4, but the measured results do not show a significant impact at 1080p or 1440p.

Measured FPS Breakdown

At 1920x1080, the system delivers high frame rates across all presets. Low settings average 192 FPS, Medium averages 165 FPS with a minimum of 141 and maximum of 190, High averages 150 FPS, and Ultra averages 114 FPS. The spread from Low to Ultra is 78 FPS, indicating that the GPU has headroom at this resolution.

At 2560x1440, the results show a noticeable decline. Low settings average 170 FPS, Medium averages 122 FPS with a minimum of 104 and maximum of 140, High averages 103 FPS, and Ultra averages 78 FPS. The drop from 1080p to 1440p is most pronounced at High settings, where the frame rate falls from 150 to 103 FPS, a 31% reduction.

At 3840x2160, the frame rates drop significantly. Low settings average 107 FPS, Medium averages 72 FPS with a minimum of 61 and maximum of 83, High averages 61 FPS, and Ultra averages 46 FPS. The 4K Medium preset’s minimum of 61 FPS is the only sub-60 value recorded in the dataset, meaning that all other settings at all other resolutions maintain averages above 60 FPS.

The data reveals that the Medium preset is the most consistent across resolutions, with minimum FPS values of 141 at 1080p, 104 at 1440p, and 61 at 4K. The High preset at 4K exactly matches the 60 FPS threshold with an average of 61, but no minimum is provided, so users should expect occasional dips. The Ultra preset at 4K is the only configuration that falls below 60 FPS on average, making it unsuitable for smooth gameplay at that resolution.