Rust

This combo, pairing AMD’s Ryzen 7 5700G with NVIDIA’s GeForce GTX 1050 Ti, ranks near the bottom of the database’s tested configurations for Rust. The data places it at rank 1692 out of 1717 tested combos, placing it in the bottom percentile of all systems benchmarked for this title. This is a pairing where the GPU’s age and limited memory capacity create a significant bottleneck, and the measured frame rates confirm that this is not a configuration suited for modern survival gaming at demanding settings.

How This Combo Ranks

The measured performance data for this system is unequivocal. At rank 1692 out of 1717, this combination sits in the 2nd percentile of all tested hardware configurations for Rust. This is a decisive indicator that the system is severely underpowered for the game’s current engine demands. The CPU is not the primary culprit; the Ryzen 7 5700G is a capable 8-core, 16-thread processor from AMD’s 5000 series, built on the Zen 3 architecture. Its benchmark scores, such as a Cinebench R23 multicore score of 20755 and a Passmark multithread score of 24419, place it in the 83rd percentile of all CPUs, showing it has ample processing headroom. The bottleneck is almost entirely the graphics subsystem. The GPU, a GTX 1050 Ti, sits in the 30th percentile of all GPUs, and its performance is the limiting factor that drags the entire system down to this low rank.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the decisive component in this pairing’s poor performance. Its specifications, while modest, are the key to understanding the benchmark results. The card features 4 GB of GDDR5 memory on a 128-bit bus, providing a memory bandwidth of 112.1 GB/s. In a game like Rust, which is known for its large, persistent worlds and high texture memory usage, this 4 GB capacity is a critical weakness. The GPU’s clock speeds are also a factor; with a base clock of 1291 MHz and a boost clock of 1392 MHz, it provides a raw compute throughput of 2.138 TFLOPS. This is insufficient for the game’s rendering workload, particularly at higher resolutions. The data shows that even at the lowest settings, the GPU struggles to maintain playable frame rates at higher resolutions, confirming that its 4 GB frame buffer and limited shader power (768 shading units) are the primary constraints. The GPU’s overall benchmark average score of 5316, which is nearly tied with the NVIDIA GeForce 940M, further validates its position as a low-tier performer.

Resolution Scaling

The measured FPS data reveals a stark scaling pattern that highlights the GPU’s limitations. At 1080p, the system shows its best performance, but it is still insufficient for smooth gameplay at higher presets. The frame rate drops precipitously as resolution increases, demonstrating that the GTX 1050 Ti is overwhelmed by the increasing pixel count. At 1080p Low, the system achieves an average of 52.8 FPS, which is the only playable result in the entire dataset. Moving to 1440p at Low settings, the average FPS falls to 37.0. At 4K with Low settings, it drops further to 21.0 FPS. This scaling is characteristic of a GPU-bound scenario, where the graphics card’s fill rate and memory bandwidth are the limiting factors. The CPU’s role is diminished as resolution increases, but the data shows the GPU simply cannot keep up with the demands of Rust at anything above 1080p. The performance gap between 1080p and 4K at the same settings is significant; for example, at High settings, the average FPS drops from 28.3 at 1080p to 10.2 at 4K, a 64% reduction. This indicates that the GPU is the sole limiting component, as the Ryzen 7 5700G has far more performance headroom than the GTX 1050 Ti can utilize.

FAQ

Q: What is the best resolution and settings combination for this system?

A: The only configuration that achieves a playable frame rate is 1080p with Low settings, which yields an average of 52.8 FPS. All other tested settings at 1080p and all tested settings at higher resolutions fall below 40 FPS, with most below 30 FPS.

Q: How does the CPU's performance compare to its direct rivals?

A: The Ryzen 7 5700G is well-matched with its nearest rivals in the database. It is 0.3% behind the AMD Ryzen 7 6800U, 0.4% ahead of the Intel Xeon D-2752TER, and 0.5% ahead of the Intel Core 5 210H in average benchmark scores, indicating it is a strong mid-range processor.

Q: Is the GTX 1050 Ti a significant bottleneck for the Ryzen 7 5700G?

A: Yes, the data indicates a severe bottleneck. The CPU is in the 83rd percentile of all CPUs, while the GPU is in the 30th percentile of all GPUs. The frame rates at all resolutions are limited by the GPU, as evidenced by the massive FPS drop when increasing resolution from 1080p to 4K.

Q: How does the GTX 1050 Ti's performance compare to its nearest rivals?

A: The GPU is nearly identical in performance to its closest competitors. It has a 0% delta compared to the NVIDIA GeForce 930A, is 0.4% faster than the GeForce 940M, and is 0.7% faster than the AMD Radeon R7 240, confirming its position at the very bottom of the performance hierarchy.

Q: Does increasing the graphics settings from Low to Ultra have a significant impact on performance?

A: Yes, the impact is substantial. At 1080p, changing from Low to Ultra reduces the average FPS from 52.8 to 22.3, a drop of over 57%. This trend is consistent at all resolutions, showing that the GPU cannot handle the increased workload of higher presets.

Q: What does the combo rank of 1692 out of 1717 signify?

A: It signifies that this hardware combination is among the worst-performing configurations for Rust in the entire benchmark database. It is not a viable system for a smooth gaming experience, as even the best-case scenario (1080p Low) is only marginally playable.

Settings Recommendations

Based on the measured FPS data, there is only one viable path for this system. The 1080p Low preset, with an average of 52.8 FPS, is the only configuration that provides a semblance of playable performance. While not ideal, it is the only option that avoids the sub-30 FPS averages seen elsewhere. The Medium preset at 1080p drops to 37.5 FPS, which is playable but may feel inconsistent in a game like Rust where split-second reactions are important. The High preset at 1080p (28.3 FPS) and Ultra preset at 1080p (22.3 FPS) are not recommended, as they fall below the threshold for smooth gameplay. At 1440p and 4K, all settings produce average frame rates below 37 FPS, with most below 25 FPS, making them effectively unplayable. Therefore, the only sensible recommendation is to run the game at 1920x1080 with the Low quality preset. Users should expect to lower other graphical options not shown here to maximize consistency, but the data shows that any increase in resolution or quality will result in a significant performance penalty.