Rust

The data for Rust with the AMD Ryzen 5 4600G and NVIDIA GeForce RTX 5060 shows a system that scales predictably with resolution, but with performance characteristics that suggest a balanced pairing for this particular survival title. The measured frame rates across 1080p, 1440p, and 4K reveal where the bottleneck shifts between the CPU and GPU, and the overall combo ranking places this configuration in a specific tier of tested hardware.

Resolution Scaling

The FPS drop from 1080p to 4K is significant across all settings, indicating that the GPU becomes the primary limiting factor at higher resolutions. At 1080p Low, the system achieves 155.8 FPS, which drops to 121.8 FPS at 1440p and further to 70.4 FPS at 4K. This represents a 22% reduction from 1080p to 1440p and a 55% reduction from 1080p to 4K. The scaling pattern suggests that the RTX 5060's 8 GB GDDR7 memory and 128-bit bus are sufficient for 1080p and 1440p, but the 4K workload begins to strain the GPU's pixel throughput capabilities.

At High settings, the resolution scaling is even more pronounced. The system delivers 96.9 FPS at 1080p, 66.4 FPS at 1440p, and 41.3 FPS at 4K. The drop from 1080p to 1440p is 31%, while the drop from 1440p to 4K is 38%. This steeper decline at higher settings points to the GPU's 48 ROPs and 19.18 TFLOPS FP32 performance being the limiting factor, as the rendering complexity of Rust's environments increases with resolution.

Ultra settings show the most dramatic scaling curve. The system starts at 74.9 FPS at 1080p, falls to 54.1 FPS at 1440p, and bottoms out at 31.5 FPS at 4K. The 4K Ultra result is below the 60 FPS threshold most gamers consider playable, suggesting that this combo is best suited for 1080p or 1440p gaming with high settings, rather than pushing maximum resolution and quality simultaneously.

The Low-to-Ultra performance gap at each resolution also reveals the GPU's headroom. At 1080p, the difference between Low and Ultra is 80.9 FPS (155.8 vs 74.9), while at 4K the gap narrows to 38.9 FPS (70.4 vs 31.5). This narrowing at 4K confirms that the GPU is the bottleneck at higher resolutions, as the additional load from Ultra settings cannot be fully realized when the GPU is already saturated.

CPU Role

The AMD Ryzen 5 4600G provides 6 cores and 12 threads based on the Zen 2 architecture, clocked at 3.70 GHz base and 4.20 GHz boost. Its benchmark scores show a single-thread result of 726 in 3dmark_single_thread and 1919 in Cinebench R23 single-core, which are moderate figures for a 4000-series desktop processor. In Rust, which relies heavily on single-threaded performance for its game logic and world simulation, this CPU can handle the 1080p and 1440p workloads without becoming the primary constraint.

The multi-threaded capabilities of the 4600G are more substantial, with a Cinebench R23 multi-core score of 13593 and a Passmark multithread score of 15992. These results indicate that the CPU can manage the background tasks and server-side computations typical of Rust's survival gameplay. However, the L3 cache is limited to 8 MB shared, which may impact performance in scenarios with large numbers of entities or complex base structures.

The CPU's memory bandwidth of 51.2 GB/s via dual-channel DDR4 is adequate for this game, though it does not match the bandwidth of newer platforms. The 4600G's PCIe Gen 3 interface with 20 lanes means the RTX 5060, which uses PCIe 5.0 x8, will run at a reduced bandwidth, but this does not appear to bottleneck the measured results. The data shows that at 4K Ultra, the FPS drops to 31.5, which is a CPU-independent result — the GPU is clearly the limiting factor at that resolution and settings combination.

GPU Role

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture with a GB206 chip and features 3840 shading units, 120 TMUs, and 48 ROPs. Its boost clock of 2497 MHz and 8 GB of GDDR7 memory on a 128-bit bus deliver 448.0 GB/s of bandwidth. These specifications provide strong performance at 1080p and 1440p, as evidenced by the measured FPS results.

The GPU's 30 RT cores and 120 tensor cores support modern rendering features, though Rust does not heavily utilize ray tracing. The 19.18 TFLOPS FP32 performance and 299.6 GTexel/s texture rate are sufficient for the game's voxel-based terrain and building systems. At 1080p Medium, the system hits 115.5 FPS, which is smooth for competitive play, while 1080p High at 96.9 FPS remains above the 60 FPS threshold.

The RTX 5060's nearest rival in benchmark scores is the AMD Radeon RX 7700 XT, with a deltaPct of 0, indicating essentially identical average performance. The GPU also sits close to the NVIDIA Tesla M60 (deltaPct 0.5) and RTX 5070 Mobile (deltaPct 0.6), showing that its compute capabilities are comparable to those mid-range and mobile parts. The 8 GB VRAM capacity is a potential limitation for 4K Ultra textures, which the data reflects in the 31.5 FPS result, but for 1080p and 1440p it provides adequate headroom.

FAQ

Q: What is the best resolution and settings combo for this system?

A: The data shows 1080p High at 96.9 FPS or 1440p High at 66.4 FPS provide the best balance of visual quality and frame rate. For higher refresh rates, 1080p Low at 155.8 FPS is available, while 4K Ultra at 31.5 FPS is not recommended for smooth gameplay.

Q: How does this combo rank among all tested combinations?

A: The combo ranks 850 out of 1717 tested combinations in Rust, placing it in the middle of the overall distribution. This indicates that while it is not a top-tier setup, it outperforms a significant portion of tested hardware.

Q: Is the CPU or GPU the bottleneck at 1080p Low?

A: At 1080p Low with 155.8 FPS, the system is likely CPU-limited, as the GPU has enough headroom to render frames quickly. The 4600G's single-thread score of 726 in 3dmark_single_thread suggests the CPU's game logic processing becomes the constraint at this high frame rate.

Q: What is the FPS difference between Low and Ultra at 1440p?

A: At 1440p, Low produces 121.8 FPS while Ultra produces 54.1 FPS, a difference of 67.7 FPS. This shows that the Ultra settings impose a significant load on the GPU, nearly halving the frame rate compared to Low.

Q: How does the RTX 5060 compare to its nearest GPU rival?

A: The RTX 5060 has an average benchmark score of 30109, which is 0% different from the AMD Radeon RX 7700 XT. It is 0.5% ahead of the NVIDIA Tesla M60 and 0.6% ahead of the RTX 5070 Mobile.

Q: What is the minimum FPS observed across all tested configurations?

A: The lowest average FPS in the data is 31.5 at 4K Ultra settings. The highest is 155.8 at 1080p Low, showing a wide performance range based on resolution and quality settings.

How This Combo Ranks

In the context of all tested combinations, this pairing of the AMD Ryzen 5 4600G and NVIDIA GeForce RTX 5060 ranks 850 out of 1717, which places it at approximately the 50th percentile. This mid-pack ranking is consistent with the component specifications: the CPU sits at the 75th percentile among all CPUs, while the GPU is at the 73rd percentile among all GPUs. The combination of two mid-range parts yields a system that is capable but not exceptional.

The CPU's nearest rivals include the AMD Ryzen 3 PRO 5355GE (0% delta), Intel Core i5-12450H (0.1% delta), and Intel Core i3-14100T (-0.8% delta), showing that the 4600G is competitive with other mid-tier processors. The GPU's performance is similarly situated, with the RX 7700 XT matching it exactly and the Tesla M60 and RTX 5070 Mobile within 0.6% difference.

The rank of 850 suggests that there are 849 combinations that perform better in Rust, likely including systems with higher-end CPUs like Ryzen 7000-series or Intel 13th/14th-gen parts paired with RTX 4070-class or better GPUs. However, the fact that this combo outperforms 867 other tested configurations indicates it is a viable choice for 1080p and 1440p gaming in Rust.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all settings. Low settings produce 155.8 FPS, Medium produces 115.5 FPS, High produces 96.9 FPS, and Ultra produces 74.9 FPS. All of these results are above the 60 FPS threshold, making 1080p the most comfortable resolution for this combo.

At 2560x1440, performance remains playable but with more variance. Low settings hit 121.8 FPS, Medium drops to 80.7 FPS, High falls to 66.4 FPS, and Ultra bottoms out at 54.1 FPS. The Ultra setting at 1440p is below 60 FPS, so users seeking smooth performance should stick to High or lower.

At 3840x2160, the frame rates drop significantly. Low settings produce 70.4 FPS, Medium produces 47.3 FPS, High produces 41.3 FPS, and Ultra produces 31.5 FPS. Only the Low setting at 4K reaches playable frame rates, and even then it is marginal. The 8 GB VRAM and 128-bit memory bus limit the GPU's ability to handle 4K textures and geometry effectively.

The data across all resolutions shows that this system's sweet spot is 1080p with any settings, or 1440p with Low to High settings. The RTX 5060's 8 GB GDDR7 memory is sufficient for these scenarios, while the 4600G's 6-core/12-thread configuration provides adequate processing power. For 4K gaming, users would need to lower settings to Low to achieve acceptable performance, which undermines the visual benefits of the higher resolution.