Roblox

Roblox is a sandbox title that rarely stresses high-end hardware, yet the data for the Intel Core i7-14700KF and NVIDIA GeForce RTX 4070 Ti SUPER shows a fascinating interplay between a 20-core CPU and a 16 GB GPU. The benchmark results reveal that this combo is not just capable, but dramatically overqualified, producing frame rates that push far beyond standard display refresh rates. This analysis digs into the measured FPS to understand where the bottleneck lies and what the numbers imply for gameplay.

CPU Role — cores, clocks, and how they relate to this game's results

The Intel Core i7-14700KF is a 20-core, 28-thread processor based on the Raptor Lake architecture, running on a 10 nm process. Its base clock is 3.40 GHz, with a boost clock reaching 5.60 GHz. This high boost clock is likely a primary driver of the exceptional single-threaded performance observed in the data, which is critical for Roblox, a game that often relies heavily on a single core for its main simulation and physics threads. The CPU's benchmark scores show a single-core Cinebench R23 result of 6290 points and a multi-core score of 44557 points, indicating that even when the game does spread its load, the processor has immense headroom.

The CPU’s 33 MB of shared L3 cache and 2 MB per-core L2 cache also help reduce latency, which can be important in a game where many small assets and scripts load dynamically. The data suggests that at lower resolutions, the CPU is the limiting factor, but not because it is weak—rather, because the GPU is so fast that it can expose the maximum frame rate the CPU can feed. For instance, at 1080p Low settings, the combo achieves 594.2 FPS, which reflects the CPU's ability to handle even the most rapid-fire draw calls and game logic updates. The processor sits in the 96th percentile for all CPUs, and its average benchmark score of 70104 places it virtually tied with the Intel Core i7-14700K (deltaPct 0.0%) and the AMD Ryzen 9 9950X (deltaPct -0.4%), confirming that its position in the market is at the very top tier for gaming workloads.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the highest average frame rate achieved by this combo?

A: The highest average frame rate recorded is 594.2 FPS, achieved at 1920x1080 resolution with Low settings. This suggests that in undemanding scenes, the hardware is capable of outputting an enormous number of frames per second.

Q: How does the CPU's multi-core performance compare to its nearest rivals?

A: According to the average benchmark scores, the i7-14700KF scores 70104, which is essentially identical to the Intel Core i7-14700K (70074, deltaPct 0.0%). It is 0.3% ahead of the AMD EPYC 9115 (69887) but 0.4% behind the AMD Ryzen 9 9950X (70420).

Q: Does the GPU's memory bandwidth play a significant role in these results?

A: The GPU has a memory bandwidth of 672.3 GB/s, delivered via a 256-bit bus with 16 GB of GDDR6X memory. While this is a high figure, the frame rates in Roblox are so high that it's unlikely the memory bandwidth is the primary constraint; the sheer computational speed of the GPU is more relevant.

Q: Is there a large performance gap between the Low and Ultra settings?

A: Yes, the gap is significant. At 4K, the difference between Low (226.9 FPS) and Ultra (144.4 FPS) is 82.5 FPS, a 36% drop in performance when moving to the highest settings. This shows that Ultra settings do impose a substantial load on the GPU, even for a light game like Roblox.

Q: What is the overall ranking of this combination among all tested combos for Roblox?

A: The combo is ranked 215th out of 1800 tested combinations, placing it in the top 12% of all systems. This indicates that while it is not the absolute fastest setup ever tested, it is far more powerful than the vast majority of systems used to play the game.

Q: How does the GPU's raw compute power (FP32) compare to its rivals?

A: The RTX 4070 Ti SUPER has an FP32 performance of 44.10 TFLOPS. Its average benchmark score is 48704, which is 1.6% higher than the NVIDIA RTX A2000 (47915) and 2% higher than the NVIDIA RTX A1000 Mobile (47743), but 0.7% lower than the NVIDIA CMP 50HX (49071).

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The scaling of frame rates across resolutions reveals a classic shift from a CPU-bound scenario to a more GPU-bound one. At 1080p with High settings, the system produces 479.6 FPS. Moving to 1440p High, the frame rate drops to 319.4 FPS, a reduction of 33.4%. Going from 1440p to 4K High brings the frame rate down to 179.7 FPS, another 43.7% reduction. This pattern of significant drops with each resolution increase indicates that the GPU is becoming the limiting factor as the pixel count rises.

However, the absolute numbers are still incredibly high. Even at 4K Ultra, the system maintains 144.4 FPS, which is well above the refresh rate of most monitors. The data implies that the CPU, with its 5.60 GHz boost clock, is powerful enough to feed frames to the GPU at 1080p, but the GPU's rendering load at higher resolutions begins to outpace the CPU's ability to issue draw calls. The 1080p Low result of 594.2 FPS serves as a near-pure measure of CPU performance, as the GPU is likely idle waiting for instructions. The scaling shows that if a user wants to maximize frame rates, lowering the resolution will yield massive gains, but if they want a consistent, high-refresh experience, the GPU is more than adequate for 4K Ultra in this title.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the measured average FPS are as follows: Low settings produce 594.2 FPS, Medium settings yield 537.1 FPS, High settings drop to 479.6 FPS, and Ultra settings result in 384.5 FPS. The performance hit from Low to Ultra is 209.7 FPS, a substantial 35% reduction, showing that even at 1080p, visual quality settings have a noticeable impact on the frame rate.

Moving to 2560x1440, the averages are 394.9 FPS for Low, 357.5 FPS for Medium, 319.4 FPS for High, and 261.2 FPS for Ultra. The gap between Low and Ultra here is 133.7 FPS, which is a smaller absolute difference than at 1080p but still represents a 34% performance reduction. Finally, at 3840x2160, the results are 226.9 FPS for Low, 203.7 FPS for Medium, 179.7 FPS for High, and 144.4 FPS for Ultra. The cumulative effect of resolution and settings is clear: the difference between 1080p Low and 4K Ultra is a staggering 449.8 FPS, illustrating the massive headroom this hardware has.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4070 Ti SUPER is built on the Ada Lovelace architecture using a 5 nm process at TSMC. It features 16 GB of GDDR6X memory and a boost clock of 2610 MHz. The data shows that the GPU is not a bottleneck in this game until the resolution and settings are pushed to their limits. The card’s high pixel rate of 250.6 GPixel/s and texture rate of 689.0 GTexel/s allow it to handle the simple, blocky textures and geometry of Roblox with ease, even at 4K.

The GPU's performance percentile is 86, and its average benchmark score is 48704, which is close to its nearest rivals. However, in Roblox, the game is so lightweight that the GPU's massive FP32 compute power (44.10 TFLOPS) is largely underutilized. The memory clock of 1313 MHz, yielding 21 Gbps effective speed, provides the bandwidth needed to sustain those high frame rates without any apparent memory-related stutters. The fact that the card is marked as "End-of-life" in production status doesn't diminish its capability here; the data shows it is more than sufficient for the demands of Roblox, with the 4K Ultra setting being the only scenario where the GPU's workload becomes significant enough to bring the frame rate below the 150 FPS mark.

Settings Recommendations — which preset gives the best experience per the measured rows

Given the measured data, the optimal settings depend heavily on the user's display refresh rate. For users with a standard 144 Hz monitor, the 4K Ultra preset, which averages 144.4 FPS, is the best choice as it provides the highest visual quality while still hitting the refresh rate target. This is the most balanced option, offering the most detailed visuals without sacrificing smoothness.

For users with a 240 Hz monitor, the 1440p High preset (319.4 FPS) or even 4K High (179.7 FPS) would be excellent choices. The 1440p High setting provides a massive frame rate cushion, ensuring that even in complex scenes with many players, the frame rate is unlikely to dip below the monitor's refresh rate. If a user prioritizes absolute smoothness over visual fidelity, the 1080p Low setting at 594.2 FPS is available, but this is likely unnecessary.

The data suggests that the "Medium" preset is a poor choice for this hardware. It offers only a marginal visual improvement over Low while costing a significant number of frames (e.g., 56.6 FPS at 1080p). The "High" preset appears to be the sweet spot for high-refresh gaming, as it offers a substantial visual upgrade over Medium for a relatively smaller frame rate cost (e.g., 57.5 FPS at 1440p). Ultimately, the measured rows indicate that High or Ultra at 1440p or 4K are the most sensible choices, as they leverage the GPU's power without pushing frame rates to absurd, unviewable levels.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the Intel Core i7-14700KF and the NVIDIA GeForce RTX 4070 Ti SUPER is ranked 215th out of 1800 tested combos in Roblox. This places it in the top 11.9% of all systems, which is a strong showing, but it is not the absolute top-tier configuration. The data implies that there are 214 combinations that deliver even higher average frame rates in this specific game, likely consisting of the most extreme enthusiast CPUs (like the Ryzen 9 9950X) paired with the fastest flagship GPUs.

Given that the CPU is tied with the Ryzen 9 9950X in average benchmark scores, the difference in rank is likely attributable to the GPU. The RTX 4070 Ti SUPER, while powerful, is not the fastest GPU available, and the combos above it probably feature GPUs with higher raw throughput. However, the rank also suggests that for the vast majority of users, this system is overkill for Roblox. The frame rates achieved are so high that the difference between this combo and the #1 ranked combo would be imperceptible on any commercially available monitor, which typically max out at 360 Hz or 500 Hz. This rank indicates a system that is in the upper echelon of performance, where further gains would be purely academic in the context of this game.